Disponible bajo consulta
IFM R1D204
Referencia: R1D204 · Marca: IFM
Precio bajo consulta
Solicitar presupuesto
Garantía de 12 meses (nuevo) · 3 meses (usado/reacondicionado)
Devoluciones en 30 días, sin comisión de reposición en piezas sin usar
Envío mediante
Datos rápidos
| Disponibilidad | Confirmación bajo consulta |
| Categoría | Radar distance sensors |
| Garantía | 12 meses (nuevo) · 3 meses (usado/reacondicionado) |
Envío y disponibilidad
¿Cuándo se puede enviar R1D204?
R1D204 se abastece bajo pedido — solicite un presupuesto y confirmaremos la disponibilidad exacta y el plazo de entrega para esta unidad concreta.
¿Puedo recoger R1D204 en persona?
Es posible recoger el pedido en nuestro almacén de Groningen, Países Bajos — contáctenos antes de realizar el pedido para confirmar disponibilidad y acordar un horario de recogida.
¿Está disponible el envío exprés?
Sí — menciónelo al solicitar un presupuesto para R1D204 e incluiremos las opciones de envío exprés en nuestra respuesta.
Nuestra planta está parada y lo necesitamos urgentemente — ¿pueden ayudar?
Ante una avería crítica, contáctenos directamente al +31 (0)50-7110348 o a sales@partnerplc.com — estudiaremos un envío urgente el mismo día o un transporte dedicado para R1D204, según disponibilidad y destino.
Long ranges and a wide temperature range Reliable measurements even in precipitation, fog, dust and dirt Simultaneous detection of distance and speed Operating modes can be set in accordance with the specific application Intuitive set-up and visualisation of the measured data using the ifm Vision Assistant software
Especificaciones
Product characteristics
| Communication interface | IO-Link |
| Housing | rectangular |
| Dimensions[mm] [mm] | 80 x 80 x 45 |
| Electrical design | PNP/NPN; (parameterisable) |
| Output function | normally open / normally closed; (parameterisable) |
Application
| Radio approval for | Argentina; India |
Electrical data
| Operating voltage[V] [V] | 10...30 DC; (to SELV/PELV ; energy-limited circuits according to IEC/UL 61010-1 3rd ed. cl. 9.4) |
| Current consumption[mA] [mA] | < 300; (mean value: 150 mA) |
| Power consumption[W] [W] | 21; (maximum) |
| Protection class | III |
| Reverse polarity protection | yes |
| Max. power-on delay time[ms] [ms] | 1000 |
| Operating frequency [GHz] | 76...77 |
| Mean radiated power EIRP [dBm] | 24 |
Inputs / outputs
| Total number of inputs and outputs | 3 |
Inputs
| Inputs | IN1; activation/deactivation of the radar |
| IN1 | activation/deactivation of the radar |
Outputs
| Total number of outputs | 2 |
| Output signal | OUT1; switching signal; IO-Link; OUT2; switching signal; analogue signal |
| OUT1 | switching signal; IO-Link |
| OUT2 | switching signal; analogue signal |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
| Analogue current output[mA] [mA] | 4...20, invertible; (scalable) |
| Max. load[Ω] [Ω] | 500; (< 250 Ω: Ub 16...30 V DC; 250...500 Ω: Ub 18...30 V DC) |
| Analogue voltage output[V] [V] | 0...10, invertible; (scalable) |
| Min. load[Ω] [Ω] | 2000 |
| Electrical design | PNP/NPN; (parameterisable) |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2.5 |
| Permanent current rating of switching output DC[mA] [mA] | 200 |
Detection zone
| Range[m] [m] | 0.35...50; (referred to E23013) |
| Angle of aperture cylindrical[°] [°] | horizontal; 40; vertical; 20 |
| horizontal | 40 |
| vertical | 20 |
Measuring/setting range
| Measuring range[m] [m] | 0.35...50; (see diagram:) |
| Sampling rate[Hz] [Hz] | 20...100 |
Accuracy / deviations
| Hysteresis[mm] [mm] | 5; (parameterisable) |
| Temperature coefficient analogue output[% of the span / 10 K] [% of the span / 10 K] | ± 0,1 |
| Repeatability analogue output [% of the span] | < 0,1 |
| Linearity error of analogue output [% of the span] | ± 0,15 |
