Home / Beckhoff / EtherCAT Terminal, 2-channel motion interface, stepper motor, 48 V DC, 3 A, push-in, with incremental encoder, 5 V DC

Disponibile su richiesta

EtherCAT Terminal, 2-channel motion interface, stepper motor, 48 V DC, 3 A, push-in, with incremental encoder, 5 V DC

Name: EtherCAT Terminal, 2-channel motion interface, stepper motor, 48 V DC, 3 A, push-in, with incremental encoder, 5 V DC
Brand: Beckhoff
SKU: ED7062

Codice: ED7062 · Marchio: Beckhoff

Prezzo su richiesta

Richiedi un preventivo

Garanzia di 12 mesi (nuovo) · 3 mesi (usato/rigenerato)

Reso entro 30 giorni, nessuna commissione di riassortimento sui pezzi non utilizzati

Spedito tramite

In breve

Disponibilità	Conferma su richiesta
Categoria	EL/ED/ELM7xxx \| Compact drive technology
Ciclo di vita	active
Garanzia	12 mesi (nuovo) · 3 mesi (usato/rigenerato)

Spedizione e disponibilità

Quando può essere spedito ED7062?

ED7062 viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.

Posso ritirare ED7062 di persona?

Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.

È disponibile la consegna espressa?

Sì — menzionalo nella richiesta di preventivo per ED7062 e includeremo le opzioni di spedizione espressa nella nostra risposta.

Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?

In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per ED7062, in base a disponibilità e destinazione.

The ED7062 EtherCAT Terminal is designed for direct connection of two stepper motors in the medium power range up to 3 A and for a voltage range from 8 V DC to 48 V DC. The stepper motor output stage is integrated into the EtherCAT Terminal in a compact

Specifiche

Specifications

Number of channels \| Total	2
Internal communication protocol	EtherCAT
Number of channels	2
Load type	ohmic, inductive
Load supply \| Input voltage	8…48 V DC
Output current \| Rated current	max. 6 A
Output current \| Rated current (per channel)	max. 5 A
Step frequency	max. 16,000 full steps/s
Microstepping	16,384 intermediate steps per full step
Frequency \| PWM	16 kHz
Frequency \| Current controller	32 kHz
Frequency \| Position controller	16 kHz
Frequency \| Speed controller	16 kHz
STO	no
SS1	no
Safe Motion	no
Chopper resistance	externally, with EL9576
Function	motor holding brake
Sensor types	incremental encoder
Signal range	5 V differential, single-ended/open collector
Resolution \| Process data (position)	32 bit
Sensor supply \| Output voltage	5 V
Quadrature decoder	ja
Encoder connection	open collector connection: A, B, C
Input frequency	max. 400.000 increments/s with 4-fold evaluation
Open-circuit recognition	no
Connection technology	push-in
Signal range \| Nominal	24 V DC
Specification	positive switching
“0” signal voltage	max. 1.8 V DC
“1” signal voltage	min. 3 V DC
Input current	typ. 1.75 mA
Cable length \| Sensor cable	max. 30 m
Signal range \| Technical	20.4…28.8 V DC
Output current	max. 0.5 A
Short-circuit proof	yes
Short circuit current limit	typ. 2 A
Output stage	push
Breaking energy \| Inductive	no
Distributed clocks	yes
Distributed clocks \| Precision	1 µs
Distributed clocks \| Scope	64 bit
Timestamp	yes
Timestamp \| Precision	1 µs
Timestamp \| Resolution	1 ns
Oversampling	no
Electronics \| Supply voltage	via E-bus
E-bus \| Current consumption	typ. 175 mA
Power contacts \| Input voltage	24 V DC (-15%/+20%)
Power contacts \| Current carrying capacity	max. 10 A DC
Power contacts \| Current consumption	load-dependent
Power contacts \| Output voltage	corresponds to Power contacts \| Input voltage
Electrical isolation \| Channel/channel	no
Electrical isolation \| Channel/bus	functional, 707 V DC type test
Operating temperature	0…55°C
Storage temperature	-25…+85°C
Relative humidity	95%, no condensation
Installation position	see documentation
Vibration resistance	conforms to EN 60068-2-6
Shock resistance	conforms to EN 60068-2-27
EMC immunity	conforms to EN 61000-6-2
EMC emission	conforms to EN 61000-6-4
Markings	CE
Weight	100 g
Protection rating	IP20
Material	polycarbonate
Dimesnions \| Width (single)	27 mm
Dimensions \| Width (lined up)	24 mm
Dimensions \| Height	100 mm
Dimensions \| Depth	65 mm
Installation \| Terminal/back wall	DIN rail, 35 mm (EN 60715)
Installation \| Terminal/terminal	double slot and key connection
Plug-in wiring level	no
Connection cross-section \| Solid wire	0.08…1.5 mm²
Connection cross-section \| Stranded wire	0.25…1.5 mm²
Connection cross-section \| With ferrule	0.14…0.75 mm²
Connection cross-section AWG \| Solid wire	AWG28…16
Connection cross-section AWG \| Stranded wire	AWG22…16
Connection cross-section AWG \| With ferrule	AWG26…19
Stripping length	8…9 mm
Power contact \| "+" (left)	yes
Power contact \| "+" (rechts)	yes
Power contact \| "-" (left)	yes
Power contact \| "-" (right)	yes
Power contact \| "⏚" (left)	no
Power contact \| "⏚" (right)	no
Insertion lock for power contact “⏚”	yes