Compact cylinder-DPDM-...-32- -
Teklif İsteyin
Hızlı bilgiler
| Uygunluk | Talep üzerine onaylanır |
| Kategori | DPDM |
| Yaşam döngüsü | active |
| Garanti | 12 ay (yeni) · 3 ay (kullanılmış/yenilenmiş) |
Gönderim ve uygunluk
DPDM-...-32- - ne zaman gönderilebilir?
DPDM-...-32- - talep üzerine temin ediliyor — bir teklif isteyin, bu spesifik ürün için tam uygunluk ve gönderim süresini onaylayalım.
DPDM-...-32- - ürününü şahsen teslim alabilir miyim?
Groningen, Hollanda'daki depomuzdan şahsen teslim alma mümkün olabilir — sipariş vermeden önce uygunluğu kontrol etmek ve bir teslim alma zamanı ayarlamak için bizimle iletişime geçin.
Ekspres teslimat mevcut mu?
Evet — DPDM-...-32- - için teklif isterken bunu belirtin, yanıtımızda ekspres gönderim seçeneklerini de sunalım.
Fabrikamız durdu ve buna acilen ihtiyacımız var — yardımcı olabilir misiniz?
Kritik bir arıza durumunda doğrudan +31 (0)50-7110348 numarasından veya sales@partnerplc.com adresinden bizimle iletişime geçin — uygunluk ve varış yerine bağlı olarak DPDM-...-32- - için aynı gün kurye veya özel taşıma seçeneklerini değerlendirebiliriz.
Mounting using through-hole and female thread , Compact design , Piston rod variants , For position sensing , Sustainable in production thanks to reduced use of materials
Teknik özellikler
Specifications
| Stroke | 5, 50 mm |
| Piston diameter | 32 mm |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | optional |
| Mode of operation | Double-acting, Pushing, Single-acting, Pulling |
| Design | Piston, Piston rod, Profile barrel |
| Position detection | Via proximity switch |
| Variants | Through piston rod, Through, hollow piston rod, Heat-resistant seals max. 120°C, Piston rod at one end |
| Protection against torque/guide | Guide rod with yoke |
| Operating pressure | 1, 8 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 0 - No corrosion stress, 1 - Low corrosion stress, 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom class | Class 6 according to ISO 14644-1 |
| Ambient temperature | -10, 120 °C |
| Theoretical force at 0.6 MPa (6 bar, 87 psi) | 415, 483 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 415 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 415, 483 N |
| Type of mounting | With through-hole, Via female thread |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS-compliant |
| Material cover | Wrought aluminium alloy |
| Material housing | Anodised wrought aluminium alloy |
| Material piston rod | High-alloy stainless steel |
Daha fazla Festo parçası
KullanılmışFesto 560207 - HGPT-25-A-B-F Used
Talep üzerine temin edilirPush-in connector-NPQP-D-Q6-S8-FD-P10
Talep üzerine temin edilirPush-in T-fitting-NPQE-LT-R18-Q4-P10