IFM AC246A
Demander un devis
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | All AS-interface I/O modules |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand AC246A peut-il être expédié ?
AC246A est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer AC246A en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour AC246A et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour AC246A, selon la disponibilité et la destination.
For the decentralised triggering of cylinders and valve actuators Combination of AS-i I/O module and solenoid valve High energy efficiency due to decentralised application near the actuator Reduced installation and wiring complexity Easy toolless installation and wiring thanks to quick mounting technology
Caractéristiques
Application
| Design | housing for DIN rail mounting |
| Application | AS-i ATEX module |
Electrical data
| Operating voltage[V] [V] | 26.5...31.6 DC |
| Max. current consumption from AS-i[mA] [mA] | 300 |
| Integrated watchdog | yes |
Inputs / outputs
| Number of inputs and outputs | Number of digital inputs: 2; Number of pneumatic outputs: 1 |
Inputs
| Number of digital inputs | 2 |
| Input circuit of digital inputs | PNP |
| Sensor supply of the inputs | AS-i |
| Power supply[V] [V] | 20...30; (via flat cable) |
| Max. total current rating of inputs[mA] [mA] | 200 |
| Input current High[mA] [mA] | 6...10 |
| Input current Low[mA] [mA] | 0...2 |
| Switching level high[V] [V] | > 11 |
| Digital inputs protected against short circuits | yes |
Outputs
| Electrical design | AS-i |
| Number of pneumatic outputs | 1 |
Operating conditions
| Ambient temperature[°C] [°C] | -10...50 |
| Protection | IP 50 |
Tests / approvals
| ATEX marking | II 3D Ex tc IIIB T80°C Dc X IP50 |
| EMC | EN 50295 |
| MTTF[years] [years] | 351 |
AS-i classification
| AS-i version | 2.11; 3.0 |
| AS-i addressing | addressing socket |
| Extended addressing mode | no |
| AS-i master profile | M2; M3; M4 |
| AS-i profile | S-3.F.F |
| AS-i I/O configuration[hex] [hex] | 3 |
| AS-i ID code[hex] [hex] | F.F |
| AS-i certificate pending | yes |
| Assignment of the data bits | data bit; D0; D1; D2; D3; input; 1; 2; 3; 4; socket; I-1/2; I-1/2 I-2; -; -; pin; 4; 2 4; -; -; pneumatic output; -; -; 4; - |
| data bit | D0 |
| input | 1 |
| socket | I-1/2 |
| pin | 4 |
| pneumatic output | - |
Mechanical data
| Weight[g] [g] | 403 |
| Housing | rectangular |
| Type of mounting | quick mounting; mounting on DIN rail; (TH35 (EN 60715)) |
| Dimensions[mm] [mm] | 108 x 85 x 50 |
| Materials | PA; POM; piercing contacts: CuSn6 nickel-plated and tin-plated |
| Pneumatic system | 1 x 5/2-way slide valve (free from overlapping) |
| Operating pressure range | 3...8 bar; 0.3...0.8 MPa |
| 3...8 bar | 0.3...0.8 MPa |
| Air flow at 6/5 bar[l/min] [l/min] | 500 |
| Permissible compressed air | non-lubricated compressed air class 6-3-1; lubricated compressed air class 6-3-4 |
| Manual override | pressing/releasing or pressing/turning/locking |
| Tube fittings | 8 mm |
| Exhaust | exhaust can be discharged through tube connection |
Displays / operating elements
| Display | operation; LED, green; errors; LED, red; function; LED, yellow |
| operation | LED, green |
| errors | LED, red |
| function | LED, yellow |
Electrical connection
| Module connection | Flat cables |
Accessories
| Items supplied | lower part |
| Accessories (optional) | Mounting plate:, E74999; Module lower part:, E75000; Protective cap: M12, E73004; sealing plugs:, E75231; Impact protection housing:, E7000A; silencer:, E75232; Push-in L-fitting:, E75228; Push-in T-fitting:, E75227 |
Remarks
| Remarks | Mechanical protection has to be implemented.; Otherwise the unit must be installed together with the impact protection housing (E7000A).; If not pneumatically operated, E75231 sealing plug must be inserted.; Avoid ingress of dirt and dust.; Do not connect any of the following points to an external potential:; L-, L+, I-1/2, I-2; The connections are electrically connected with the AS-i cable.; Please see the notes on compressed air and EMC/ESD under "Downloads" |
| Pack quantity | 1 pcs. |
Electrical connection
| quick mounting technology for AS-i flat cable | ; three orientations possible |
