B&R X20CM1201
Demander un devis
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | Digital signal processing and preparation |
| Cycle de vie | active |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand X20CM1201 peut-il être expédié ?
X20CM1201 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer X20CM1201 en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour X20CM1201 et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour X20CM1201, selon la disponibilité et la destination.
Command-dependent digital pattern outputCounter-dependent output circuitEvent-controlled abort criteria4 digital inputs4 digital channels, configurable as inputs or outputs The module can be used to configure and carry out simple movements. For this purpose, the module has one AB encoder input and a total of 8 digital channels. Four of them are inputs, and the other 4 can be set as either an input or an output. Various output bit patterns are stored directly in the module. The module is perfectly suited for easy to create drive control tasks for program and event controlled motor movements. Feed movements using drives with 2 speeds and forward/reverse movement are created easily and efficiently.
Caractéristiques
Specifications
| I/O module | 1 AB incremental encoder 24 V, 4 digital inputs, 4 channels configurable as inputs or outputs |
| Input voltage | 24 VDC -15% / +20% |
| B&R ID code | 0x21EF |
| Status indicators | I/O function per channel, operating state, module status |
| Module run/error | Yes, using LED status indicator and software |
| Outputs | Yes, using LED status indicator and software (output state) |
| Bus | 0.01 W |
| Internal I/O | 1.5 W |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| Type of signal lines | Shielded lines must be used for all signal lines. |
| CE | Yes |
| UKCA | Yes |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| UL | cULus E115267 Industrial control equipment |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| KC | Yes |
| Quantity | Up to 4, configuration as input or output using software |
| Nominal voltage | 24 VDC |
| Input current at 24 VDC | Approx. 1.3 mA |
| Input circuit | Sink |
| Hardware | ≤2 μs |
| Software | - |
| Connection type | 1-wire connections |
| Input resistance | 18.4 kΩ |
| Low | <5 VDC |
| High | >15 VDC |
| Insulation voltage between channel and bus | 500 Veff |
| Encoder inputs | 24 V, asymmetrical |
| Counter size | 32-bit |
| Input frequency | Max. 100 kHz |
| Evaluation | 4x |
| Encoder power supply | Module-internal, max. 600 mA |
| Overload characteristics of encoder power supply | Short-circuit proof, overload-proof |
| Variant | Push / Pull / Push-Pull |
| Switching voltage | 24 VDC -15% / +20% |
| Nominal output current | 0.1 A |
| Total nominal current | 0.4 A |
| Output circuit | Sink or source |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads |
| Actuator power supply | Module-internal, max. 600 mA |
| Diagnostic status | Output monitoring |
| Leakage current when the output is switched off | Max. 25 µA |
| Residual voltage | <0.9 V at 0.1 A nominal current |
| Peak short-circuit current | <10 A |
| Switch-on in the event of overload shutdown or short-circuit shutdown | Approx. 10 ms (depends on the module temperature) |
| 0 → 1 | <2 µs |
| 1 → 0 | <2 µs |
| Resistive load | Max. 24 kHz |
| Inductive load | See section "Switching inductive loads" (at 90% duty cycle). |
| Braking voltage when switching off inductive loads | Switching voltage + 0.6 VDC |
| Electrical isolation | Channel isolated from bus Channel not isolated from channel |
| Horizontal | Yes |
| Vertical | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | - |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Operation | 5 to 95%, non-condensing |
| Note | Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately. |
| Pitch | 12.5+0.2 mm |
Plus de pièces B&R
OccasionB&R 5C5001.01 IPC 5000 5D5500.06 Used
OccasionB&R 8BVI0028HWD0.000-1 Used Rev.O0
OccasionB&R 5PC720.1505-K07 - 5P62:0A-03 Used