Peças Wago

Operating tool; Blade: 6.5 x 1.2 mm; with a partially insulated shaft; multicoloured

PCB terminal block; push-button; 2.5 mm²; Pin spacing 7.5/7.62 mm; 18-pole; CAGE CLAMP®; commoning option; gray

System cable; for Siemens S7-1500; 8 analog outputs (current); Length: 3 m; Conductor cross-section: 0.25 mm²

Sensor/Actuator cable; M12A socket; angled; 5-pole; Length: 5 m

THT female header; angled; Pin spacing 5 mm; 18-pole; 0.6 x 1.0 mm solder pin; gray

System cable; for Siemens S7-400; 8 analog outputs (current); Length: 2 m; Conductor cross-section: 0.25 mm²

1-conductor female connector, angled; CAGE CLAMP®; 2.5 mm²; Pin spacing 5 mm; 2-pole; 100% protected against mismating; 2,50 mm²; light gray

2-conductor female connector; Push-in CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 7-pole; 1,50 mm²; green-yellow/gray

2-conductor disconnect terminal block; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; orange

PCB terminal block; push-button; 1.5 mm²; Pin spacing 5/5.08 mm; 16-pole; Push-in CAGE CLAMP®; gray

Sensor/Actuator cable; M8 plug; straight; 3-pole; Length: 1.5 m

1-conductor male connector; Push-in CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 3-pole; Gripping plate; direct marking; 1,50 mm²; light gray

2-conductor terminal block; on both sides with push-button; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; green-yellow

PCB terminal block; 4 mm²; Pin spacing 5 mm; 7-pole; Push-in CAGE CLAMP®; gray

1-conductor male connector; Push-in CAGE CLAMP®; 10 mm²; Pin spacing 7.62 mm; 3-pole; 100% protected against mismating; DIN-35 rail mounting; direct marking; 10,00 mm²; light gray

THT male header; 1.0 x 1.0 mm solder pin; straight; 100% protected against mismating; Gold-plated contacts; Pin spacing 3.5 mm; 5-pole; light gray

System cable; for Siemens S7-400; 8 analog outputs (current); Length: 3 m; Conductor cross-section: 0.25 mm²

4-level terminal block for matrix patching; without locking clips; one potential per level; with 2.3 mm Ø test port; marking: 0-1-2-3--3-2-1-0; for 35 x 7.5 mounting rail; 1.5 mm²; white

Adaptor; FME socket to SMA socket; GSM/ UMTS/ LTE/ Bluetooth®/ WLAN

1-conductor male connector; CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 13-pole; 100% protected against mismating; clamping collar; 1,50 mm²; light gray

1-conductor female connector; Push-in CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 10-pole; Strain relief plate; 1,50 mm²; gray

1-conductor female connector, 2-row; CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 8-pole; 100% protected against mismating; Screw flange; direct marking; 1,50 mm²; black

System cable; for Schneider Twido; 16 digital outputs; Length: 3 m; Conductor cross-section: 0.14 mm²

1-conductor female connector; Push-in CAGE CLAMP®; 4 mm²; Pin spacing 5.2 mm; 7-pole; 4,00 mm²; orange