EtherCAT Terminal, 1-channel motion interface, servomotor, 48 V DC, 4.5 A, push-in, OCT
Teklif İsteyin
Hızlı bilgiler
| Uygunluk | Talep üzerine onaylanır |
| Kategori | EL/ED/ELM7xxx | Compact drive technology |
| Yaşam döngüsü | active |
| Garanti | 12 ay (yeni) · 3 ay (kullanılmış/yenilenmiş) |
Gönderim ve uygunluk
ED7211-0010 ne zaman gönderilebilir?
ED7211-0010 talep üzerine temin ediliyor — bir teklif isteyin, bu spesifik ürün için tam uygunluk ve gönderim süresini onaylayalım.
ED7211-0010 ürününü şahsen teslim alabilir miyim?
Groningen, Hollanda'daki depomuzdan şahsen teslim alma mümkün olabilir — sipariş vermeden önce uygunluğu kontrol etmek ve bir teslim alma zamanı ayarlamak için bizimle iletişime geçin.
Ekspres teslimat mevcut mu?
Evet — ED7211-0010 için teklif isterken bunu belirtin, yanıtımızda ekspres gönderim seçeneklerini de sunalım.
Fabrikamız durdu ve buna acilen ihtiyacımız var — yardımcı olabilir misiniz?
Kritik bir arıza durumunda doğrudan +31 (0)50-7110348 numarasından veya sales@partnerplc.com adresinden bizimle iletişime geçin — uygunluk ve varış yerine bağlı olarak ED7211-0010 için aynı gün kurye veya özel taşıma seçeneklerini değerlendirebiliriz.
The ED7211-0010 servomotor EtherCAT Terminal offers high servo performance in a very compact design for motors in the AM8100 series up to 4.5 A (lrms). The integrated One Cable Technology (OCT) combines a motor cable and an absolute feedback system in a
Teknik özellikler
Specifications
| Number of channels | Total | 1 |
| Internal communication protocol | EtherCAT |
| Number of channels | 1 |
| Load type | ohmic, inductive |
| Inductance | min. 300 µH |
| Load supply | Input voltage | 8…48 V DC |
| Output current | Rated current | 4.5 A |
| Output current | Peak current | 9 A |
| Rated power | 276 W |
| Rotating field frequency | 0…599 Hz |
| Frequency | PWM | 16 kHz |
| Frequency | Current controller | 32 kHz |
| Frequency | Position controller | 16 kHz |
| Frequency | Speed controller | 16 kHz |
| STO | no |
| SS1 | no |
| Safe Motion | no |
| Cable length | OCT | max. 20 m |
| Chopper resistance | externally, with EL9576 |
| Function | motor holding brake |
| Sensor types | absolute feedback (OCT) |
| Resolution | Process data (position) | 32 bit |
| Electronic nameplate | yes |
| Open-circuit recognition | yes |
| Connection technology | push-in |
| Signal range | Nominal | 24 V DC |
| Specification | positive switching |
| “0” signal voltage | max. 1.8 V DC |
| “1” signal voltage | min. 3 V DC |
| Input current | typ. 1.75 mA |
| Cable length | Sensor cable | max. 30 m |
| Signal range | Technical | 20.4…28.8 V DC |
| Output current | max. 0.5 A |
| Short-circuit proof | yes |
| Short circuit current limit | typ. 2 A |
| Output stage | push |
| Breaking energy | Inductive | no |
| Distributed clocks | yes |
| Distributed clocks | Precision | 1 µs |
| Distributed clocks | Scope | 64 bit |
| Timestamp | yes |
| Timestamp | Precision | 1 µs |
| Timestamp | Resolution | 1 ns |
| Oversampling | no |
| Electronics | Supply voltage | via E-bus |
| E-bus | Current consumption | typ. 175 mA |
| Power contacts | Input voltage | 24 V DC (-15%/+20%) |
| Power contacts | Current carrying capacity | max. 10 A DC |
| Power contacts | Current consumption | load-dependent |
| Power contacts | Output voltage | corresponds to Power contacts | Input voltage |
| Electrical isolation | Channel/channel | no |
| Electrical isolation | Channel/bus | functional, 707 V DC type test |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| Relative humidity | 95%, no condensation |
| Installation position | see documentation |
| Vibration resistance | conforms to EN 60068-2-6 |
| Shock resistance | conforms to EN 60068-2-27 |
| EMC immunity | conforms to EN 61000-6-2 |
| EMC emission | conforms to EN 61000-6-4, conforms to IEC/EN 61800-3 |
| Markings | CE |
| Weight | 60 g |
| Protection rating | IP20 |
| Material | polycarbonate |
| Dimesnions | Width (single) | 15 mm |
| Dimensions | Width (lined up) | 12 mm |
| Dimensions | Height | 100 mm |
| Dimensions | Depth | 65 mm |
| Installation | Terminal/back wall | DIN rail, 35 mm (EN 60715) |
| Installation | Terminal/terminal | double slot and key connection |
| Plug-in wiring level | no |
| Connection cross-section | Solid wire | 0.08…1.5 mm² |
| Connection cross-section | Stranded wire | 0.25…1.5 mm² |
| Connection cross-section | With ferrule | 0.14…0.75 mm² |
| Connection cross-section AWG | Solid wire | AWG28…16 |
| Connection cross-section AWG | Stranded wire | AWG22…16 |
| Connection cross-section AWG | With ferrule | AWG26…19 |
| Stripping length | 8…9 mm |
| Power contact | "+" (left) | yes |
| Power contact | "+" (rechts) | yes |
| Power contact | "-" (left) | yes |
| Power contact | "-" (right) | yes |
| Power contact | "⏚" (left) | no |
| Power contact | "⏚" (right) | no |
| Insertion lock for power contact “⏚” | yes |
