B&R X20HB1882
Solicitar presupuesto
Datos rápidos
| Disponibilidad | Confirmación bajo consulta |
| Categoría | System modules for the X20 hub system |
| Ciclo de vida | active |
| Garantía | 12 meses (nuevo) · 3 meses (usado/reacondicionado) |
Envío y disponibilidad
¿Cuándo se puede enviar X20HB1882?
X20HB1882 se abastece bajo pedido — solicite un presupuesto y confirmaremos la disponibilidad exacta y el plazo de entrega para esta unidad concreta.
¿Puedo recoger X20HB1882 en persona?
Es posible recoger el pedido en nuestro almacén de Groningen, Países Bajos — contáctenos antes de realizar el pedido para confirmar disponibilidad y acordar un horario de recogida.
¿Está disponible el envío exprés?
Sí — menciónelo al solicitar un presupuesto para X20HB1882 e incluiremos las opciones de envío exprés en nuestra respuesta.
Nuestra planta está parada y lo necesitamos urgentemente — ¿pueden ayudar?
Ante una avería crítica, contáctenos directamente al +31 (0)50-7110348 o a sales@partnerplc.com — estudiaremos un envío urgente el mismo día o un transporte dedicado para X20HB1882, según disponibilidad y destino.
Hub expansion module1-port hub, 100BASE-FXSingle-mode glass fiber cablesRange up to 50 kmHot-swappable The POWERLINK bus controllers X20BC8083, X20BC8084 (starting with revision D0) and the standalone hub X20HB8880 are equipped with a modular hub extension. 1 or 2 additional slots are available depending on the bus base. The X20HB1882 hub expansion module can be operated in these slots. Please note that the hardware revision of the X20BC8083 and X20HB8880 must be ≥F0.The hub expansion module is designed as a 1-port hub. The Ethernet connection is made using 9/125 µm single-mode glass fiber cables with a duplex LC connector. The module state and network status are indicated using LEDs.
Especificaciones
Specifications
| Hub | 1 Fast Ethernet interface for single-mode fiber optic cables for hub expansion |
| Status indicators | Module status, bus function |
| Module status | Yes, using LED status indicator |
| Bus function | Yes, using LED status indicator |
| Power consumption | 1.65 W |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| UL | cULus E115267 Industrial control equipment |
| DNV | Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
| CCS | Yes |
| LR | ENV1 |
| KR | Yes |
| ABS | Yes |
| BV | EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
| Type | Hub expansion module |
| Variant | 1x female duplex LC |
| Transfer rate | 100 Mbit/s |
| Physical layer | 100BASE-FX |
| Half-duplex | Max. 175 m between 2 stations (segment length) |
| Full-duplex | No |
| Autonegotiation | No |
| Auto-MDI/MDIX | No |
| Hub propagation delay | 0.96 to 1 µs |
| Wave length | Typ. 1300 nm Rx range: 1270 to 1380 nm Tx range: 1270 to 1380 nm |
| Cable fiber type | Single-mode fiber with 9/125 µm core diameter On both sides: Male duplex LC connector |
| Optical power budget | 30 dB |
| POWERLINK | Max. 50 km between 2 stations (segment length) |
| Electrical isolation | Power supply isolated from Ethernet |
| Horizontal | Yes |
| Vertical | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
| Horizontal mounting orientation | -25 to 55°C |
| Vertical mounting orientation | -25 to 45°C |
| Derating | - |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Operation | 5 to 95%, non-condensing |
| Slot | Hub expansion for X20BC8083, X20BC8084 and X20HB8880 |
Más piezas B&R
UsadoB&R 5C5001.01 IPC 5000 5D5500.06 Used
UsadoB&R 5PC720.1505-K07 - 5P62:0A-03 Used