Disponible bajo consulta
IFM LI2131
Referencia: LI2131 · Marca: IFM
Precio bajo consulta
Solicitar presupuesto
Garantía de 12 meses (nuevo) · 3 meses (usado/reacondicionado)
Devoluciones en 30 días, sin comisión de reposición en piezas sin usar
Envío mediante
Datos rápidos
| Disponibilidad | Confirmación bajo consulta |
| Categoría | Use in applications with coolants, cleaning agents and lubricants as well as hydraulic oils |
| Garantía | 12 meses (nuevo) · 3 meses (usado/reacondicionado) |
Envío y disponibilidad
¿Cuándo se puede enviar LI2131?
LI2131 se abastece bajo pedido — solicite un presupuesto y confirmaremos la disponibilidad exacta y el plazo de entrega para esta unidad concreta.
¿Puedo recoger LI2131 en persona?
Es posible recoger el pedido en nuestro almacén de Groningen, Países Bajos — contáctenos antes de realizar el pedido para confirmar disponibilidad y acordar un horario de recogida.
¿Está disponible el envío exprés?
Sí — menciónelo al solicitar un presupuesto para LI2131 e incluiremos las opciones de envío exprés en nuestra respuesta.
Nuestra planta está parada y lo necesitamos urgentemente — ¿pueden ayudar?
Ante una avería crítica, contáctenos directamente al +31 (0)50-7110348 o a sales@partnerplc.com — estudiaremos un envío urgente el mismo día o un transporte dedicado para LI2131, según disponibilidad y destino.
For the reliable point level monitoring in tanks and containers Detection of minimum level, leakage or overflow of tanks Easy empty and full adjustment by pressing just one pushbutton Suitable for water, oils and coolants With approval according to the German Federal Water Act (WHG) Integrated temperature measurement via IO-Link
Especificaciones
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2 |
| Factory setting | oils; oil-based media |
| Probe length L[mm] [mm] | 132 |
Application
| Special feature | Gold-plated contacts |
| Media | Liquids |
| Dielectric constant of the medium | > 1,8 |
| Recommended media | water; hydrous media; oils; oil-based media |
| Cannot be used for | See operating instructions, chapter "Intended use". |
| Medium temperature[°C] [°C] | -25...85; (applications subject to the German Federal Water Act 0...85°C) |
| Pressure rating | 0.5 bar; 0.05 MPa |
| 0.5 bar | 0.05 MPa |
| Vacuum resistance[mbar] [mbar] | -500 |
Electrical data
| Operating voltage[V] [V] | 9.6...35 DC; (IO-Link: 18...30 DC) |
| Current consumption[mA] [mA] | < 15 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | < 1 |
| Measuring principle | capacitive |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2 |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; IO-Link |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | OUT-OP; normally closed; OUT2; normally open / normally closed; (parameterisable) |
| OUT-OP | normally closed |
| OUT2 | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2.5 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Factory setting | oils; oil-based media |
| Probe length L[mm] [mm] | 132 |
| Active range A[mm] [mm] | 28 |
| Measuring range[°C] [°C] | -25...85 |
Accuracy / deviations
| Accuracy[K] [K] | 1,5 |
| Resolution[K] [K] | 0.1 |
| Dynamic response T09[s] [s] | 240 |
Response times
| Response time[s] [s] | < 0.3 |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Common - I&D; Identification and Diagnosis |
| Common - I&D | Identification and Diagnosis |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 5 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 4.5 |
| Supported DeviceIDs | default; 1588 |
| default | 1588 |
Operating conditions
| Ambient temperature[°C] [°C] | -25...85 |
| Storage temperature[°C] [°C] | -25...85 |
| Protection | IP 68; IP 69K; (7 days / 3 m water depth / 0.3 bar: IP 68) |
Tests / approvals
| Approval | WHG; General building authority approval; overflow prevention; leakage detection |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3; in a closed metal tank; DIN EN 61000-6-4; in plastic or open metal tanks |
| DIN EN 61000-6-3 | in a closed metal tank |
| DIN EN 61000-6-4 | in plastic or open metal tanks |
| Shock resistance | DIN EN 60068-2-27; 12 g (11 ms) |
| DIN EN 60068-2-27 | 12 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6; 5 g (10...2000 Hz) |
| DIN EN 60068-2-6 | 5 g (10...2000 Hz) |
| MTTF[years] [years] | 433 |
| UL approval | UL approval no.; H013; File number UL; E174191 |
| UL approval no. | H013 |
| File number UL | E174191 |
Mechanical data
| Weight[g] [g] | 240 |
| Materials | PP reinforced fibre |
| Materials (wetted parts) | PP |
| Probe diameter[mm] [mm] | 16 |
Displays / operating elements
| Display | operation; LED, green; switching status; LED, yellow |
| operation | LED, green |
| switching status | LED, yellow |
| Operating elements | inductive programming button |
Remarks
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
Garantía de 12 mesesen todos los artículos nuevos
Garantía de 3 mesesen piezas usadas y reacondicionadas
Devoluciones en 30 díassin comisión de reposición en piezas sin usar
Envío mundialEntrega rápida y con seguimiento en todo el mundo
