Disponibile su richiesta
IFM R1D204
Codice: R1D204 · Marchio: IFM
Prezzo su richiesta
Richiedi un preventivo
Garanzia di 12 mesi (nuovo) · 3 mesi (usato/rigenerato)
Reso entro 30 giorni, nessuna commissione di riassortimento sui pezzi non utilizzati
Spedito tramite
In breve
| Disponibilità | Conferma su richiesta |
| Categoria | Radar distance sensors |
| Garanzia | 12 mesi (nuovo) · 3 mesi (usato/rigenerato) |
Spedizione e disponibilità
Quando può essere spedito R1D204?
R1D204 viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.
Posso ritirare R1D204 di persona?
Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.
È disponibile la consegna espressa?
Sì — menzionalo nella richiesta di preventivo per R1D204 e includeremo le opzioni di spedizione espressa nella nostra risposta.
Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?
In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per R1D204, in base a disponibilità e destinazione.
Long ranges and a wide temperature range Reliable measurements even in precipitation, fog, dust and dirt Simultaneous detection of distance and speed Operating modes can be set in accordance with the specific application Intuitive set-up and visualisation of the measured data using the ifm Vision Assistant software
Specifiche
Product characteristics
| Communication interface | IO-Link |
| Housing | rectangular |
| Dimensions[mm] [mm] | 80 x 80 x 45 |
| Electrical design | PNP/NPN; (parameterisable) |
| Output function | normally open / normally closed; (parameterisable) |
Application
| Radio approval for | Argentina; India |
Electrical data
| Operating voltage[V] [V] | 10...30 DC; (to SELV/PELV ; energy-limited circuits according to IEC/UL 61010-1 3rd ed. cl. 9.4) |
| Current consumption[mA] [mA] | < 300; (mean value: 150 mA) |
| Power consumption[W] [W] | 21; (maximum) |
| Protection class | III |
| Reverse polarity protection | yes |
| Max. power-on delay time[ms] [ms] | 1000 |
| Operating frequency [GHz] | 76...77 |
| Mean radiated power EIRP [dBm] | 24 |
Inputs / outputs
| Total number of inputs and outputs | 3 |
Inputs
| Inputs | IN1; activation/deactivation of the radar |
| IN1 | activation/deactivation of the radar |
Outputs
| Total number of outputs | 2 |
| Output signal | OUT1; switching signal; IO-Link; OUT2; switching signal; analogue signal |
| OUT1 | switching signal; IO-Link |
| OUT2 | switching signal; analogue signal |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
| Analogue current output[mA] [mA] | 4...20, invertible; (scalable) |
| Max. load[Ω] [Ω] | 500; (< 250 Ω: Ub 16...30 V DC; 250...500 Ω: Ub 18...30 V DC) |
| Analogue voltage output[V] [V] | 0...10, invertible; (scalable) |
| Min. load[Ω] [Ω] | 2000 |
| Electrical design | PNP/NPN; (parameterisable) |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2.5 |
| Permanent current rating of switching output DC[mA] [mA] | 200 |
Detection zone
| Range[m] [m] | 0.35...50; (referred to E23013) |
| Angle of aperture cylindrical[°] [°] | horizontal; 40; vertical; 20 |
| horizontal | 40 |
| vertical | 20 |
Measuring/setting range
| Measuring range[m] [m] | 0.35...50; (see diagram:) |
| Sampling rate[Hz] [Hz] | 20...100 |
Accuracy / deviations
| Hysteresis[mm] [mm] | 5; (parameterisable) |
| Temperature coefficient analogue output[% of the span / 10 K] [% of the span / 10 K] | ± 0,1 |
| Repeatability analogue output [% of the span] | < 0,1 |
| Linearity error of analogue output [% of the span] | ± 0,15 |
| Precision analogue output [% of the span] | ± 0,2 (in addition to the accuracy specifications in the further data section) |
Software / programming
