Motor module with integrated NCT functionality, straight, without infeed
Richiedi un preventivo
In breve
| Disponibilità | Conferma su richiesta |
| Categoria | AT2xxx, ATH2xxx | XTS motor modules |
| Ciclo di vita | active |
| Garanzia | 12 mesi (nuovo) · 3 mesi (usato/rigenerato) |
Spedizione e disponibilità
Quando può essere spedito AT2100?
AT2100 viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.
Posso ritirare AT2100 di persona?
Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.
È disponibile la consegna espressa?
Sì — menzionalo nella richiesta di preventivo per AT2100 e includeremo le opzioni di spedizione espressa nella nostra risposta.
Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?
In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per AT2100, in base a disponibilità e destinazione.
The AT2100 motor modules are elements for building straight XTS line sections with integrated NCT functionality. In combination with electronics mounted on the mover, a power supply and synchronous real-time data communication are available on the mover.
Specifiche
Specifications
| Magnet pitch | ≥ 63 mm |
| Geometries | any (e. g. rectangle, square, circle, straight, L-, U-, O-, Z- or T-shapes) |
| Diameter | 180° curved segment: 267 mm (clothoid), 45° curved segment: 637 mm, 22.5° curved segment: 1273 mm, -22.5° curved segment: 1273 mm (1) |
| Alignment | horizontally, vertically or at any angle from 1…179° |
| Peak force | AT9001-x550 (5-pin): 100 N, AT9001-x775 (7-pin): 130 N, AT9001-xAA0 (10-pin): 210 N (specification refer to straight sections) |
| Continuous force | AT9001-x550 (5-pin): 30 N, AT9001-x775 (7-pin): 45 N, AT9001-xAA0 (10-pin): 75 N (specification refers to straight sections) |
| Max. speed | 4 m/s |
| Max. acceleration | 10 g |
| Payload | up to 40 kg, higher loads with reduced dynamics |
| Absolute accuracy | ±0.25 mm within a straight module |
| Repeatability | ±0.01 mm (standstill unidirectional) |
| Positioning accuracy | ±0.15 mm @ 1.5 m/s within a straight module |
| System size | > 100 m, > 200 movers, larger system limits possible with restrictions |
| Protection rating | IP65 (in assembled condition for a closed system, only waterproof for a short time, not corrosion resistant) |
| Approvals/markings | CE, UL |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| ETSI EMC standard | conforms to EN 301489-1 |
| Motor type | long stator linear motor segment |
| Design form | straight |
| Motor length | 250 mm |
| Connection method | connectors between the motor modules (daisy chaining) |
| Length per feed | max. 2 m (voltage supply, EtherCAT) |
| Cooling | convection |
| Ambient temperature (operation) | 0…40°C |
| Rated power | 768 W |
| Operating voltage | 48 V DC |
| Rated current | 16 A |
| Peak current | 48 A |
| Control voltage | 24 V DC -15/+20% |
| Power consumption control voltage | 35 W per meter travel distance |
| Length | 250 mm |
| Width | 51.7 mm |
| Height | 96 mm |
| Weight | 2.38 kg |
| NCT rated output | up to 35 W (depending on the mover position) |
| NCT peak performance | up to 75 W (depending on the mover position) |
| Output voltage | 24 V DC (regulated) |
| Power transmission | continuously (also across module limits) |
| Communication cycle | 250 µs |
| Communication direction | bidirectional |
| Time response | µs-precise DC synchronization |
| Communication participants | no system limits (individual address assignment of the movers possible) |
| Communication types | cyclic and acyclic |
| Data transfer | continuously (also across module limits) |
