Ana Sayfa / IFM / IFM LK1224

Talep üzerine temin edilir

IFM LK1224

Name: IFM LK1224
Brand: IFM
SKU: LK1224

MPN: LK1224 · Marka: IFM

Fiyat için sorun

Teklif İsteyin

12 ay garanti (yeni) · 3 ay (kullanılmış/yenilenmiş)

30 gün iade, kullanılmamış parçalarda stok ücreti yok

Gönderim şekli

Hızlı bilgiler

Uygunluk	Talep üzerine onaylanır
Kategori	All level sensors
Garanti	12 ay (yeni) · 3 ay (kullanılmış/yenilenmiş)

Gönderim ve uygunluk

LK1224 ne zaman gönderilebilir?

LK1224 talep üzerine temin ediliyor — bir teklif isteyin, bu spesifik ürün için tam uygunluk ve gönderim süresini onaylayalım.

LK1224 ürününü şahsen teslim alabilir miyim?

Groningen, Hollanda'daki depomuzdan şahsen teslim alma mümkün olabilir — sipariş vermeden önce uygunluğu kontrol etmek ve bir teslim alma zamanı ayarlamak için bizimle iletişime geçin.

Ekspres teslimat mevcut mu?

Evet — LK1224 için teklif isterken bunu belirtin, yanıtımızda ekspres gönderim seçeneklerini de sunalım.

Fabrikamız durdu ve buna acilen ihtiyacımız var — yardımcı olabilir misiniz?

Kritik bir arıza durumunda doğrudan +31 (0)50-7110348 numarasından veya sales@partnerplc.com adresinden bizimle iletişime geçin — uygunluk ve varış yerine bağlı olarak LK1224 için aynı gün kurye veya özel taşıma seçeneklerini değerlendirebiliriz.

For the reliable level control in tanks and containers Suitable for water, oils and coolants Clearly visible 4-digit LED display When used as overflow prevention with approval according to the German Federal Water Act (WHG) Convenient operation via buttons or parameter setting via IO-Link

Teknik özellikler

Product characteristics

Number of inputs and outputs	Number of digital outputs: 2
Factory setting	hydrous coolants; water; media similar to water
Probe length L[mm] [mm]	728

Application

Special feature	Gold-plated contacts
Media	hydrous coolants; oils; oil-based media; water; media similar to water
Dielectric constant of the medium	> 2
Cannot be used for	extremely conductive media; adhering media; granulates; bulk material; acids; alkali; hygienic areas and electroplating applications
Maximum speed of the change of level[mm/s] [mm/s]	300
Tank pressure	0.5; (unpressurized for applications to WHG (German Federal Water Act)) bar; 0.05; (unpressurized for applications to WHG (German Federal Water Act)) MPa
0.5; (unpressurized for applications to WHG (German Federal Water Act)) bar	0.05; (unpressurized for applications to WHG (German Federal Water Act)) MPa
Medium temperature[°C] [°C]	0...35; (with climatic tube E43102: 35...55 °C; not for applications to WHG (German Federal Water Act))
Medium temperature short time[°C] [°C]	0...90; (< 1 h)

Electrical data

Operating voltage[V] [V]	12...30 DC
Current consumption[mA] [mA]	< 50
Protection class	III
Reverse polarity protection	yes
Power-on delay time[s] [s]	< 3

Inputs / outputs

Number of inputs and outputs

Number of digital outputs: 2

Outputs

Total number of outputs	2
Output signal	switching signal; IO-Link
Electrical design	PNP/NPN
Number of digital outputs	2
Max. voltage drop switching output DC[V] [V]	2.5
Permanent current rating of switching output DC[mA] [mA]	200
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes

Measuring/setting range

Factory setting	hydrous coolants; water; media similar to water
Probe length L[mm] [mm]	728
Active range A[mm] [mm]	585
Inactive range I1 / I2[mm] [mm]	104 / 39
Set point SP[mm] [mm]	60...590
Reset point rP[mm] [mm]	50...580
In steps of[mm] [mm]	10
Reference point OP[mm] [mm]	200 - 240 - 280 - 310 - 350 - 390 - 420 - 460 - 500 - 530 - 570 - 610 - OFF
Hysteresis, OP[mm] [mm]	4

Accuracy / deviations

Measuring error[% of the final value] [% of the final value]	± 5
Repeatability	± 2
Resolution[mm] [mm]	5

Software / programming

Parameter setting options

hysteresis / window; normally open / normally closed; switching logic; SP/rP position; adjustment OP; medium selection; offset setting; switch-on/switch-off delay

Interfaces

Communication interface	IO-Link
Transmission type	COM2 (38,4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9
Profiles	Smart Sensor - SSP 0; Generic Profiled Sensor; Function; Device identification; Function; Process data variable; Function; Device diagnosis
Smart Sensor - SSP 0	Generic Profiled Sensor
Function	Device diagnosis
SIO mode	yes
Required master port type	A
Process data analogue	3
Process data binary	2
Min. process cycle time[ms] [ms]	3.2
Supported DeviceIDs	default; 804
default	804

Operating conditions

Ambient temperature[°C] [°C]	0...60
Storage temperature[°C] [°C]	-25...80
Protection	IP 67

Tests / approvals

Approval	WHG; General building authority approval; overflow prevention
EMC	DIN EN 61000-6-2; DIN EN 61000-6-4
Shock resistance	DIN EN 60068-2-27; 15 g (11 ms)
DIN EN 60068-2-27	15 g (11 ms)
Vibration resistance	DIN EN 60068-2-6; 5 g (10...2000 Hz)
DIN EN 60068-2-6	5 g (10...2000 Hz)
MTTF[years] [years]	266

Mechanical data

Weight[g] [g]	520.8
Dimensions[mm] [mm]	Ø 16
Materials	stainless steel (304/1.4301); stainless steel (316L/1.4404); FKM; NBR; PBT; PC; PA; PP; TPV
Materials (wetted parts)	PP

Displays / operating elements

Display	Display unit; 2 x LED, green (cm, inch); switching status; 2 x LED, yellow; measured values; alphanumeric display, 4-digit; parameter setting; alphanumeric display, 4-digit
Display unit	2 x LED, green (cm, inch)
switching status	2 x LED, yellow
measured values	alphanumeric display, 4-digit
parameter setting	alphanumeric display, 4-digit