ISO cylinder-DSBG-...-80- -

Name: ISO cylinder-DSBG-...-80- -
Brand: Festo
SKU: DSBG-...-80- -

Referência: DSBG-...-80- - · Marca: Festo

Preço sob consulta

Solicitar orçamento

Garantia de 12 meses (novo) · 3 meses (usado/recondicionado)

Devoluções em 30 dias, sem taxa de reposição em peças não usadas

Envio via

Dados rápidos

Disponibilidade	Confirmação sob consulta
Categoria	DSBG
Ciclo de vida	active
Garantia	12 meses (novo) · 3 meses (usado/recondicionado)

Envio e disponibilidade

Quando é que DSBG-...-80- - pode ser enviado?

DSBG-...-80- - é obtido sob encomenda — solicite um orçamento e confirmaremos a disponibilidade exata e o prazo de entrega para esta unidade específica.

Posso levantar DSBG-...-80- - pessoalmente?

O levantamento no nosso armazém em Groningen, Países Baixos, pode ser possível — contacte-nos antes de encomendar para confirmar disponibilidade e combinar um horário de levantamento.

A entrega expresso está disponível?

Sim — mencione isso ao solicitar um orçamento para DSBG-...-80- - e incluiremos as opções de entrega expresso na nossa resposta.

A nossa fábrica está parada e precisamos disto com urgência — podem ajudar?

Em caso de avaria crítica, contacte-nos diretamente através do +31 (0)50-7110348 ou sales@partnerplc.com — estudaremos um estafeta no mesmo dia ou transporte dedicado para DSBG-...-80- -, consoante a disponibilidade e o destino.

ISO 15552 (ISO 6431, VDMA 24562) , Sturdy tie rod design , Self-adjusting pneumatic end-position cushioning saves time during commissioning and adapts optimally to load and speed changes , Comprehensive range of mounting accessories for just about every type of installation , For position sensing , Sustainable thanks to extended life cycle and easier repairs

Especificações

Specifications

Stroke	1, 2800 mm
Piston diameter	80 mm
Piston rod thread	M20x1.5, M20, M16x1.5, M16, M12
Torsional backlash at piston rod +/-	-0.45, 0.45 deg
Based on standard	ISO 15552
Cushioning	Elastic cushioning rings/plates at both ends, Self-adjusting pneumatic end-position cushioning, Pneumatic cushioning, adjustable at both ends
Mounting position	optional
Conforms to standard	ISO 15552
Piston-rod end	Male thread, Female thread
Design	Piston, Piston rod, Tie rod, Cylinder barrel
Position detection	Via proximity switch
Symbol	00991217, 00991218, 00991235, 00991237, 00992970, 00992971
Variants	Extended male piston rod thread, Piston rod with female thread, Custom thread on the piston rod, Extended piston rod, Low friction for balancer applications, Metal scraper, With protection against rotation, Uniform, slow movement, Low friction, Through piston rod, Heat-resistant seals max. 120°C, Variable spacer bolt length, Temperature range 0 to 150°C, Temperature range -40 to 80°C, Shortened male piston rod thread, Piston rod at one end
Operating pressure	0.05, 12 bar
Mode of operation	Double-acting
CE mark (see declaration of conformity)	To EU Explosion Protection Directive (ATEX)
UKCA marking (see declaration of conformity)	To UK EX instructions
Explosion protection	Zone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX)
ATEX category gas	II 2G
ATEX category dust	II 2D
Explosion ignition protection type for gas	Ex h IIC T4 Gb
Explosion ignition protection type for dust	Ex h IIIC T120°C Db
Explosion ambient temperature	-20°C <= Ta <= +60°C
Explosion protection certification outside the EU	EPL Db (GB), EPL Gb (GB)
Operating medium	Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium	Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC	2 - Moderate corrosion stress, 3 - high corrosion stress
LABS (PWIS) conformity	VDMA24364-B1/B2-L, VDMA24364 zone III
Ambient temperature	-40, 150 °C
Impact energy in end positions	1.8 J
Cushioning length	32 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke	2721 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke	2721, 3016 N
Additional weight per piston rod extension of 10 mm	39 g
Additional weight per piston rod thread extension of 10 mm	22 g
Type of mounting	Via female thread, With accessories
Pneumatic connection	G3/8
Note on materials	RoHS-compliant
Material cover	Coated die-cast aluminium
Material piston seal	FPM, HNBR, TPE-U(PU)
Material piston	Wrought aluminium alloy
Material piston rod	High-alloy stainless steel, hard chrome-plated, High-alloy steel, High-alloy stainless steel
Material piston rod wiper	FPM, HNBR, PE, TPE-U(PU)
Buffer seal material	FPM, TPE-U(PU)
Material of cushioning boss	Wrought aluminium alloy, POM
Material cylinder barrel	Smooth-anodised wrought aluminium alloy
Material nut	Galvanised steel, High-alloy stainless steel
Material rod wiper	Brass, PTFE reinforced
Material bearing	Bronze, Metal polymer compound, POM
Material collar nut	Galvanised steel
Material tie rod	High-alloy steel, High-alloy stainless steel
Material spacer bolt	High-alloy stainless steel
Material swivel mounting	Painted spheroidal graphite cast iron
Material bellows	NBR, PA