ISO cylinder-DSBG-...-63- -
Teklif İsteyin
Hızlı bilgiler
| Uygunluk | Talep üzerine onaylanır |
| Kategori | DSBG |
| Yaşam döngüsü | active |
| Garanti | 12 ay (yeni) · 3 ay (kullanılmış/yenilenmiş) |
Gönderim ve uygunluk
DSBG-...-63- - ne zaman gönderilebilir?
DSBG-...-63- - talep üzerine temin ediliyor — bir teklif isteyin, bu spesifik ürün için tam uygunluk ve gönderim süresini onaylayalım.
DSBG-...-63- - ürününü şahsen teslim alabilir miyim?
Groningen, Hollanda'daki depomuzdan şahsen teslim alma mümkün olabilir — sipariş vermeden önce uygunluğu kontrol etmek ve bir teslim alma zamanı ayarlamak için bizimle iletişime geçin.
Ekspres teslimat mevcut mu?
Evet — DSBG-...-63- - için teklif isterken bunu belirtin, yanıtımızda ekspres gönderim seçeneklerini de sunalım.
Fabrikamız durdu ve buna acilen ihtiyacımız var — yardımcı olabilir misiniz?
Kritik bir arıza durumunda doğrudan +31 (0)50-7110348 numarasından veya sales@partnerplc.com adresinden bizimle iletişime geçin — uygunluk ve varış yerine bağlı olarak DSBG-...-63- - için aynı gün kurye veya özel taşıma seçeneklerini değerlendirebiliriz.
ISO 15552 (ISO 6431, VDMA 24562) , Sturdy tie rod design , Self-adjusting pneumatic end-position cushioning saves time during commissioning and adapts optimally to load and speed changes , Comprehensive range of mounting accessories for just about every type of installation , For position sensing , Sustainable thanks to extended life cycle and easier repairs
Teknik özellikler
Specifications
| Stroke | 1, 2800 mm |
| Piston diameter | 63 mm |
| Piston rod thread | M16x1.5, M10 |
| Torsional backlash at piston rod +/- | -0.45, 0.45 deg |
| Based on standard | ISO 15552 |
| Cushioning | Elastic cushioning rings/plates at both ends, Self-adjusting pneumatic end-position cushioning, Pneumatic cushioning, adjustable at both ends |
| Mounting position | optional |
| Conforms to standard | ISO 15552 |
| Piston-rod end | Male thread, Female thread |
| Design | Piston, Piston rod, Tie rod, Cylinder barrel |
| Position detection | Via proximity switch |
| Symbol | 00991217, 00991218, 00991235, 00991237, 00992970, 00992971 |
| Variants | Extended male piston rod thread, Piston rod with female thread, Extended piston rod, Low friction for balancer applications, Metal scraper, With protection against rotation, Uniform, slow movement, Low friction, Through piston rod, Heat-resistant seals max. 120°C, Temperature range 0 to 150°C, Temperature range -40 to 80°C, Piston rod at one end |
| Operating pressure | 0.1, 12 bar |
| Mode of operation | Double-acting |
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) |
| UKCA marking (see declaration of conformity) | To UK EX instructions |
| Explosion protection | Zone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T4 Gb |
| Explosion ignition protection type for dust | Ex h IIIC T120°C Db |
| Explosion ambient temperature | -20°C <= Ta <= +60°C |
| Explosion protection certification outside the EU | EPL Db (GB), EPL Gb (GB) |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress, 3 - high corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L, VDMA24364 zone III |
| Ambient temperature | -40, 150 °C |
| Impact energy in end positions | 1.3 J |
| Cushioning length | 22 mm |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 1682 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 1682, 1870 N |
| Additional weight per piston rod extension of 10 mm | 25 g |
| Additional weight per piston rod thread extension of 10 mm | 14 g |
| Type of mounting | Via female thread, With accessories |
| Pneumatic connection | G3/8 |
| Note on materials | RoHS-compliant |
| Material cover | Coated die-cast aluminium |
| Material piston seal | FPM, HNBR, TPE-U(PU) |
| Material piston | Wrought aluminium alloy |
| Material piston rod | High-alloy stainless steel, hard chrome-plated, High-alloy steel, High-alloy stainless steel |
| Material piston rod wiper | FPM, HNBR, PE, TPE-U(PU) |
| Buffer seal material | FPM, TPE-U(PU) |
| Material of cushioning boss | Wrought aluminium alloy, POM |
| Material cylinder barrel | Smooth-anodised wrought aluminium alloy |
| Material nut | Galvanised steel, High-alloy stainless steel |
| Material rod wiper | Brass, PTFE reinforced |
| Material bearing | Bronze, Metal polymer compound, POM |
| Material collar nut | Galvanised steel |
| Material tie rod | High-alloy steel, High-alloy stainless steel |
| Material swivel mounting | Painted spheroidal graphite cast iron |
| Material bellows | NBR, PA |
Daha fazla Festo parçası
KullanılmışFesto 560207 - HGPT-25-A-B-F Used
Talep üzerine temin edilirPush-in connector-NPQP-D-Q6-S8-FD-P10
Talep üzerine temin edilirPush-in T-fitting-NPQE-LT-R18-Q4-P10