B&R X20DC2395

Name: B&R X20DC2395
Brand: B&R
SKU: X20DC2395

Referência: X20DC2395 · Marca: B&R

Preço sob consulta

Solicitar orçamento

Garantia de 12 meses (novo) · 3 meses (usado/recondicionado)

Devoluções em 30 dias, sem taxa de reposição em peças não usadas

Envio via

Dados rápidos

Disponibilidade	Confirmação sob consulta
Categoria	Counter functions
Ciclo de vida	active
Garantia	12 meses (novo) · 3 meses (usado/recondicionado)

Envio e disponibilidade

Quando é que X20DC2395 pode ser enviado?

X20DC2395 é obtido sob encomenda — solicite um orçamento e confirmaremos a disponibilidade exata e o prazo de entrega para esta unidade específica.

Posso levantar X20DC2395 pessoalmente?

O levantamento no nosso armazém em Groningen, Países Baixos, pode ser possível — contacte-nos antes de encomendar para confirmar disponibilidade e combinar um horário de levantamento.

A entrega expresso está disponível?

Sim — mencione isso ao solicitar um orçamento para X20DC2395 e incluiremos as opções de entrega expresso na nossa resposta.

A nossa fábrica está parada e precisamos disto com urgência — podem ajudar?

Em caso de avaria crítica, contacte-nos diretamente através do +31 (0)50-7110348 ou sales@partnerplc.com — estudaremos um estafeta no mesmo dia ou transporte dedicado para X20DC2395, consoante a disponibilidade e o destino.

24 VDC encoder inputsSSI, ABR, AB or event counters for inputsPulse width modulation for outputs24 VDC and GND for encoder supply This module is a multifunctional counter module. It can be connected to one SSI encoder, one ABR encoder, two AB encoders or four event counters. Two outputs are available for pulse width modulation. The functions can also be mixed.

Especificações

Specifications

I/O module	1 SSI absolute encoders 24 V, 1 ABR incremental encoders 24 V, 2 AB incremental encoders 24 V, 4x event counter or 2x pulse width modulation, time measurement, relative timestamp
Input voltage	24 VDC -15% / +20%
B&R ID code	0x1CD4
Status indicators	I/O function per channel, operating state, module status
Module run/error	Yes, using LED status indicator and software
Outputs	Yes, using LED status indicator and software (output state)
Bus	0.01 W
Internal I/O	1.4 W
Additional power dissipation caused by actuators (resistive) [W]	-
Type of signal lines	Shielded lines must be used for all signal lines.
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
DNV	Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck)
CCS	Yes
LR	ENV1
KR	Yes
ABS	Yes
BV	EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck
KC	Yes
Quantity	2
Encoder inputs	24 V, asymmetrical
Counter size	16-bit
Input frequency	Max. 100 kHz
Evaluation	Each edge, cyclic counter
Encoder power supply	Module-internal, max. 600 mA
Overload characteristics of encoder power supply	Short-circuit proof, overload-proof
Max. transfer rate	125 kbit/s
Coding	Gray/Binary
CLK: Output current	Max. 100 mA
Nominal voltage	24 VDC
Signal form	Square wave pulse
Input current at 24 VDC	Approx. 1.3 mA
Input resistance	18.4 kΩ
Insulation voltage between channel and bus	500 Veff
Counter frequency	200 kHz
Hardware	≤2 µs
Software	-
Low	<5 VDC
High	>15 VDC
Possible measurements	Gate time, period duration, edge offset for various channels
Measurements per module	Up to 9
Measurements per channel	Up to 2
Internal	8 MHz, 4 MHz, 2 MHz, 1 MHz, 500 kHz, 250 kHz, 125 kHz, 62.5 kHz
Measurement type	Continuous or triggered
Variant	Push / Pull / Push-Pull
Switching voltage	24 VDC -15% / +20%
Nominal output current	0.1 A
Total nominal current	0.2 A
Output circuit	Sink or source
Output protection	Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads
Period duration	41.6 µs to 1.36 s
Factor for period duration	n/48000 s, n = 2 to 65535
Pulse duration	0 to 100%
Resolution for pulse duration	0.1%
Actuator power supply	Module-internal, max. 600 mA
Diagnostic status	Output monitoring
Leakage current when the output is switched off	Max. 25 µA
Residual voltage	<0.9 V at 0.1 A nominal current
Peak short-circuit current	<10 A
Switch-on in the event of overload shutdown or short-circuit shutdown	Approx. 10 ms (depends on the module temperature)
0 → 1	<2 µs
1 → 0	<2 µs
Resistive load	Max. 24 kHz
Inductive load	See section "Switching inductive loads".
Braking voltage when switching off inductive loads	Switching voltage + 0.6 VDC
Electrical isolation	Bus isolated from encoder and output Output not isolated from output and encoder Encoder not isolated from encoder
Horizontal	Yes
Vertical	Yes
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	-
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing
Operation	5 to 95%, non-condensing
Note	Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately.
Pitch	12.5+0.2 mm