Disponibile su richiesta

pre-assembled connecting cable; Eca; Socket/open-ended; 2-pole; Cod. I; H05Z1Z1-F 2 x 1,50 mm²; 4 m; 1,50 mm²; blue

Codice: 771-8982/116-402 · Marchio: Wago
Prezzo su richiesta
Richiedi un preventivo

Una persona ti risponderà, in genere entro 1 giorno lavorativo — vedi la nostra informativa sulla privacy.

Garanzia di 12 mesi (nuovo) · 3 mesi (usato/rigenerato)
Reso entro 30 giorni, nessuna commissione di riassortimento sui pezzi non utilizzati
Spedito tramite

In breve

DisponibilitàConferma su richiesta
CategoriaPluggable Connectors
Ciclo di vitaactive
Garanzia12 mesi (nuovo) · 3 mesi (usato/rigenerato)

Spedizione e disponibilità

Quando può essere spedito 771-8982/116-402?

771-8982/116-402 viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.

Posso ritirare 771-8982/116-402 di persona?

Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.

È disponibile la consegna espressa?

Sì — menzionalo nella richiesta di preventivo per 771-8982/116-402 e includeremo le opzioni di spedizione espressa nella nostra risposta.

Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?

In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per 771-8982/116-402, in base a disponibilità e destinazione.

<h2>Cable assembly <i>WINSTA</i>® MIDI 2-pole</h2><br/><br/>For power and signal transmission: The <i>WINSTA</i>® MIDI cable assembly I coding. Whether on PCBs, in control cabinets or for connecting lights – pluggable installation connectors from WAGO allow you to make connections according to a huge variety of requirements in no time flat. For greater protection in electrical installations, the pluggable installation connector is provided with mechanical protection against mismating. The pluggable installation connector is protected in accordance with protection type IP20 (When mated: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)). This means that users' fingers will never come into contact with electrified elements. I coding in blue is used to label <i>WINSTA</i>® MIDI pluggable installation connectors, which are used primarily in building automation for activating lighting. <i>WINSTA</i>® MIDI with Push-in CAGE CLAMP® spring pressure connection technology is used in can be found in a variety of projects you can use for quick, easy, secure, tailored electrical installation. Of course, the safety of buildings must always be ensured, even after the electrical installation has been performed. The mandatory safety requirements in connection with EU CPR are fully satisfied by this product through fire class E. The cable assembly is free of halogen. This eliminates the addition of environmental pollutants during production. It also increases the fire class, since halogen-free materials are flame-resistant.<br/><br/><h3>Fast, secure pluggable connections – cable assemblies from WAGO</h3><br/><br/>The cable assembly is equipped with a socket and a free end. WINSTA® is the pluggable connection system that is ideally tailored to the strict requirements of electrical installation. It allows error-free installation of cables and components, quickly and reliably. Choose quality and durability – with protection type IP20 from WAGO makes the electrical installation of electrical components significantly easier. <br/><br/><ul><br/><li>pluggable installation connectors with protection against mismating</li><li>pre-assembled versions</li><li>for lighting management</li><li>custom-engineered solutions</li><li>fast, secure installation</li></ul>

Specifiche

Notes

NoteCables with a different fire class can be found in the eShop.

Electrical data - Ratings per IEC/EN

Ratings perIEC/EN 60664-1
Nominal voltage (III/3)250 V
Rated impulse withstand voltage (III / 3)4 kV
Rated current16 A
Legend (ratings)(III / 3) ≙ Overvoltage category III / Pollution degree 3
Ratings perIEC/EN 60664-1 / IEC/EN 60664-1 / IEC/EN 60664-1
Overvoltage categoryIII / III / II
Pollution degree3 / 2 / 2
Nominal voltage250 V
Rated impulse withstand voltage4 kV
Rated current16 A

Electrical data - General information

Note on contact resistanceapprox. 1 mΩ of contact resistance approx. 0.25 mΩ contact transition plug/socket

Connection data

Total number of potentials2
Conductor preparationultrasonically tip-bonded

Connection data - Connection 1

Strip length9 mm / 0.35 inches
Pole number2
Wire cross-section1.5 mm²
Strip length (outer insulation)35 mm
Connection typeSocket - Free end

Physical data

Pin spacing10 mm / 0.394 inches
Width24.6 mm / 0.969 inches
Height15.9 mm / 0.626 inches
Total length4 m

Mechanical data

UseDALI, Lighting Management
CodingI
Variable codingNo
MarkingDA+ DA-
Potential markingDA+ DA-
Mating force of a plug-in connectionapprox. 20 … 70 N (depending on pole number)
Retention force of a plug-in connectionwhen locked: > 80N
Unmating force of a plug-in connectionwhen unlocked: approx. 20 … 70 N (depending on pole number)
Number of mating cycles200, without resistive load
Connection typeSocket - Free end
Type of pre-assembled cableConnecting cable
Cable typeH05Z1Z1-F 2x1.5
Protection typeIP20; When mated: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)

Plug-in connection

Mismating protectionYes
Note on mismating protectionAll WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180 c.) plugging while laterally staggeredd.) plugging one pole
Locking leverCan be retrofitted
Locking of plug-in connectionlocking lever
Note on locking systemAll connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).

Material data

Note (material data)Information on material specifications can be found here
Colorblue
Insulation material (main housing)Polyamide (PA66)
Flammability class per UL94V0
Fire class per EN 50575Eca
Contact materialCopper or copper alloy; surface-treated
Contact platingTin
Fire load119.682 MJ
Connector colorblue
Strain relief colorwhite
Sheathed cable colorwhite
Printing color of sheathed cableblack
Halogen-freeYes
Silicon-freeYes
Sheath materialHalogen-free
Rubber cableNo
Weight327.4 g
Copper weight of the raw cable0.029 kg/m

Environmental requirements

Processing temperature-5 … +40 °C
Continuous operating temperature-35 … +85 °C
Note on continuous operating temperatureCable for temperatures ≤ 70 °C (including halogen-free)Insulating parts for temperatures ≤ 105 °C

Commercial data

PU (SPU)1 pcs
Packaging typeunpacked
Country of originDE
GTIN4055143471534
Customs tariff number85444290900

Product Classification

UNSPSC26121629
eCl@ss 10.027-44-06-04
eCl@ss 9.027-44-06-04
ETIM 9.0EC002587
ETIM 10.0EC002587
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,No Exemption
Garanzia di 12 mesisu tutti i prodotti nuovi
Garanzia di 3 mesisu pezzi usati e rigenerati
Reso entro 30 giorninessuna commissione di riassortimento sui pezzi non utilizzati
Spedizione globaleConsegna rapida e tracciata in tutto il mondo

Altri componenti Wago

Wago - 8MCSUsatoWago - 8MCS
Codice: 8MCS · Wago
€5.30
Vedi dettagli
Wago - 4MCSUsatoWago - 4MCS
Codice: 4MCS · Wago
€5.30
Vedi dettagli
Wago AW6 26-14UsatoWago AW6 26-14
Codice: AW6 26-14 · Wago
€5.30
Vedi dettagli
WAGO 750-602 UsedUsatoWAGO 750-602 Used
Codice: 750-602 · Wago
€10.60
Vedi dettagli