| Precision analogue output [% of the span] | ± 0,2 (in addition to the accuracy specifications in the further data section) |
Software / programming
| Parameter setting options | only via IO-Link |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM3 (230,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | BLOB; Binary Large Object transfer; Common - I&D; Identification and Diagnosis; Function; Locator; Function; ProductURI |
| BLOB | Binary Large Object transfer |
| Common - I&D | Identification and Diagnosis |
| Function | ProductURI |
| SIO mode | yes |
| Required master port type | A |
| Min. process cycle time[ms] [ms] | 3.2 |
| IO-Link process data (cyclical) | distance; 32; speed; 32; Power; 8; RCS; 8; sensor inclination; 1; device status; 4; binary switching information; 4 |
| distance | 32 |
| speed | 32 |
| Power | 8 |
| RCS | 8 |
| sensor inclination | 1 |
| device status | 4 |
| binary switching information | 4 |
| IO-Link functions (acyclical) | application specific tag; operating hours counter; number of trigger events; internal temperature; ROI setting |
| Supported DeviceIDs | default; 1518 |
| default | 1518 |
Operating conditions
| Ambient temperature[°C] [°C] | -40...80 |
| Note on ambient temperature | without using the analogue output: -40...85 °C |
| Storage temperature[°C] [°C] | -40...85 |
| Protection | IP 65; IP 66; IP 67; IP 69K; (with mounted connectors or protective caps) |
Tests / approvals
| EMC | DIN EN 61000-4-2 ESD; 4 kV CD / 8 kV AD; DIN EN 61000-4-3 HF radiated; 10 V/m; DIN EN 61000-4-4 Burst; 2 kV; DIN EN 61000-4-6 HF conducted; 10 V; DIN EN 61000-6-2; immunity / industrial environments; EN 55032 emission; Class A |
| DIN EN 61000-4-2 ESD | 4 kV CD / 8 kV AD |
| DIN EN 61000-4-3 HF radiated | 10 V/m |
| DIN EN 61000-4-4 Burst | 2 kV |
| DIN EN 61000-4-6 HF conducted | 10 V |
| DIN EN 61000-6-2 | immunity / industrial environments |
| EN 55032 emission | Class A |
| Impact resistance | IEC 62262; IK06 (1J) |
| IEC 62262 | IK06 (1J) |
| Vibration resistance | DIN EN 60068-2-6 Fc; 10 g 10 frequency cycles, 1 octave/minute, in 3 axes |
| DIN EN 60068-2-6 Fc | 10 g 10 frequency cycles, 1 octave/minute, in 3 axes |
| Shock resistance | DIN EN 60068-2-27 Ea; 50 g 11 ms half-sine; 10 shocks each in every direction along the 3 coordinate axes |
| DIN EN 60068-2-27 Ea | 50 g 11 ms half-sine; 10 shocks each in every direction along the 3 coordinate axes |
| Continuous shock resistance | DIN EN 60068-2-29 Eb; 40 g 6 ms half-sine; 4,000 shocks each in every direction along the 3 coordinate axes |
| DIN EN 60068-2-29 Eb | 40 g 6 ms half-sine; 4,000 shocks each in every direction along the 3 coordinate axes |
| Fast temperature change | DIN EN 60068-2-14 Na; TA = -40°C; TB = 85°C; t1 = 30 min; t2 = < 30 s; 300 cycles |
| DIN EN 60068-2-14 Na | TA = -40°C; TB = 85°C; t1 = 30 min; t2 = < 30 s; 300 cycles |
| Salt spray test | DIN EN 60068-2-11 Ka; 8 test cycles |
| DIN EN 60068-2-11 Ka | 8 test cycles |
| Electrical safety | DIN EN 61010-2-201; electric shock / electrical supply only via SELV/PELV circuits |
| DIN EN 61010-2-201 | electric shock / electrical supply only via SELV/PELV circuits |
| MTTF[years] [years] | 54 |
Mechanical data
| Weight[g] [g] | 414.55 |
| Housing | rectangular |
| Mounting | flush mountable |
| Dimensions[mm] [mm] | 80 x 80 x 45 |
| Materials | housing: PA; radome: PEI; Sealing: HNBR |
Displays / operating elements
| Display | switching status; 2x LED, yellow; operation; 1x LED, green; errors; 1x LED, red |
| switching status | 2x LED, yellow |
| operation | 1x LED, green |
| errors | 1x LED, red |
Remarks
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A |
Garantía de 12 mesesen todos los artículos nuevos
Garantía de 3 mesesen piezas usadas y reacondicionadas
Devoluciones en 30 díassin comisión de reposición en piezas sin usar
Envío mundialEntrega rápida y con seguimiento en todo el mundo
