IFM LI2131
Solicitar orçamento
Dados rápidos
| Disponibilidade | Confirmação sob consulta |
| Categoria | Use in applications with coolants, cleaning agents and lubricants as well as hydraulic oils |
| Garantia | 12 meses (novo) · 3 meses (usado/recondicionado) |
Envio e disponibilidade
Quando é que LI2131 pode ser enviado?
LI2131 é obtido sob encomenda — solicite um orçamento e confirmaremos a disponibilidade exata e o prazo de entrega para esta unidade específica.
Posso levantar LI2131 pessoalmente?
O levantamento no nosso armazém em Groningen, Países Baixos, pode ser possível — contacte-nos antes de encomendar para confirmar disponibilidade e combinar um horário de levantamento.
A entrega expresso está disponível?
Sim — mencione isso ao solicitar um orçamento para LI2131 e incluiremos as opções de entrega expresso na nossa resposta.
A nossa fábrica está parada e precisamos disto com urgência — podem ajudar?
Em caso de avaria crítica, contacte-nos diretamente através do +31 (0)50-7110348 ou sales@partnerplc.com — estudaremos um estafeta no mesmo dia ou transporte dedicado para LI2131, consoante a disponibilidade e o destino.
For the reliable point level monitoring in tanks and containers Detection of minimum level, leakage or overflow of tanks Easy empty and full adjustment by pressing just one pushbutton Suitable for water, oils and coolants With approval according to the German Federal Water Act (WHG) Integrated temperature measurement via IO-Link
Especificações
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2 |
| Factory setting | oils; oil-based media |
| Probe length L[mm] [mm] | 132 |
Application
| Special feature | Gold-plated contacts |
| Media | Liquids |
| Dielectric constant of the medium | > 1,8 |
| Recommended media | water; hydrous media; oils; oil-based media |
| Cannot be used for | See operating instructions, chapter "Intended use". |
| Medium temperature[°C] [°C] | -25...85; (applications subject to the German Federal Water Act 0...85°C) |
| Pressure rating | 0.5 bar; 0.05 MPa |
| 0.5 bar | 0.05 MPa |
| Vacuum resistance[mbar] [mbar] | -500 |
Electrical data
| Operating voltage[V] [V] | 9.6...35 DC; (IO-Link: 18...30 DC) |
| Current consumption[mA] [mA] | < 15 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | < 1 |
| Measuring principle | capacitive |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2 |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; IO-Link |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | OUT-OP; normally closed; OUT2; normally open / normally closed; (parameterisable) |
| OUT-OP | normally closed |
| OUT2 | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2.5 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Factory setting | oils; oil-based media |
| Probe length L[mm] [mm] | 132 |
| Active range A[mm] [mm] | 28 |
| Measuring range[°C] [°C] | -25...85 |
Accuracy / deviations
| Accuracy[K] [K] | 1,5 |
| Resolution[K] [K] | 0.1 |
| Dynamic response T09[s] [s] | 240 |
Response times
| Response time[s] [s] | < 0.3 |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Common - I&D; Identification and Diagnosis |
| Common - I&D | Identification and Diagnosis |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 5 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 4.5 |
| Supported DeviceIDs | default; 1588 |
| default | 1588 |
Operating conditions
| Ambient temperature[°C] [°C] | -25...85 |
| Storage temperature[°C] [°C] | -25...85 |
| Protection | IP 68; IP 69K; (7 days / 3 m water depth / 0.3 bar: IP 68) |
Tests / approvals
| Approval | WHG; General building authority approval; overflow prevention; leakage detection |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3; in a closed metal tank; DIN EN 61000-6-4; in plastic or open metal tanks |
| DIN EN 61000-6-3 | in a closed metal tank |
| DIN EN 61000-6-4 | in plastic or open metal tanks |
| Shock resistance | DIN EN 60068-2-27; 12 g (11 ms) |
| DIN EN 60068-2-27 | 12 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6; 5 g (10...2000 Hz) |
| DIN EN 60068-2-6 | 5 g (10...2000 Hz) |
| MTTF[years] [years] | 433 |
| UL approval | UL approval no.; H013; File number UL; E174191 |
| UL approval no. | H013 |
| File number UL | E174191 |
Mechanical data
| Weight[g] [g] | 240 |
| Materials | PP reinforced fibre |
| Materials (wetted parts) | PP |
| Probe diameter[mm] [mm] | 16 |
Displays / operating elements
| Display | operation; LED, green; switching status; LED, yellow |
| operation | LED, green |
| switching status | LED, yellow |
| Operating elements | inductive programming button |
Remarks
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
