Fieldbus Coupler DeviceNet
Poproś o wycenę
Najważniejsze informacje
| Dostępność | Potwierdzenie na zapytanie |
| Kategoria | I/O Systems |
| Cykl życia | active |
| Gwarancja | 12 miesięcy (nowe) · 3 miesiące (używane/odnowione) |
Wysyłka i dostępność
Kiedy 750-306 może zostać wysłany?
750-306 jest sprowadzany na zamówienie — poproś o wycenę, a potwierdzimy dokładną dostępność i czas realizacji dla tej konkretnej sztuki.
Czy mogę odebrać 750-306 osobiście?
Odbiór osobisty w naszym magazynie w Groningen w Holandii może być możliwy — skontaktuj się z nami przed złożeniem zamówienia, aby potwierdzić dostępność i ustalić termin odbioru.
Czy dostępna jest dostawa ekspresowa?
Tak — wspomnij o tym w zapytaniu ofertowym dotyczącym 750-306, a w odpowiedzi podamy opcje dostawy ekspresowej.
Nasz zakład stoi i pilnie tego potrzebujemy — czy możecie pomóc?
W przypadku krytycznej awarii skontaktuj się z nami bezpośrednio pod numerem +31 (0)50-7110348 lub e-mailem sales@partnerplc.com — sprawdzimy możliwość kuriera tego samego dnia lub dedykowanego transportu dla 750-306, w zależności od dostępności i miejsca docelowego.
<p>This fieldbus coupler connects the WAGO I/O System as a slave to the Device<b>Net</b><sup></sup> fieldbus.</p><p></p><p>The fieldbus coupler detects all connected I/O modules and creates a local process image. Analog and specialty module data is sent via words and/or bytes; digital data is sent bit by bit.</p><p></p><p>The process image can be transferred via the Device<b>Net</b><sup></sup> fieldbus to the memory of the control system.</p><p></p><p>The local process image is divided into two data zones containing the data received and the data to be sent. The process data can be sent via the Device<b>Net</b><sup>TM</sup> to a control system for further processing. The process output data is sent via Device<b>Net</b><sup>TM</sup>.</p><p></p><p>The data of the analog modules is stored in the process image that is created automatically according to the order in which the modules are connected to the coupler. The bits of the digital modules are sent byte by byte and added to the analog data. If the amount of digital I/O information exceeds eight bits, the coupler automatically starts with a new byte.</p>
Specyfikacja
Notes
| Note | Note: Configuration files required (EDS)! |
Technical data
| Communications | DeviceNet |
| Number of fieldbus nodes on master (max.) | 64 |
| Number of I/O points | 6,000 |
| Transmission rate | 500 kBd (125 kBd, 250 kBd, 500 kBd) |
| Bus segment length (max.) | 500 m |
| Transmission medium (communication/fieldbus) | Shielded Cu cable; Remote bus cable: 2 x 0.82 mm² + 2 x 1.7 mm²; Drop cable: 2 x 0.2 mm² + 2 x 0.32 mm² |
| Number of modules per node (max.) | 64 |
| Number of modules without a bus extension (max.) | 64 |
| DeviceNet features | Polled I/O Message Connection, Strobed I/O Message Connection, Change of State, Cyclic Message Connection, Group 2 only Slave |
| Input and output process image (fieldbus) max. | 512 bytes/512 bytes |
| Supply voltage (system) | 24 VDC (-25 … +30 %); via pluggable connector (CAGE CLAMP® connection) |
| Current consumption (5 V system supply) | 350 mA |
| Total current (system supply) | 1,650 mA |
| Supply voltage (field) | 24 VDC (-25 … +30 %); via power jumper contacts |
| Input current via DeviceNet interface at 11 V | 120 mA |
| Input current (typ.) at nominal load (24 V) | 500 mA |
| Power supply efficiency (typ.) at nominal load (24 V) | 87 % |
| Isolation | 500 V system/field |
| Number of outgoing power jumper contacts | 3 |