| Parameter setting options | only via IO-Link |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM3 (230,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | BLOB; Binary Large Object transfer; Common - I&D; Identification and Diagnosis; Function; Locator; Function; ProductURI |
| BLOB | Binary Large Object transfer |
| Common - I&D | Identification and Diagnosis |
| Function | ProductURI |
| SIO mode | yes |
| Required master port type | A |
| Min. process cycle time[ms] [ms] | 3.2 |
| IO-Link process data (cyclical) | distance; 32; speed; 32; Power; 8; RCS; 8; sensor inclination; 1; device status; 4; binary switching information; 4 |
| distance | 32 |
| speed | 32 |
| Power | 8 |
| RCS | 8 |
| sensor inclination | 1 |
| device status | 4 |
| binary switching information | 4 |
| IO-Link functions (acyclical) | application specific tag; operating hours counter; number of trigger events; internal temperature; ROI setting |
| Supported DeviceIDs | default; 1518 |
| default | 1518 |
Operating conditions
| Ambient temperature[°C] [°C] | -40...80 |
| Note on ambient temperature | without using the analogue output: -40...85 °C |
| Storage temperature[°C] [°C] | -40...85 |
| Protection | IP 65; IP 66; IP 67; IP 69K; (with mounted connectors or protective caps) |
Tests / approvals
| EMC | DIN EN 61000-4-2 ESD; 4 kV CD / 8 kV AD; DIN EN 61000-4-3 HF radiated; 10 V/m; DIN EN 61000-4-4 Burst; 2 kV; DIN EN 61000-4-6 HF conducted; 10 V; DIN EN 61000-6-2; immunity / industrial environments; EN 55032 emission; Class A |
| DIN EN 61000-4-2 ESD | 4 kV CD / 8 kV AD |
| DIN EN 61000-4-3 HF radiated | 10 V/m |
| DIN EN 61000-4-4 Burst | 2 kV |
| DIN EN 61000-4-6 HF conducted | 10 V |
| DIN EN 61000-6-2 | immunity / industrial environments |
| EN 55032 emission | Class A |
| Impact resistance | IEC 62262; IK06 (1J) |
| IEC 62262 | IK06 (1J) |
| Vibration resistance | DIN EN 60068-2-6 Fc; 10 g 10 frequency cycles, 1 octave/minute, in 3 axes |
| DIN EN 60068-2-6 Fc | 10 g 10 frequency cycles, 1 octave/minute, in 3 axes |
| Shock resistance | DIN EN 60068-2-27 Ea; 50 g 11 ms half-sine; 10 shocks each in every direction along the 3 coordinate axes |
| DIN EN 60068-2-27 Ea | 50 g 11 ms half-sine; 10 shocks each in every direction along the 3 coordinate axes |
| Continuous shock resistance | DIN EN 60068-2-29 Eb; 40 g 6 ms half-sine; 4,000 shocks each in every direction along the 3 coordinate axes |
| DIN EN 60068-2-29 Eb | 40 g 6 ms half-sine; 4,000 shocks each in every direction along the 3 coordinate axes |
| Fast temperature change | DIN EN 60068-2-14 Na; TA = -40°C; TB = 85°C; t1 = 30 min; t2 = < 30 s; 300 cycles |
| DIN EN 60068-2-14 Na | TA = -40°C; TB = 85°C; t1 = 30 min; t2 = < 30 s; 300 cycles |
| Salt spray test | DIN EN 60068-2-11 Ka; 8 test cycles |
| DIN EN 60068-2-11 Ka | 8 test cycles |
| Electrical safety | DIN EN 61010-2-201; electric shock / electrical supply only via SELV/PELV circuits |
| DIN EN 61010-2-201 | electric shock / electrical supply only via SELV/PELV circuits |
| MTTF[years] [years] | 54 |
Mechanical data
| Weight[g] [g] | 414.55 |
| Housing | rectangular |
| Mounting | flush mountable |
| Dimensions[mm] [mm] | 80 x 80 x 45 |
| Materials | housing: PA; radome: PEI; Sealing: HNBR |
Displays / operating elements
| Display | switching status; 2x LED, yellow; operation; 1x LED, green; errors; 1x LED, red |
| switching status | 2x LED, yellow |
| operation | 1x LED, green |
| errors | 1x LED, red |
Remarks
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A |
Garanzia di 12 mesisu tutti i prodotti nuovi
Garanzia di 3 mesisu pezzi usati e rigenerati
Reso entro 30 giorninessuna commissione di riassortimento sui pezzi non utilizzati
Spedizione globaleConsegna rapida e tracciata in tutto il mondo
