Dostępny na zapytanie
IFM SU8020
Nr części: SU8020 · Marka: IFM
Cena na zapytanie
Poproś o wycenę
12 miesięcy gwarancji (nowe) · 3 miesiące (używane/odnowione)
30-dniowy zwrot, bez opłaty za uzupełnienie zapasów przy nieużywanych częściach
Wysyłka przez
Najważniejsze informacje
| Dostępność | Potwierdzenie na zapytanie |
| Kategoria | Ultrasonic flow meters |
| Gwarancja | 12 miesięcy (nowe) · 3 miesiące (używane/odnowione) |
Wysyłka i dostępność
Kiedy SU8020 może zostać wysłany?
SU8020 jest sprowadzany na zamówienie — poproś o wycenę, a potwierdzimy dokładną dostępność i czas realizacji dla tej konkretnej sztuki.
Czy mogę odebrać SU8020 osobiście?
Odbiór osobisty w naszym magazynie w Groningen w Holandii może być możliwy — skontaktuj się z nami przed złożeniem zamówienia, aby potwierdzić dostępność i ustalić termin odbioru.
Czy dostępna jest dostawa ekspresowa?
Tak — wspomnij o tym w zapytaniu ofertowym dotyczącym SU8020, a w odpowiedzi podamy opcje dostawy ekspresowej.
Nasz zakład stoi i pilnie tego potrzebujemy — czy możecie pomóc?
W przypadku krytycznej awarii skontaktuj się z nami bezpośrednio pod numerem +31 (0)50-7110348 lub e-mailem sales@partnerplc.com — sprawdzimy możliwość kuriera tego samego dnia lub dedykowanego transportu dla SU8020, w zależności od dostępności i miejsca docelowego.
Accurate flow measurement of ultrapure water and water A robust, component-free measuring pipe made of stainless steel offers high media resistance and permanent ingress resistance The highly accurate inline measurement process eliminates any influence of varying wall thicknesses and pipe materials Operating status LED signals the sensor status and allows conclusions about process quality Convenient operation via buttons or parameter setting via IO-Link
Specyfikacja
Product characteristics
| Measuring range | 1...240 l/min; 60...14400 l/h; 0.051...12.202 m/s; 0.06...14.4 m³/h |
| 1...240 l/min | 60...14400 l/h |
| Process connection | threaded connection G 1 external thread DN25 |
Application
| Special feature | Gold-plated contacts |
| Media | ultra-pure water; water; hydrous media |
| Note on media | hydrous media: for media with >10 % additives, the repeatability is the only available value |
| Medium temperature[°C] [°C] | -20...100 |
| Min. burst pressure | 150 bar; 15 MPa |
| 150 bar | 15 MPa |
| Pressure rating | 100 bar; 10 MPa |
| 100 bar | 10 MPa |
| Vacuum resistance[mbar] [mbar] | -1000 |
| MAWP for applications according to CRN | 82.8 bar; 8.28 MPa |
| 82.8 bar | 8.28 MPa |
Electrical data
| Operating voltage[V] [V] | 18...32 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 75 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | 5 |
| Measuring principle | ultrasonic |
Inputs
| Inputs | counter reset |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; pulse signal; analogue signal; IO-Link; frequency signal; diagnostic signal; totaliser switching signal |
| Electrical design | PNP/NPN |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Switching frequency DC[Hz] [Hz] | 0...10000 |
| Analogue current output[mA] [mA] | 4...20 |
| Max. load[Ω] [Ω] | 500 |
| Pulse output | flow rate meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Measuring range | 1...240 l/min; 60...14400 l/h; 0.051...12.202 m/s; 0.06...14.4 m³/h |
| 1...240 l/min | 60...14400 l/h |
| Display range | -288...288 l/min; -17280...17280 l/h; -14.642...14.642 m/s; -17.28...17.28 m³/h |
| -288...288 l/min | -17280...17280 l/h |
| Resolution | 0.1 l/min; 1 l/h; 0.001 m/s; 0.002 m³/h |
| 0.1 l/min | 1 l/h |
| Set point SP | 2.3...240 l/min; 139...14400 l/h; 0.118...12.202 m/s; 0.139...14.4 m³/h |
| 2.3...240 l/min | 139...14400 l/h |
| Reset point rP | 1.1...238.8 l/min; 64...14325 l/h; 0.055...12.139 m/s; 0.064...14.325 m³/h |
| 1.1...238.8 l/min | 64...14325 l/h |
| Analogue start point ASP | -240...192 l/min; -14400...11522 l/h; -12.202...9.763 m/s; -14.4...11.522 m³/h |
| -240...192 l/min | -14400...11522 l/h |
| Analogue end point AEP | -192...240 l/min; -11522...14400 l/h; -9.763...12.202 m/s; -11.522...14.4 m³/h |
| -192...240 l/min | -11522...14400 l/h |
