B&R X20BT9400
Solicitar presupuesto
Datos rápidos
| Disponibilidad | Confirmación bajo consulta |
| Categoría | Bus receivers and transmitters |
| Ciclo de vida | active |
| Garantía | 12 meses (nuevo) · 3 meses (usado/reacondicionado) |
Envío y disponibilidad
¿Cuándo se puede enviar X20BT9400?
X20BT9400 se abastece bajo pedido — solicite un presupuesto y confirmaremos la disponibilidad exacta y el plazo de entrega para esta unidad concreta.
¿Puedo recoger X20BT9400 en persona?
Es posible recoger el pedido en nuestro almacén de Groningen, Países Bajos — contáctenos antes de realizar el pedido para confirmar disponibilidad y acordar un horario de recogida.
¿Está disponible el envío exprés?
Sí — menciónelo al solicitar un presupuesto para X20BT9400 e incluiremos las opciones de envío exprés en nuestra respuesta.
Nuestra planta está parada y lo necesitamos urgentemente — ¿pueden ayudar?
Ante una avería crítica, contáctenos directamente al +31 (0)50-7110348 o a sales@partnerplc.com — estudiaremos un envío urgente el mismo día o un transporte dedicado para X20BT9400, según disponibilidad y destino.
X2X Link bus transmitterFor seamless expansion of the systemUp to 100 m segment lengthSupply for internal I/O power supplyIntegrated X2X Link power supply of the X67 systemOperation only on the rightmost slot To connect an X20 system to an X67 system, a bus transmitter is simply connected to the end of the X20 block so that the X2X Link cable can be clamped. The bus transmitter also provides the X2X Link supply voltage of the X67 system. The X67 system power supply module that was previously always necessary can be omitted.The bus transmitter module is only permitted to be operated with a bus module where the internal I/O power supply is connected through (e.g. X20BM11). If the supply is used for the internal I/O power supply, this potential group is not permitted to be supplied by any other module. An I/O module with bus module X20BM01 must be used to isolate the potential group.
Especificaciones
Specifications
| Bus transmitter | X2X Link bus transmitter with supply for I/O and integrated X67 system power supply |
| B&R ID code | 0xA238 |
| Status indicators | X2X bus function, operating state, module status |
| Module run/error | Yes, using LED status indicator and software |
| X2X bus function | Yes, using LED status indicator |
| Power consumption for X2X Link power supply | 1.38 W |
| Bus | 0.5 W |
| As bus transmitter | 0.1 W |
| Additionally as supply module | 0.6 W |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| UL | cULus E115267 Industrial control equipment |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| KC | Yes |
| Input voltage | 24 VDC -15% / +20% |
| Input current | Max. 0.5 A |
| Fuse | Required line fuse: Max. 10 A, slow-blow |
| Reverse polarity protection | No |
| Parallel connection with X67PS1300 | Yes |
| Overload characteristics | Temporarily short-circuit and overload-proof Observe the corresponding status message (LED "I") or evaluate the software status. |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Nominal output voltage | 24 VDC |
| Behavior on short circuit | Required line fuse |
| Permissible contact load | 10 A |
| Horizontal | Yes |
| Vertical | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
| Derating | - |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Operation | 5 to 95%, non-condensing |
| Note | Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 or 1x bus module X20BM15 separately. |
| Pitch | 12.5+0.2 mm |
Más piezas B&R
UsadoB&R 5C5001.01 IPC 5000 5D5500.06 Used
UsadoB&R 5PC720.1505-K07 - 5P62:0A-03 Used