| Current carrying capacity (power jumper contacts) | 10 A |
| Certification | ODVA |
Connection data
| Connection technology: communication/fieldbus | DeviceNet: 1 x Male connector; 5-pole |
| Connection technology: field supply | 6 x CAGE CLAMP® |
| Connection technology: system supply | 2 x CAGE CLAMP® |
| Connectable conductor materials | Copper |
| Connection type | System/field supply |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
| Connection technology: device configuration | 1 x Male connector; 4-pole |
Physical data
| Width | 50.5 mm / 1.988 inches |
| Height | 100 mm / 3.937 inches |
| Depth | 71.1 mm / 2.799 inches |
| Depth from upper-edge of DIN-rail | 63.9 mm / 2.516 inches |
Mechanical data
| Mounting type | DIN-35 rail |
Material data
| Color | light gray |
| Housing material | Polycarbonate; polyamide 6.6 |
| Fire load | 3.02 MJ |
| Weight | 200 g |
| Conformity marking | CE |
Environmental requirements
| Ambient temperature (operation) | 0 … +55 °C |
| Ambient temperature (storage) | -25 … +85 °C |
| Protection type | IP20 |
| Pollution degree | 2 per IEC 61131-2 |
| Operating altitude | 0 … 2000 m / 0 … 6562 ft |
| Mounting position | Horizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom |
| Relative humidity (without condensation) | 95 % |
| Vibration resistance | 4g per IEC 60068-2-6 |
| Shock resistance | 15g per IEC 60068-2-27 |
| EMC immunity to interference | per EN 61000-6-2, marine applications |
| EMC emission of interference | per EN 61000-6-4, marine applications |
| Exposure to pollutants | per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 % | 10 ppm |
| Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 % | 25 ppm |
Commercial data
| Product Group | 15 (I/O System) |
| PU (SPU) | 1 pcs |
| Packaging type | Box |
| Country of origin | DE |
| GTIN | 4045454526542 |
| Customs tariff number | 85176200000 |
Product Classification
| UNSPSC | 32151705 |
| eCl@ss 10.0 | 27-24-26-07 |
| eCl@ss 9.0 | 27-24-26-07 |
| ETIM 9.0 | EC001603 |
| ETIM 10.0 | EC001603 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| CAS-No. | 12060-00-3, 1303-86-2, 1317-36-8, 25550-51-0, 7439-92-1, 79-94-7 |
| REACH Candidate List Substance | 2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol, 4-Methyl-1,2-cyclohexanedicarboxylic anhydride, Diboron trioxide, Lead, Lead monoxide, Lead titanium oxide (PbTiO3) |
| RoHS Compliance Status | Compliant,With Exemption |
| RoHS Exemption | 6(c), 7(a), 7(c)-I, 7(c)-II |
| SCIP notification number (Austria) | 20aa056f-7e22-458a-9aef-7f7cb8887f38 |
| SCIP notification number (Belgium) | 0ad10841-08f5-4384-a127-c93147733cb4 |
| SCIP notification number (Bulgaria) | f247add9-1547-471c-91a7-ea6b50763f6a |
| SCIP notification number (Czech Republic) | 23a9be6a-f477-4098-ac3a-f515e4a2bf0d |
| SCIP notification number (Denmark) | e1ec7051-8174-441a-9538-40d560b93308 |
| SCIP notification number (Finland) | 45e3387d-99e2-4e82-b68c-7a81c68c107c |
| SCIP notification number (France) | 51ef14d9-1fc8-497a-b42c-c1685c47b277 |
| SCIP notification number (Germany) | 635f775e-ded2-4f30-be01-4f965ac4ea36 |
| SCIP notification number (Hungary) | 813c6987-a92b-4863-be98-2b5dc13ab20b |
| SCIP notification number (Italy) | 399bd2ce-dc79-4be4-8656-2ba80654e2db |
| SCIP notification number (Netherlands) | d76a4e63-6c84-4a7f-92c8-6a2e675656b3 |
| SCIP notification number (Poland) | 471d6ac6-0aef-46ad-a11b-f03078ec6177 |
| SCIP notification number (Romania) | 44b3f8b6-f2cd-4333-8eec-78188d11b21b |
| SCIP notification number (Sweden) | cfbc572e-d55f-47c2-bc89-40bedd38d22e |
