IFM AC246A
Richiedi un preventivo
In breve
| Disponibilità | Conferma su richiesta |
| Categoria | All AS-interface I/O modules |
| Garanzia | 12 mesi (nuovo) · 3 mesi (usato/rigenerato) |
Spedizione e disponibilità
Quando può essere spedito AC246A?
AC246A viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.
Posso ritirare AC246A di persona?
Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.
È disponibile la consegna espressa?
Sì — menzionalo nella richiesta di preventivo per AC246A e includeremo le opzioni di spedizione espressa nella nostra risposta.
Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?
In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per AC246A, in base a disponibilità e destinazione.
For the decentralised triggering of cylinders and valve actuators Combination of AS-i I/O module and solenoid valve High energy efficiency due to decentralised application near the actuator Reduced installation and wiring complexity Easy toolless installation and wiring thanks to quick mounting technology
Specifiche
Application
| Design | housing for DIN rail mounting |
| Application | AS-i ATEX module |
Electrical data
| Operating voltage[V] [V] | 26.5...31.6 DC |
| Max. current consumption from AS-i[mA] [mA] | 300 |
| Integrated watchdog | yes |
Inputs / outputs
| Number of inputs and outputs | Number of digital inputs: 2; Number of pneumatic outputs: 1 |
Inputs
| Number of digital inputs | 2 |
| Input circuit of digital inputs | PNP |
| Sensor supply of the inputs | AS-i |
| Power supply[V] [V] | 20...30; (via flat cable) |
| Max. total current rating of inputs[mA] [mA] | 200 |
| Input current High[mA] [mA] | 6...10 |
| Input current Low[mA] [mA] | 0...2 |
| Switching level high[V] [V] | > 11 |
| Digital inputs protected against short circuits | yes |
Outputs
| Electrical design | AS-i |
| Number of pneumatic outputs | 1 |
Operating conditions
| Ambient temperature[°C] [°C] | -10...50 |
| Protection | IP 50 |
Tests / approvals
| ATEX marking | II 3D Ex tc IIIB T80°C Dc X IP50 |
| EMC | EN 50295 |
| MTTF[years] [years] | 351 |
AS-i classification
| AS-i version | 2.11; 3.0 |
| AS-i addressing | addressing socket |
| Extended addressing mode | no |
| AS-i master profile | M2; M3; M4 |
| AS-i profile | S-3.F.F |
| AS-i I/O configuration[hex] [hex] | 3 |
| AS-i ID code[hex] [hex] | F.F |
| AS-i certificate pending | yes |
| Assignment of the data bits | data bit; D0; D1; D2; D3; input; 1; 2; 3; 4; socket; I-1/2; I-1/2 I-2; -; -; pin; 4; 2 4; -; -; pneumatic output; -; -; 4; - |
| data bit | D0 |
| input | 1 |
| socket | I-1/2 |
| pin | 4 |
| pneumatic output | - |
Mechanical data
| Weight[g] [g] | 403 |
| Housing | rectangular |
| Type of mounting | quick mounting; mounting on DIN rail; (TH35 (EN 60715)) |
| Dimensions[mm] [mm] | 108 x 85 x 50 |
| Materials | PA; POM; piercing contacts: CuSn6 nickel-plated and tin-plated |
| Pneumatic system | 1 x 5/2-way slide valve (free from overlapping) |
| Operating pressure range | 3...8 bar; 0.3...0.8 MPa |
| 3...8 bar | 0.3...0.8 MPa |
| Air flow at 6/5 bar[l/min] [l/min] | 500 |
| Permissible compressed air | non-lubricated compressed air class 6-3-1; lubricated compressed air class 6-3-4 |
| Manual override | pressing/releasing or pressing/turning/locking |
| Tube fittings | 8 mm |
| Exhaust | exhaust can be discharged through tube connection |
Displays / operating elements
| Display | operation; LED, green; errors; LED, red; function; LED, yellow |
| operation | LED, green |
| errors | LED, red |
| function | LED, yellow |
Electrical connection
| Module connection | Flat cables |
Accessories
| Items supplied | lower part |
| Accessories (optional) | Mounting plate:, E74999; Module lower part:, E75000; Protective cap: M12, E73004; sealing plugs:, E75231; Impact protection housing:, E7000A; silencer:, E75232; Push-in L-fitting:, E75228; Push-in T-fitting:, E75227 |
Remarks
| Remarks | Mechanical protection has to be implemented.; Otherwise the unit must be installed together with the impact protection housing (E7000A).; If not pneumatically operated, E75231 sealing plug must be inserted.; Avoid ingress of dirt and dust.; Do not connect any of the following points to an external potential:; L-, L+, I-1/2, I-2; The connections are electrically connected with the AS-i cable.; Please see the notes on compressed air and EMC/ESD under "Downloads" |
| Pack quantity | 1 pcs. |
Electrical connection
| quick mounting technology for AS-i flat cable | ; three orientations possible |