| Low flow cut-off LFC | 1...12 l/min; 60...720 l/h; 0.051...0.61 m/s; 0.06...0.72 m³/h |
| 1...12 l/min | 60...720 l/h |
| Frequency end point, FEP | 48.1...240 l/min; 2889...14400 l/h; 2.448...12.202 m/s; 2.89...14.4 m³/h |
| 48.1...240 l/min | 2889...14400 l/h |
| Frequency at the end point FRP[Hz] [Hz] | 1...10000 |
| Pulse length[s] [s] | 0.002...2 |
| Pulse value | 0.02...99990000 I |
| Measuring range[°C] [°C] | -20...100 |
| Display range[°C] [°C] | -44...124 |
| Resolution[°C] [°C] | 0.1 |
| Set point SP[°C] [°C] | -19.6...100 |
| Reset point rP[°C] [°C] | -20...99.6 |
| Analogue start point[°C] [°C] | -20...76 |
| Analogue end point[°C] [°C] | 4...100 |
| Frequency start point, FSP[°C] [°C] | -20...76 |
| Frequency end point, FEP[°C] [°C] | 4...100 |
Accuracy / deviations
| Accuracy (in the measuring range) | ± (1,0 % MW + 0,5 % MEW) |
| Repeatability | ± 0,2 % MEW |
| Accuracy[K] [K] | ± 2,5 (Q > 5 % MEW) |
| Temperature coefficient[% of the span / 10 K] [% of the span / 10 K] | 0,2 |
Response times
| Response time[s] [s] | < 0.25; (dAP = 0, T09) |
| Damping process value dAP[s] [s] | 0...5 |
| Dynamic response T05 / T09[s] [s] | 5,7 / 86 |
Software / programming
| Diagnostic functions | direction of flow detection; signal quality |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1.3 |
| SDCI standard | IEC 61131-9: 2013-07 |
| Profiles | BLOB; Binary Large Object transfer; Common - I&D; Identification and Diagnosis |
| BLOB | Binary Large Object transfer |
| Common - I&D | Identification and Diagnosis |
| Required master port type | A |
| Process data analogue | 3 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 9.6 |
| IO-Link process data (cyclical) | totaliser; 32; Flow monitoring; 32; Temperature monitoring; 32; status; 4; Output 1; 1; Output 2; 1 |
| totaliser | 32 |
| Flow monitoring | 32 |
| Temperature monitoring | 32 |
| status | 4 |
| Output 1 | 1 |
| Output 2 | 1 |
| Supported DeviceIDs | default; 1460 |
| default | 1460 |
Operating conditions
| Ambient temperature[°C] [°C] | -20...60 |
| Storage temperature[°C] [°C] | -25...80 |
| Protection | IP 67 |
Tests / approvals
| EMC | DIN 61326-1:2021 |
| CPA approval | model number; 002US; accuracy class; 1,5 |
| model number | 002US |
| accuracy class | 1,5 |
| Shock resistance | DIN IEC 68-2-27; 20 g (11ms) |
| DIN IEC 68-2-27 | 20 g (11ms) |
| Vibration resistance | DIN IEC 68-2-6; 20 g (10...2000Hz) |
| DIN IEC 68-2-6 | 20 g (10...2000Hz) |
| MTTF[years] [years] | 160 |
| UL approval | UL approval no.; I034; File number UL; E174189 |
| UL approval no. | I034 |
| File number UL | E174189 |
| Pressure Equipment Directive | can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight[g] [g] | 542.95 |
| Housing | rectangular |
| Type of mounting | inlet pipe length 5xDN; outlet pipe length 1xDN |
| Dimensions[mm] [mm] | 130 x 48 x 65.2 |
| Materials | housing: stainless steel (316L/1.4404); Display: PFA; Sealing Display: FKM; connector: PBT |
| Materials (wetted parts) | Pipe section: stainless steel (316L/1.4404); Process connection sealing: NBR reinforced fibre Flat seal |
| Process connection | threaded connection G 1 external thread DN25 |
| Surface characteristics Ra/Rz of the wetted parts | Ra < 1.25 µm |
Displays / operating elements
| Display | colour display 1,44", 128 x 128 pixels; Switching function; 2 x LED, yellow; diagnosis; 1 x LED, three-colour |
| Switching function | 2 x LED, yellow |
| diagnosis | 1 x LED, three-colour |
Accessories
| Items supplied | Flat seal 2, Centellen; package insert |
Remarks
| Remarks | MW = measured value; MEW = Final value of the measuring range; pulse and totaliser signal are only available for one of the two outputs; the accuracy indications are adhered to over the entire application area |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
12 miesięcy gwarancjina wszystkie nowe produkty
3 miesiące gwarancjina części używane i odnowione
30-dniowy zwrotbez opłaty za uzupełnienie zapasów przy nieużywanych częściach
Wysyłka na cały światSzybka dostawa ze śledzeniem przesyłki na całym świecie
