BALL RUNNER BLOCK CARBON STEEL KWE-025-SLH-C2-H-1
Poproś o wycenę
Najważniejsze informacje
| Dostępność | Potwierdzenie na zapytanie |
| Kategoria | Ball runner blocks Compact Line BSCL |
| Cykl życia | active |
| Gwarancja | 12 miesięcy (nowe) · 3 miesiące (używane/odnowione) |
Wysyłka i dostępność
Kiedy R205F22320 może zostać wysłany?
R205F22320 jest sprowadzany na zamówienie — poproś o wycenę, a potwierdzimy dokładną dostępność i czas realizacji dla tej konkretnej sztuki.
Czy mogę odebrać R205F22320 osobiście?
Odbiór osobisty w naszym magazynie w Groningen w Holandii może być możliwy — skontaktuj się z nami przed złożeniem zamówienia, aby potwierdzić dostępność i ustalić termin odbioru.
Czy dostępna jest dostawa ekspresowa?
Tak — wspomnij o tym w zapytaniu ofertowym dotyczącym R205F22320, a w odpowiedzi podamy opcje dostawy ekspresowej.
Nasz zakład stoi i pilnie tego potrzebujemy — czy możecie pomóc?
W przypadku krytycznej awarii skontaktuj się z nami bezpośrednio pod numerem +31 (0)50-7110348 lub e-mailem sales@partnerplc.com — sprawdzimy możliwość kuriera tego samego dnia lub dedykowanego transportu dla R205F22320, w zależności od dostępności i miejsca docelowego.
The Compact Line ball runner block is precise and characterized by the following product features:<br>Size 25<br>Format SLH - slimline, long, high<br>Runner block body made of unalloyed steel CS<br>Preload class C2: Medium preload<br>Accuracy class H: Highly accurate<br>Without ball chain<br>With initial lubrication and preservation<br>Runner block body in standard version<br>Overall length of the runner block = 107.9 mm<br>Interchangeability: The runner block and the guide rails can be combined with each other with every accuracy. Area of application: For restricted space in the transverse direction and high rigidity requirements Load capacity: Very high Higher rigidity than SLS
Specyfikacja
Specifications
| Version | Ball rail system |
| Nominal size [mm] | 25 |
| Format | SLH - slimline, long, high |
| Model | Compact Line ball runner block |
| Preload class | C2 - Medium preload |
| Accuracy class | H - Highly accurate |
| Seal | SS - Standard seal |
| Ball chain | Without ball chain (standard) |
| Width of runner block [mm] | 48.0 |
| Length of runner block [mm] | 107.9 |
| Height of runner block [mm] | 34.0 |
| Height runner block with guide rail [mm] | 40.0 |
| Lubrication | Pre-lubricated, preserved |
| Maximum acceleration rate amax [m/s²] | 500.0 |
| Note: Max. acceleration amax | If F<sub>comb</sub>◡> 2.8 • F<sub>pr</sub> : a<sub>max</sub> = 50 m/s<sup>2</sup> |
| Maximum permissible linear speed vmax [m/s] | 5.0 |
| Permissible ambient temperature (min. ... max.) | -10 °C ... +80 °C |
| Note: permissible ambient temperature (min. ... max.) | 100°C admissible for a short time. |
| Friction coefficient μ | 0.002 ... 0.003 |
| Note: friction coefficient μ | Friction coefficient µ without seal friction |
| Weight [kg] | 0.79 |
| Dynamic load capacity C50 [N] | 35300.0 |
| Note: dynamic load capacity C50 | Dynamic load capacities and load moments are based on a travel of 50,000 m according to DIN ISO 14728-1. |
| Dynamic load capacity C100 [N] | 28000.0 |
| Note: dynamic load capacity C100 | Dynamic load capacities and load moments are based on a travel of 100,000 m according to DIN ISO 14728-1. |
| Static load capacity C0 [N] | 44200.0 |
| Dynamic torsional moment load capacity Mt50 [Nm] | 440.0 |
| Note: Dynamic torsional moment load capacity Mt50 | Dynamic load capacities and load moments are based on a travel of 50,000 m according to DIN ISO 14728-1. |
| Dynamic torsional moment load capacity Mt100 [Nm] | 350.0 |
| Note: Dynamic torsional moment load capacity Mt100 | Dynamic load capacities and load moments are based on a travel of 100,000 m according to DIN ISO 14728-1. |
| Static torsional moment load capacity Mt0 [Nm] | 550 |
| Dynamic longitudinal moment load capacity ML50 [Nm] | 490.0 |
| Note: Dynamic longitudinal moment load capacity ML50 | Dynamic load capacities and load moments are based on a travel of 50,000 m according to DIN ISO 14728-1. |
| Dynamic longitudinal moment load capacity ML100 [Nm] | 390.0 |
| Note: Dynamic longitudinal moment load capacity ML100 | Dynamic load capacities and load moments are based on a travel of 100,000 m according to DIN ISO 14728-1. |
| Static longitudinal moment load capacity ML0 [Nm] | 620 |
| Pitch T guide rail [mm] | 60 |
| Dimension A (profiled rail systems) [mm] | 48 |
| Dimension A1 (profiled rail systems) [mm] | 24 |
| Dimension A2 (profiled rail systems) [mm] | 23 |
| Dimension A3 (profiled rail systems) [mm] | 12.5 |
| Dimension B (profiled rail systems) [mm] | 107.9 |
| Dimension B tolerance (profiled rail systems) [mm] | +0.5 |
| Dimension B1 [mm] | 79.5 |
| Dimension E1 [mm] | 35 |
| Dimension E2 [mm] | 50 |
| Dimension E8 (profiled rail systems) [mm] | 33 |
| Dimension E9 (profiled rail systems) [mm] | 17 |
| Dimension H [mm] | 40.0 |
| Dimension H1 (profiled rail systems) [mm] | 34 |
| Dimension H2 (profiled rail systems) [mm] | 20 |
| Dimension K1 (profiled rail systems) [mm] | 20.8 |
| Dimension K2 (profiled rail systems) [mm] | 20.85 |
| Dimension K3 (profiled rail systems) [mm] | 11 |
| Dimension K4 (profiled rail systems) [mm] | 11 |
| Dimension N3 (profiled rail systems) [mm] | 9 |
| Dimension N6 (profiled rail systems) [mm] | 11.3 |
| Dimension N6 tolerance (profiled rail systems) [mm] | ±0.5 |
| Dimension S2 (profiled rail systems) | M6 |
| Dimension S5 (profiled rail system) [mm] | 7 |
| Dimension S9 | M3x6.5 mm |
| Dimension S9 thread diameter (profiled rail systems) | M3 |
| Dimension S9 lead [mm] | 6.5 |
| Dimension T [mm] | 60 |
| Dimension T1 min [mm] | 13 |
| Dimension V1 [mm] | 7.5 |
| Height of guide rail H2 [mm] | 20.0 |
Więcej części Bosch Rexroth
UżywanyRexroth PDP01 02 328104 Used
UżywanyRexroth HCS03.1E-W0150-A-05-NNBV Used
UżywanyRexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used