IFM SA3010
Poproś o wycenę
Najważniejsze informacje
| Dostępność | Potwierdzenie na zapytanie |
| Gwarancja | 12 miesięcy (nowe) · 3 miesiące (używane/odnowione) |
Wysyłka i dostępność
Kiedy SA3010 może zostać wysłany?
SA3010 jest sprowadzany na zamówienie — poproś o wycenę, a potwierdzimy dokładną dostępność i czas realizacji dla tej konkretnej sztuki.
Czy mogę odebrać SA3010 osobiście?
Odbiór osobisty w naszym magazynie w Groningen w Holandii może być możliwy — skontaktuj się z nami przed złożeniem zamówienia, aby potwierdzić dostępność i ustalić termin odbioru.
Czy dostępna jest dostawa ekspresowa?
Tak — wspomnij o tym w zapytaniu ofertowym dotyczącym SA3010, a w odpowiedzi podamy opcje dostawy ekspresowej.
Nasz zakład stoi i pilnie tego potrzebujemy — czy możecie pomóc?
W przypadku krytycznej awarii skontaktuj się z nami bezpośrednio pod numerem +31 (0)50-7110348 lub e-mailem sales@partnerplc.com — sprawdzimy możliwość kuriera tego samego dnia lub dedykowanego transportu dla SA3010, w zależności od dostępności i miejsca docelowego.
Reliable monitoring of water in pipes Two switching outputs, one of them programmable as analogue output Easy setting of the switch points for quick set-up Robust housing for use in harsh industrial environments LED display for indication of the measured value
Specyfikacja
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Measuring range[l/min] [l/min] | 0...10 |
| Process connection | threaded connection M26 x 1,5 internal thread |
Application
| Special feature | Gold-plated contacts |
| Installation | T-pieces; ((DIN 2353): QL 18-18-18 (NW 15 mm) / QL 22-18-22 (NW 19 mm) / QL 28-18-28 (NW 24 mm)) |
| Media | water |
| Medium temperature[°C] [°C] | 0...80 |
| Pressure rating | 30 bar; 3 MPa |
| 30 bar | 3 MPa |
Electrical data
| Operating voltage[V] [V] | 20...28 DC |
| Current consumption[mA] [mA] | < 80 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | 10 |
| Measuring principle | calorimetric |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 250; (per output) |
| Number of analogue outputs | 1 |
| Analogue current output[mA] [mA] | 4...20; (scalable) |
| Max. load[Ω] [Ω] | 500 |
| Analogue voltage output[V] [V] | 0...10; (scalable) |
| Min. load resistance[Ω] [Ω] | 2000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Measuring range[l/min] [l/min] | 0...10 |
| Display range[l/min] [l/min] | 0...12 |
| Set point SP[l/min] [l/min] | 0.1...12 |
| Reset point rP[l/min] [l/min] | 0...11.9 |
| Analogue start point ASP[l/min] [l/min] | 0...8 |
| Analogue end point AEP[l/min] [l/min] | 4...12 |
| In steps of[l/min] [l/min] | 0.1 |
Accuracy / deviations
| Repeatability[% of the measured value] [% of the measured value] | 3 (Q < 30%) / 7 (Q < 100%) |
| Temperature gradient[K/min] [K/min] | 200 |
| Accuracy (in the measuring range) | ± 10 |
Response times
| Response time[s] [s] | 5; (10%...90%) |
| Delay time programmable dS, dr[s] [s] | 0...50 |
Software / programming
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; current/voltage output; inside pipe diameter; start-up delay; adaptation of displayed values; display can be rotated and switched off; Display unit |
Operating conditions
| Ambient temperature[°C] [°C] | -20...60 |
| Protection | IP 67 |
Tests / approvals
| EMC | EN 61000-4-2 ESD; 4 kV CD / 8 kV AD; EN 61000-4-3 HF radiated; 10 V/m; EN 61000-4-4 Burst; 2 kV; EN 61000-4-6 HF conducted; 10 V |
| EN 61000-4-2 ESD | 4 kV CD / 8 kV AD |
| EN 61000-4-3 HF radiated | 10 V/m |
| EN 61000-4-4 Burst | 2 kV |
| EN 61000-4-6 HF conducted | 10 V |
| MTTF[years] [years] | 184 |
Mechanical data
| Weight[g] [g] | 330.5 |
| Housing | cylindrical |
| Dimensions[mm] [mm] | Ø 34 / L = 102 |
| Materials | stainless steel (316L/1.4404); PBT; PC; PA; EPDM/X; FKM |
| Materials (wetted parts) | stainless steel (316L/1.4404); O-ring: FKM 70 Shore A |
| Process connection | threaded connection M26 x 1,5 internal thread |
| Probe diameter[mm] [mm] | 14 |
Displays / operating elements
| Display | switching status; 2 x LED, red; measured values; 7-segment LED display; programming; 7-segment LED display |
| switching status | 2 x LED, red |
| measured values | 7-segment LED display |
| programming | 7-segment LED display |
| Display unit | l/min; gpm; l/h; gph; m³/h |
Remarks
| Remarks | NW = nominal diameter |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |



