RS-232/485 Serial Interface
Richiedi un preventivo
In breve
| Disponibilità | Conferma su richiesta |
| Categoria | I/O Systems |
| Ciclo di vita | active |
| Garanzia | 12 mesi (nuovo) · 3 mesi (usato/rigenerato) |
Spedizione e disponibilità
Quando può essere spedito 750-1652?
750-1652 viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.
Posso ritirare 750-1652 di persona?
Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.
È disponibile la consegna espressa?
Sì — menzionalo nella richiesta di preventivo per 750-1652 e includeremo le opzioni di spedizione espressa nella nostra risposta.
Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?
In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per 750-1652, in base a disponibilità e destinazione.
<p>This serial interface module connects RS-485, RS-422 or RS-232 interface devices (optional) to the WAGO I/O System 750/753. It also allows gateways to be implemented between the fieldbuses supported by the WAGO I/O System 750/753 and a serial interface. No higher protocol level is required by the module. Communication to the associated fieldbus master is completely transparent, which provides a wide range of applications for the serial interface module. If required, communication protocols can be configured via fieldbus master.</p><p>The 8192-byte input buffer provides high data baud rates. At lower baud rates, the data received in lower priority tasks is evaluated without data loss.</p><p>The 2048-byte output buffer provides fast transmission of larger data strings.</p><p>The module can be freely configured via WAGO-I/O-<i>CHECK</i>, <b><i>e!</i></b><i>COCKPIT</i> or GSD files. Both flexible baud rate and data width selection perfectly adapt to the application. It is not suitable for applications under CODESYS 2.3.</p><p>The module has a switchable terminating resistor for impedance matching.</p><p>In addition, the module provides a two-stage switchable bias network for level adjustment of the receiver inputs. This eliminates the need for an external terminating resistor and, in many cases, for an external bias network.</p>
Specifiche
Technical data
| Signal type | RS-232, RS-422 / RS-485 |
| Transmission rate | 150 Bd … 250 kBd |
| Bit transfer | RS-485/-422: ISO 8482 / DIN 66259 - 4; RS-232: EIA/TIA-232-F |
| Transmission channels | 1 TxD / 1 RxD, full-duplex, half-duplex |
| Line length | RS-485/-422: approx. 1000 m (max.) twisted pair, RS-232: 40 m (max.) |
| Level adjustment | Bias network 1 approx. 620 Ω (switchable); bias network 2 approx. 1210 Ω (switchable) |
| Data width | Serial operating modes: 1 x 46/1 x 22/1 x 6-byte input/output (parameterizable), 2-byte control/status |
| Terminating resistor | Approx. 120 Ohm (switchable) |
| Parity | None/Odd/Even/Mark/Space |
| Number of data bits | 7 … 8, adjustable |
| Number of stop bits | 1/2, adjustable |
| Buffer | 8192-byte input / 2048-byte output |
| Supply voltage (system) | 5 VDC; via data contacts |
| Current consumption (5 V system supply) | 120 mA |
| Current consumption (note) | 120 mA at RS-232, Xon/Xoff 115.2 kBaud; 90 mA at RS-485 full-duplex 115.2 kBaud |
| Supply voltage (field) | 24 VDC; via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact) |
| Isolation | 500 V system/field |
| Indicators | LED (A-H) green/yellow/red: function, TxD (send), RxD (receive), buffer status, 3 x operating mode, data flow control |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
| Current carrying capacity (power jumper contacts) | 10 A |
Connection data
| Connection technology: I/O | 8 x CAGE CLAMP® |
| Connectable conductor materials | Copper |
| Connection type | Inputs/outputs |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
| Width | 12 mm / 0.472 inches |
| Height | 100 mm / 3.937 inches |
| Depth | 67.8 mm / 2.669 inches |
| Depth from upper-edge of DIN-rail | 60.6 mm / 2.386 inches |
Mechanical data
| Mounting type | DIN-35 rail |
| Pluggable connector | fixed |
Material data
| Housing material | Polycarbonate; polyamide 6.6 |
| Fire load | 0.713 MJ |
| Weight | 53.3 g |
| Conformity marking | CE |
Environmental requirements
| Ambient temperature (operation) | 0 … +55 °C |
| Ambient temperature (storage) | -40 … +85 °C |
| Protection type | IP20 |
| Pollution degree | 2 per IEC 61131-2 |
| Operating altitude | 0 … 2000 m / 0 … 6562 ft |
| Mounting position | Horizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom |
| Relative humidity (without condensation) | 95 % |
| Vibration resistance | 4g per IEC 60068-2-6 |
| Shock resistance | 15g per IEC 60068-2-27 |
| EMC immunity to interference | per EN 61000-6-2, marine applications |
| EMC emission of interference | per EN 61000-6-3, marine applications |
| Exposure to pollutants | per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 % | 10 ppm |
| Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 % | 25 ppm |
Commercial data
| PU (SPU) | 1 pcs |
| Packaging type | Box |
| Country of origin | DE |
| GTIN | 4066966371253 |
| Customs tariff number | 85389099990 |
Product Classification
| UNSPSC | 32101517 |
| ETIM 9.0 | EC001604 |
| ETIM 10.0 | EC001604 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| CAS-No. | 7439-92-1, 1303-86-2, 1317-36-8, 693-98-1, 7439-92-1 |
| REACH Candidate List Substance | Diboron trioxide, Lead, Lead monoxide, 2-methylimidazole, Diboron trioxide, Lead, Lead monoxide |
| RoHS Compliance Status | Compliant,With Exemption |
| RoHS Exemption | 7(c)-I, 6(c), 7(a), 7(c)-I, 7(c)-II |
| SCIP notification number (Austria) | a78b29be-4883-45a2-a1de-fa0d374dfa62 |
| SCIP notification number (Belgium) | ac2eb67e-85bb-41e4-ae51-164544d79105 |
| SCIP notification number (Bulgaria) | 0d81b52f-b65b-4b44-9db5-deff700c1ca8 |
| SCIP notification number (Czech Republic) | 4cc20f41-5e3a-4596-9503-896739d0e2b0 |
| SCIP notification number (Denmark) | bc98fe69-7024-4844-abf5-b282da07430a |
| SCIP notification number (Finland) | 1832355f-9395-4004-b51b-90bb37a942ef |
| SCIP notification number (France) | eb9b2269-a5c0-4a6c-a33b-947a60a22d7d |
| SCIP notification number (Germany) | dfd08081-39ba-4304-9102-8f82a16471e8 |
| SCIP notification number (Hungary) | 6efba538-bfa4-4df8-beca-09400b6a846c |
| SCIP notification number (Italy) | 80140f7a-00bb-4b7a-a0a9-20ee8acb6788 |
| SCIP notification number (Netherlands) | 7706470d-a5d8-4842-af0c-a37372428f85 |
| SCIP notification number (Poland) | 7f9b5780-290e-4213-8579-df22283270a7 |
| SCIP notification number (Romania) | 8a7d8abc-7b7b-4c10-b7fc-aeafb81c26af |
| SCIP notification number (Sweden) | 4027092b-72dd-44a2-a6d3-bbc7d21ddaee |
