B&R 8EI017HCSS0.XXXX-1

Name: B&R 8EI017HCSS0.XXXX-1
Brand: B&R
SKU: 8EI017HCSS0.XXXX-1

MPN: 8EI017HCSS0.XXXX-1 · Marka: B&R

Fiyat için sorun

Teklif İsteyin

12 ay garanti (yeni) · 3 ay (kullanılmış/yenilenmiş)

30 gün iade, kullanılmamış parçalarda stok ücreti yok

Gönderim şekli

Hızlı bilgiler

Uygunluk	Talep üzerine onaylanır
Kategori	Cold plate or feed-through mounting
Yaşam döngüsü	active
Garanti	12 ay (yeni) · 3 ay (kullanılmış/yenilenmiş)
Ağırlık	5 kg

Gönderim ve uygunluk

8EI017HCSS0.XXXX-1 ne zaman gönderilebilir?

8EI017HCSS0.XXXX-1 talep üzerine temin ediliyor — bir teklif isteyin, bu spesifik ürün için tam uygunluk ve gönderim süresini onaylayalım.

8EI017HCSS0.XXXX-1 ürününü şahsen teslim alabilir miyim?

Groningen, Hollanda'daki depomuzdan şahsen teslim alma mümkün olabilir — sipariş vermeden önce uygunluğu kontrol etmek ve bir teslim alma zamanı ayarlamak için bizimle iletişime geçin.

Ekspres teslimat mevcut mu?

Evet — 8EI017HCSS0.XXXX-1 için teklif isterken bunu belirtin, yanıtımızda ekspres gönderim seçeneklerini de sunalım.

Fabrikamız durdu ve buna acilen ihtiyacımız var — yardımcı olabilir misiniz?

Kritik bir arıza durumunda doğrudan +31 (0)50-7110348 numarasından veya sales@partnerplc.com adresinden bizimle iletişime geçin — uygunluk ve varış yerine bağlı olarak 8EI017HCSS0.XXXX-1 için aynı gün kurye veya özel taşıma seçeneklerini değerlendirebiliriz.

ACOPOS P3 servo drive, 3x 200-480 VAC, 17 A, SafeMOTION, 1 axis, AS, cold plate or pass-through mounting

Teknik özellikler

Specifications

Dynamic node allocation (DNA)	Yes
Slots for plug-in modules	1
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
UL	cULus E225616 Power conversion equipment
Network configurations	TT, TN, TN-S, TN-C-S, IT
Mains input voltage	3x 200 VAC to 480 VAC ±10%
Frequency	50 / 60 Hz ±4%
Installed load	Max. 18 kVA
Inrush current	Max. 50 A
Switch-on interval	Typically 60 s
Integrated line filter per EN 61800-3, category C3	No
With wire end sleeve	0.25 to 2.5 mm²
UL/C-UL-US	26 to 12 AWG
CSA	26 to 12 AWG
Power dissipation at device nominal power without braking resistor	[37 W + 9.2 V * I + 6.3 W/kW * Pout + 0.25 Ω * I2BR + PVSLOT] * 1.1
Power dissipation remaining in the control cabinet	Pv_inside = 0.58Pv+1.6(T_amb – T_inside)
Max. line length	100 m
Continuous power	4 kW
Mains input voltage <3x 400 VAC	8.5 kW * (Mains input voltage [V] / 400 V)
DC bus capacitance	940 µF
With wire end sleeves	0.25 to 4 mm²
Input voltage	24 VDC ±25%
Input capacitance	5500 µF
Current consumption	1.2 A + Current for motor holding brake
Quantity	1
Continuous power per motor connection	8.5 kW
Continuous current per motor connection	17 Aeff
Switching frequency 5 kHz	75 m
Switching frequency 10 kHz	38 m
Switching frequency 20 kHz	19 m
Starting at 500 m above sea level	1.7 Aeff per 1000 m
Peak current per motor connection	42.5 Aeff
Peak power output	21.25 kW
Nominal switching frequency	5 kHz
Possible switching frequencies	2.5 / 5 / 10 / 20 kHz
Insulation stress of the connected motor per IEC TS 60034-25:2004	Limit value curve A
Overload protection	No
Short-circuit and ground fault protection	Short-circuit protection: Yes Ground fault protection: No
Max. output frequency	598 Hz
U, V, W, PE	Connector
Shield connection	Yes Clamping range of the grounding clamp: 17 to 30 mm
Output voltage	Configurable Typ. 11.45 V ±0.1 V / 5.2 V ±0.1 V
Continuous current per connection	4 A
Max. internal resistance	100 mΩ
Extinction potential	33 V
Max. extinction energy per switching operation	15 Ws
Max. switching frequency	0.5 Hz
Overload and short-circuit protection	Yes
Open-circuit monitoring	Yes
Undervoltage monitoring	Yes
Response threshold for open-circuit monitoring	Max. 70 mA
Response threshold for undervoltage monitoring	Approx. 23 V
Peak power int./ext.	14 kW / 25 kW
Minimum braking resistance (ext.)	25 Ω
Type	Digital multi-encoder interface, configurable
Variant	2x RJ45, shielded, 2-port hub
Line length	Max. 100 m between 2 stations (segment length)
Transfer rate	100 Mbit/s
Connections	8-pin female Mini I/O connector
Status indicators	None
Encoder - ACOPOS P3	No
Max. encoder cable length	75 m Depends on the cross section of the power supply wires in the encoder cable
Load capacity	Max. 300 mA
Sense lines	2, compensation of max. 2x 0.7 V
Short-circuit proof	Yes
Overload-proof	Yes
Signal transmission	RS485
Data transfer rate	Depends on the configured encoder type
Minimum	-25°C
Maximum	55°C
Max. power consumption per encoder interface	PENCODER [W] = U24V [V] * (IENCODER [A] * 0.7) + 0.5 W
Circuit	Sink
Input - ACOPOS P3	Yes
Input - Input	Yes
Nominal	5 to 40°C
Low	<5 V
High	>15 V
Input current at nominal voltage	7 mA
Rising edge	<51 µs
Falling edge	<52 µs
Modulation compared to ground potential	Max. ±38 V
Resistance range	500 Ω to 5 kΩ
mapp Motion	5.05.0 and higher
ACP10/ARNC0	5.03.0 and higher
Power dissipation relative to continuous apparent power	IE2 (10,25) 1% IE2 (50,25) 1% IE2 (10,50) 1.2% IE2 (50,50) 1.3% IE2 (90,50) 1.4% IE2 (10,100) 1.7% IE2 (50,100) 1.9% IE2 (90,100) 2.2%
Nominal losses in standby mode	11.8 W
Hanging vertically	Yes
Horizontal, face up	No
Standing horizontally	No
Pollution degree per EN 61800-5-1	2 (non-conductive pollution)
Overvoltage category per EN 61800-5-1	III
Degree of protection per EN 60529	IP20
Storage	5 to 95%
Transport	95% at 40°C
Operation	5 to 85 %, non-condensing
Width	66 mm
Height	374 mm
Depth	264.50 mm (with 8EXA front cover: 267 mm)
Weight	5 kg