Pressure regulator-MS4-LRB
Poproś o wycenę
Najważniejsze informacje
| Dostępność | Potwierdzenie na zapytanie |
| Kategoria | MS4-LRB |
| Cykl życia | active |
| Gwarancja | 12 miesięcy (nowe) · 3 miesiące (używane/odnowione) |
Wysyłka i dostępność
Kiedy MS4-LRB może zostać wysłany?
MS4-LRB jest sprowadzany na zamówienie — poproś o wycenę, a potwierdzimy dokładną dostępność i czas realizacji dla tej konkretnej sztuki.
Czy mogę odebrać MS4-LRB osobiście?
Odbiór osobisty w naszym magazynie w Groningen w Holandii może być możliwy — skontaktuj się z nami przed złożeniem zamówienia, aby potwierdzić dostępność i ustalić termin odbioru.
Czy dostępna jest dostawa ekspresowa?
Tak — wspomnij o tym w zapytaniu ofertowym dotyczącym MS4-LRB, a w odpowiedzi podamy opcje dostawy ekspresowej.
Nasz zakład stoi i pilnie tego potrzebujemy — czy możecie pomóc?
W przypadku krytycznej awarii skontaktuj się z nami bezpośrednio pod numerem +31 (0)50-7110348 lub e-mailem sales@partnerplc.com — sprawdzimy możliwość kuriera tego samego dnia lub dedykowanego transportu dla MS4-LRB, w zależności od dostępności i miejsca docelowego.
Grid dimension 40mm , To build a regulator manifold with through air supply for pressure ranges that can be adjusted independently of one another , Good control characteristics with minimal pressure hysteresis and primary pressure compensation , Lockable rotary knob , With or without secondary exhausting , Integrated return flow option for exhausting from output 2 to input 1 , Optional pressure sensor and rotary knob pressure gauge
Specyfikacja
Specifications
| Size | 4 |
| Series | MS |
| Actuator lock | Rotary knob with detent, Rotary knob with integrated lock, can be closed with accessories |
| Mounting position | optional |
| Design | Pressure regulator with pressure gauge |
| Controller function | Output pressure constant, With secondary venting, With return flow function |
| Pressure gauge (ANALOG) or Pressure display (DIGITAL) | Prepared for G1/4, Prepared for G1/8, Via pressure sensor, With pressure gauge |
| Operating pressure | 0.8, 14 bar |
| Pressure regulation range | 0.3, 12 bar |
| Max. pressure hysteresis | 0.25 bar |
| Standard nominal flow rate (standardised to DIN 1343) | 300, 2200 l/min |
| Approval | c UL us - Recognized (OL) |
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) |
| UKCA marking (see declaration of conformity) | To UK EX instructions |
| Explosion protection certification outside the EU | EPL Db (GB), EPL Gb (GB) |
| Explosion protection | Zone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T60°C Db X |
| Explosion ambient temperature | -10 °C <= Ta <= +60 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4], Inert gases |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Storage temperature | -10, 60 °C |
| Suitable for use with food | See supplementary material information |
| Media temperature | -10, 60 °C |
| Ambient temperature | -10, 60 °C |
| Product weight | 222 g |
| Type of mounting | Front panel mounting, In-line installation, With accessories |
| Note on materials | RoHS-compliant |
| Material sub-base | Die-cast aluminium |
| Material control panel | PA, POM |
| Material seals | NBR |
| Material housing | Die-cast aluminium |
| Material membrane | NBR |
Więcej części Festo
UżywanyFesto 560207 - HGPT-25-A-B-F Used
Dostępny na zapytaniePush-in connector-NPQP-D-Q6-S8-FD-P10
Dostępny na zapytaniePush-in T-fitting-NPQE-LT-R18-Q4-P10