Dostępny na zapytanie
IFM SUH520
Nr części: SUH520 · Marka: IFM
Cena na zapytanie
Poproś o wycenę
12 miesięcy gwarancji (nowe) · 3 miesiące (używane/odnowione)
30-dniowy zwrot, bez opłaty za uzupełnienie zapasów przy nieużywanych częściach
Wysyłka przez
Najważniejsze informacje
| Dostępność | Potwierdzenie na zapytanie |
| Kategoria | Ultrasonic flow meters |
| Gwarancja | 12 miesięcy (nowe) · 3 miesiące (używane/odnowione) |
Wysyłka i dostępność
Kiedy SUH520 może zostać wysłany?
SUH520 jest sprowadzany na zamówienie — poproś o wycenę, a potwierdzimy dokładną dostępność i czas realizacji dla tej konkretnej sztuki.
Czy mogę odebrać SUH520 osobiście?
Odbiór osobisty w naszym magazynie w Groningen w Holandii może być możliwy — skontaktuj się z nami przed złożeniem zamówienia, aby potwierdzić dostępność i ustalić termin odbioru.
Czy dostępna jest dostawa ekspresowa?
Tak — wspomnij o tym w zapytaniu ofertowym dotyczącym SUH520, a w odpowiedzi podamy opcje dostawy ekspresowej.
Nasz zakład stoi i pilnie tego potrzebujemy — czy możecie pomóc?
W przypadku krytycznej awarii skontaktuj się z nami bezpośrednio pod numerem +31 (0)50-7110348 lub e-mailem sales@partnerplc.com — sprawdzimy możliwość kuriera tego samego dnia lub dedykowanego transportu dla SUH520, w zależności od dostępności i miejsca docelowego.
A robust, component-free measuring pipe made of stainless steel offers high media resistance and permanent ingress resistance The highly accurate inline measurement process eliminates any influence of varying wall thicknesses and pipe materials Operating status LED signals the sensor status and allows conclusions about process quality User-friendly communication and parameterisation via IO-Link
Specyfikacja
Product characteristics
| Measuring range | 20...2400 l/min; 1.2...144 m³/h; 320...38040 gph; 5.2...634 gpm |
| 20...2400 l/min | 1.2...144 m³/h |
| Nominal diameter | DN65 (2 1/2“) |
| Process connection | Clamp DN65 DIN 32676 series A |
Application
| Special feature | Gold-plated contacts |
| Application | food and beverage industry |
| Media | ultra-pure water; water; hydrous media |
| Note on media | hydrous media: for media with >10 % additives, the repeatability is the only available value |
| Medium temperature[°C] [°C] | -40...120; (< 1 h: 150) |
| Min. burst pressure | 40 bar; 4 MPa |
| 40 bar | 4 MPa |
| Pressure rating | 25 bar; 2.5 MPa |
| 25 bar | 2.5 MPa |
| Note on pressure rating | take into account the pressure resistance of the bracket and the seal used for clamp connection |
| Vacuum resistance[mbar] [mbar] | -1000 |
Electrical data
| Operating voltage[V] [V] | 18...32 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 75 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | 5 |
| Measuring principle | ultrasonic |
Inputs / outputs
| Total number of inputs and outputs | 2 |
Inputs
| Inputs | OUT2; counter reset |
| OUT2 | counter reset |
Outputs
| Total number of outputs | 2 |
| Output signal | OUT1; switching signal; pulse signal; diagnostic signal; totaliser switching signal; frequency signal; IO-Link; OUT2; switching signal; pulse signal; diagnostic signal; totaliser switching signal; analogue signal |
| OUT1 | switching signal; pulse signal; diagnostic signal; totaliser switching signal; frequency signal; IO-Link |
| OUT2 | switching signal; pulse signal; diagnostic signal; totaliser switching signal; analogue signal |
| Electrical design | PNP/NPN |
| Pulse output | flow rate meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
| Number of analogue outputs | 1 |
| Analogue current output[mA] [mA] | 4...20 |
| Max. load[Ω] [Ω] | 500 |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Switching frequency DC[Hz] [Hz] | 0...10000 |
Measuring/setting range
| Measuring range | -40...120 °C; -40...248 °F |
| 20...2400 l/min | 1.2...144 m³/h |
| Resolution | 0.1 °C; 0.1 °F |
| 0.1 l/min | 0.001 m³/h |
| Note on factory setting | l/min, °C |
| Set point SP | -39.4...120 °C; -39...248 °F |
| 33.2...2400 l/min | 1.99...144 m³/h |
| Reset point rP | -40...119.4 °C; -40...247 °F |
| 20.7...2387.5 l/min | 1.24...143.25 m³/h |
| Analogue start point ASP | -2400...1920 l/min; -144...115.2 m³/h; -38041...30433 gph; -634...507.2 gpm |
