Power Supply; 24 VDC; fuse holder; Diagnostics
Richiedi un preventivo
In breve
| Disponibilità | Conferma su richiesta |
| Categoria | I/O Systems |
| Ciclo di vita | active |
| Garanzia | 12 mesi (nuovo) · 3 mesi (usato/rigenerato) |
Spedizione e disponibilità
Quando può essere spedito 750-610?
750-610 viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.
Posso ritirare 750-610 di persona?
Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.
È disponibile la consegna espressa?
Sì — menzionalo nella richiesta di preventivo per 750-610 e includeremo le opzioni di spedizione espressa nella nostra risposta.
Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?
In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per 750-610, in base a disponibilità e destinazione.
<p>This supply module provides the I/O modules with the corresponding supply potential.</p><p></p><p>The maximum current provided by the supply module is 6.3 A. When configuring the system, the total current must not be exceeded. Should higher currents be necessary, an intermediate supply module must be added to the assembly.</p><p></p><p>This module is fuse-protected (5 x 20 mm). The fuse can be changed quickly, with ease, from the retractable fuse carrier.</p><p></p><p>A blown fuse and the status of the supply voltage are indicated via LEDs.</p><p></p><p>The I/O module sends information about the status of the supply module to the fieldbus coupler through two input bits. One bit is for the status of the fuse. The other bit is for the status of the supply voltage</p>
Specifiche
Technical data
| Signal type | Voltage |
| Signal type (voltage) | 24 VDC |
| Supply voltage (system) | 5 VDC; via data contacts |
| Supply voltage (field) | 24 VDC (-25 … +30 %); via power jumper contacts (power supply via CAGE CLAMP® connection; transmission (field-side supply voltage only) via spring contact |
| Current consumption (5 V system supply) | 5 mA |
| Current carrying capacity (power jumper contacts) | 6.3 A |
| Number of outgoing power jumper contacts | 3 |
| Fuse | 5 x 20; T 6.3 A (not included) |
| Diagnostics | Supply voltage (field): Detection “on” at > 15 VDC; Detection “off” at < 5 VDC |
| Data width | 2 bits (1 bit current monitoring, 1 bit fuse fault) |
| Indicators | LED (A) red: defective fuse error; LED (B) green: power supply status |
Connection data
| Connectable conductor materials | Copper |
| Connection type | Field supply |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
| Connection technology: field supply | 6 x CAGE CLAMP® |
Physical data
| Width | 12 mm / 0.472 inches |
| Height | 100 mm / 3.937 inches |
| Depth | 69.8 mm / 2.748 inches |
| Depth from upper-edge of DIN-rail | 62.6 mm / 2.465 inches |
Mechanical data
| Mounting type | DIN-35 rail |
| Pluggable connector | fixed |
Material data
| Housing material | Polycarbonate; polyamide 6.6 |
| Fire load | 1.308 MJ |
| Weight | 46.8 g |
| Conformity marking | CE |
Environmental requirements
| Ambient temperature (operation) | 0 … +55 °C |
| Ambient temperature (storage) | -40 … +85 °C |
| Protection type | IP20 |
| Pollution degree | 2 per IEC 61131-2 |
| Operating altitude | 0 … 2000 m / 0 … 6562 ft |
| Mounting position | Horizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom |
| Relative humidity (without condensation) | 95 % |
| Vibration resistance | 4g per IEC 60068-2-6 |
| Shock resistance | 15g per IEC 60068-2-27 |
| EMC immunity to interference | per EN 61000-6-2, marine applications |
| EMC emission of interference | per EN 61000-6-4, marine applications |
| Exposure to pollutants | per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 % | 10 ppm |
| Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 % | 25 ppm |
Commercial data
| Product Group | 15 (I/O System) |
| PU (SPU) | 1 pcs |
| Packaging type | Box |
| Country of origin | DE |
| GTIN | 4045454396145 |
| Customs tariff number | 85389091890 |
Product Classification
| UNSPSC | 39121410 |
| eCl@ss 10.0 | 27-24-26-10 |
| eCl@ss 9.0 | 27-24-26-10 |
| ETIM 9.0 | EC001600 |
| ETIM 10.0 | EC001600 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| CAS-No. | 1303-86-2, 1317-36-8, 25550-51-0, 7439-92-1 |
| REACH Candidate List Substance | 4-Methyl-1,2-cyclohexanedicarboxylic anhydride, Diboron trioxide, Lead, Lead monoxide |
| RoHS Compliance Status | Compliant,With Exemption |
| RoHS Exemption | 6(c), 7(a), 7(c)-I, 7(c)-II |
| SCIP notification number (Austria) | c36715f9-5c40-41b2-adf9-d5957c44da13 |
| SCIP notification number (Belgium) | 7e462ec9-8afd-4ffc-9932-6854fcd510a6 |
| SCIP notification number (Bulgaria) | de728fff-7a8a-4dcd-8891-55bae0a63909 |
| SCIP notification number (Czech Republic) | 50cc0f06-c64f-4a3e-bf92-7a40111c4ce1 |
| SCIP notification number (Denmark) | a7f1d4c1-2846-43c0-bfd9-d82b326af59e |
| SCIP notification number (Finland) | 44ebb0bc-0a17-4c46-b729-113c8d64ee89 |
| SCIP notification number (France) | 74e9db25-dd06-4112-9f35-29e00223c6ba |
| SCIP notification number (Germany) | dc722b39-d957-4e52-8057-659aa749f781 |
| SCIP notification number (Hungary) | 1455ff80-7191-4e7f-925a-63e8343ec057 |
| SCIP notification number (Italy) | 29a07005-72c3-4ce2-a464-d2090052f491 |
| SCIP notification number (Netherlands) | 21bc08b9-1085-414a-8c57-a8f10f34963d |
| SCIP notification number (Poland) | e57d7b40-2b74-4f28-8f1c-71c9513157b9 |
| SCIP notification number (Romania) | 746c698b-617d-4240-9693-6e64d1028b5e |
| SCIP notification number (Sweden) | 388144aa-fc99-428d-8470-2d262bdfb9a2 |
