Início / Wago / Fuse plug; with pull-tab; for miniature metric fuses 5 x 20 mm and 5 x 25 mm; without blown fuse indication; 6.1 mm wide; gray

Disponível sob consulta

Fuse plug; with pull-tab; for miniature metric fuses 5 x 20 mm and 5 x 25 mm; without blown fuse indication; 6.1 mm wide; gray

Name: Fuse plug; with pull-tab; for miniature metric fuses 5 x 20 mm and 5 x 25 mm; without blown fuse indication; 6.1 mm wide; gray
Brand: Wago
SKU: 2004-911

Referência: 2004-911 · Marca: Wago

Preço sob consulta

Solicitar orçamento

Garantia de 12 meses (novo) · 3 meses (usado/recondicionado)

Devoluções em 30 dias, sem taxa de reposição em peças não usadas

Envio via

Dados rápidos

Disponibilidade	Confirmação sob consulta
Categoria	Rail-Mount Terminal Blocks
Ciclo de vida	active
Garantia	12 meses (novo) · 3 meses (usado/recondicionado)

Envio e disponibilidade

Quando é que 2004-911 pode ser enviado?

2004-911 é obtido sob encomenda — solicite um orçamento e confirmaremos a disponibilidade exata e o prazo de entrega para esta unidade específica.

Posso levantar 2004-911 pessoalmente?

O levantamento no nosso armazém em Groningen, Países Baixos, pode ser possível — contacte-nos antes de encomendar para confirmar disponibilidade e combinar um horário de levantamento.

A entrega expresso está disponível?

Sim — mencione isso ao solicitar um orçamento para 2004-911 e incluiremos as opções de entrega expresso na nossa resposta.

A nossa fábrica está parada e precisamos disto com urgência — podem ajudar?

Em caso de avaria crítica, contacte-nos diretamente através do +31 (0)50-7110348 ou sales@partnerplc.com — estudaremos um estafeta no mesmo dia ou transporte dedicado para 2004-911, consoante a disponibilidade e o destino.

<h2>Fuse plug, 2004 Series, gray</h2><br/><br/>Seamless electrical installations are guaranteed with this fuse plug (item number 2004-911).<br/><br/><h3></h3>

Especificações

Electrical data - Ratings per IEC/EN

Nominal voltage (III/3)	250 V
Rated current	6.3 A
Operation status indicator	None
Blown fuse indication	without blown fuse indication

Electrical data - Ratings per IEC/EN – Notes

Ratings (note)

Electrical ratings are given by the fuse.

Electrical data - Power Loss

Power loss (max.) P<sub>l (max.)</sub> (note)

When selecting glass cartridge fuses, make sure that the maximum power loss listed below is not exceeded. The power loss is determined according to IEC or EN 60947-7-3/VDE 0611-6 at 23°C. The temperature rise of the terminal block must be checked according to their application and mounting. Higher ambient temperatures represent an additional impact on miniature fuses. Therefore, in such applications, the rated current must be reduced if necessary. More details are available from the manufacturers.

Electrical data - General information

Fuse type

Cylindrical fuse; 5 x 20 mm and 5 x 25 mm

Physical data

Width

6.1 mm / 0.24 inches

Mechanical data

Marking level

Center marking

Material data

Note (material data)	Information on material specifications can be found here
Color	gray
Material group	I
Insulation material (main housing)	Polyamide (PA66)
Flammability class per UL94	V0
Fire load	0.066 MJ
Weight	4 g

Environmental requirements

Processing temperature	-35 … +85 °C
Continuous operating temperature	-60 … +105 °C

Environmental requirements - Environmental Testing

Test specification: <br/>Railway applications –<br/>Rolling stock –<br/>Electronic equipment	DIN EN 50155 (VDE 0115-200):2022-06
Test procedure: <br/>Railway applications – <br/>Rolling stock equipment – <br/>Vibration and shock tests	DIN EN 61373 (VDE 0115-0106):2011-04
Spectrum/Mounting location	Service life test, Category 1, Class A/B
Functional test with noise-like oscillations	Test passed according to Section 8 of the standard
Frequency	f1 = 5 Hz to f2 = 150 Hz
Acceleration	0.101g (highest test level used for all axes)
Test duration per axis	10 min.
Test directions	X, Y and Z axes
Monitoring of contact faults and interruptions	Passed
Voltage drop measurement before and after each axis	Passed
Simulated service life test through increased levels of noise-like oscillations	Test passed according to Section 9 of the standard
Frequency	f1 = 5 Hz to f2 = 150 Hz
Acceleration	0.572g (highest test level used for all axes)
Test duration per axis	5 h
Test directions	X, Y and Z axes
Extended testing: Monitoring of contact faults and interruptions	Passed
Extended testing: Voltage drop measurement before and after each axis	Passed
Shock test	Test passed according to Section 10 of the standard
Shock pulse form	Half sine
Acceleration	5g (highest test level used for all axes)
Shock duration	30 ms
Number of shocks (per axis)	3 pos. und 3 neg.
Test directions	X, Y and Z axes
Extended testing: Monitoring of contact faults and interruptions	Passed
Extended testing: Voltage drop measurement before and after each axis	Passed
Vibration and shock stress for rolling stock equipment	Passed