| -2400...1920 l/min | -144...115.2 m³/h |
| Analogue end point AEP | -1920...2400 l/min; -115.2...144 m³/h; -30433...38041 gph; -507.2...634 gpm |
| -1920...2400 l/min | -115.2...144 m³/h |
| Low flow cut-off LFC | 20...120 l/min; 1.2...7.2 m³/h; 317...1902 gph; 5.3...31.7 gpm |
| 20...120 l/min | 1.2...7.2 m³/h |
| Frequency end point, FEP | -8...120 °C; 17.6...248 °F |
| 481.5...2400 l/min | 28.89...144 m³/h |
| Frequency at the end point FRP[Hz] [Hz] | 1...10000 |
| Pulse length[s] [s] | 0.002...2 |
| Pulse value | 0.1...99990000 I; 0.026…26414563.515 gal |
| -40...120 °C | -40...248 °F |
| 0.1 °C | 0.1 °F |
| -39.4...120 °C | -39...248 °F |
| -40...119.4 °C | -40...247 °F |
| Analogue start point | -40...88 °C; -40...190.4 °F |
| -40...88 °C | -40...190.4 °F |
| Analogue end point | -8...120 °C; 17.6...248 °F |
| -8...120 °C | 17.6...248 °F |
| Frequency start point, FSP | -40...88 °C; -40...190.4 °F |
Accuracy / deviations
| Accuracy (in the measuring range) | water; ± (2,0 % MW + 0,5 % MEW) |
| water | ± (2,0 % MW + 0,5 % MEW) |
| Repeatability | ± 0,2 % MEW |
| Accuracy[K] [K] | ± 2,5 (Q > 5 % MEW) |
| Temperature coefficient[% of the span / 10 K] [% of the span / 10 K] | 0,2 |
Response times
| Response time[s] [s] | < 0.5; (dAP = 0, T09) |
| Damping process value dAP[s] [s] | 0...5 |
| Dynamic response T05 / T09[s] [s] | 5,7 / 86 |
Software / programming
| Diagnostic functions | direction of flow detection; signal quality |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1.3 |
| SDCI standard | IEC 61131-9: 2013-07 |
| Profiles | BLOB; Binary Large Object transfer; Common - I&D; Identification and Diagnosis |
| BLOB | Binary Large Object transfer |
| Common - I&D | Identification and Diagnosis |
| Required master port type | A |
| Process data analogue | 3 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 9.6 |
| IO-Link process data (cyclical) | totaliser; 32; Flow monitoring; 32; Temperature monitoring; 32; status; 4; Output 1; 1; Output 2; 1 |
| totaliser | 32 |
| Flow monitoring | 32 |
| Temperature monitoring | 32 |
| status | 4 |
| Output 1 | 1 |
| Output 2 | 1 |
| Supported DeviceIDs | default; 1854 |
| default | 1854 |
Operating conditions
| Ambient temperature[°C] [°C] | -20...60 |
| Storage temperature[°C] [°C] | -25...80 |
| Protection | IP 69; (DIN EN 60529) |
Tests / approvals
| EMC | DIN 61326-1:2021 |
| Shock resistance | DIN IEC 68-2-27; 20 g (11ms) |
| DIN IEC 68-2-27 | 20 g (11ms) |
| Vibration resistance | DIN IEC 68-2-6; 20 g (10...2000Hz) |
| DIN IEC 68-2-6 | 20 g (10...2000Hz) |
| MTTF[years] [years] | 136 |
| UL approval | UL approval no.; I038; File number UL; E174189 |
| UL approval no. | I038 |
| File number UL | E174189 |
| Pressure Equipment Directive | can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight[g] [g] | 1830.4 |
| Housing | rectangular |
| Inlet pipe length | 15 x DN |
| Outlet pipe length | 3 x DN |
| Dimensions[mm] [mm] | 220 x 91 x 139 |
| Materials | housing: stainless steel (316L/1.4404); connector: PEI, FKM |
| Materials (wetted parts) | Pipe section: stainless steel (316L/1.4435); Process connection: stainless steel (316L/1.4404) |
| Nominal diameter | DN65 (2 1/2“) |
| Process connection | Clamp DN65 DIN 32676 series A |
| Process connection suitable for pipe standard | DN65 / Ø 70 mm x 2 mm; (DIN 11866 series A); (DIN EN 10357 series A) |
| Surface characteristics Ra/Rz of the wetted parts | Ra < 0.4 µm (16 µin); Rz = 4 µm (157 µin) |
Displays / operating elements
| Display | operating status; 1 x LED, green |
| operating status | 1 x LED, green |
Accessories
| Items supplied | package insert |
Remarks
| Remarks | MW = measured value; MEW = Final value of the measuring range; pulse and totaliser signal are only available for one of the two outputs; the specified surface characteristics Ra/Rz of the wetted surfaces do not apply to the weld seam. |
| Pack quantity | 1 pcs. |
Electrical connection - plug
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
12 miesięcy gwarancjina wszystkie nowe produkty
3 miesiące gwarancjina części używane i odnowione
30-dniowy zwrotbez opłaty za uzupełnienie zapasów przy nieużywanych częściach
Wysyłka na cały światSzybka dostawa ze śledzeniem przesyłki na całym świecie
