modular single phase power meter iEM2050 - 230V - 45A with communication Modbus
Richiedi un preventivo
In breve
| Disponibilità | Conferma su richiesta |
| Categoria | Acti9 iEM2000 Energy Meters |
| Ciclo di vita | active |
| Garanzia | 12 mesi (nuovo) · 3 mesi (usato/rigenerato) |
| Peso | 85 kg |
Spedizione e disponibilità
Quando può essere spedito A9MEM2050?
A9MEM2050 viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.
Posso ritirare A9MEM2050 di persona?
Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.
È disponibile la consegna espressa?
Sì — menzionalo nella richiesta di preventivo per A9MEM2050 e includeremo le opzioni di spedizione espressa nella nostra risposta.
Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?
In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per A9MEM2050, in base a disponibilità e destinazione.
The Acti9 iEM2100 series energy meters offer is a single-phase DIN rail-mounted energy meters fitted for basic metering. This product family can be used to monitor power consumption for each sector, unit or workshop and manage electrical installation for building management. It feature a 8-character LCD display and red LED indicator to display measured electrical parameters. Providing Class 1 active energy accuracy per IEC 62053-21 standard, the meter will measure Active and Reactive Power, Active and Reactive Energy, Voltage and Current. Suitable for a 230VAC network, with a supply voltage range of 96 to 276 VAC at 50Hz or 60Hz. Direct connect current measurement up to 63A with 32 samples per cycle only in a Single Phase and Neutral configuration. Communication protocol is Modbus RTU with 3 wire terminal support, no additional communication ports. Product dimensions are as follows: width 36 mm, depth 64 mm, height 90 mm and product weight 175 g. Compatible with power management software to take advantage of the IoT digital power installation.
Specifiche
Specifications
| Range | Acti9 |
| family | Acti9 iEM2000 |
| Product or component type | Energy meter |
| Device short name | iEM2050 |
| Poles description | 1P + N |
| Type of measurement | Active energy, Active and reactive power, Power factor, Current, Voltage, Frequency, Apparent power |
| Metering type | Active energy (signed, two quadrant) |
| Device application | Sub billing, Multi-tariff |
| Accuracy class | Class 1 active energy conforming to IEC 62053-21 |
| Analogue input type | Direct input |
| Maximum current [Imax] | 45 A |
| [Ib] basic current | 5 A |
| Rated current | 45 A |
| Rated voltage | 230 V |
| Network frequency | 50 Hz, 60 Hz |
| Frequency measurement range | 45…66 Hz |
| Technology type | Electronic |
| Display type | LCD display |
| Sampling rate | 32 samples/cycle |
| Measurement current | 0.25…45 A |
| Display digits | 6 |
| Maximum value measured | 9999.99 kWh, 99999.9 kWh |
| Information displayed | Tariff (2) |
| Communication port protocol | Modbus RTU at 1200...9600 bit/s even/odd or none |
| Communication port support | Screw terminals: RS485 |
| Local signalling | Red LED: metering and activity 10000, 2000, 1000, 100, 10, 1, 0.1 or 0.01 imp/kWh |
| Number of outputs | 1 pulse energy monitoring: |
| Impulse duration | 11.2...32 ms |
| [Us] rated supply voltage | 195...253 V AC |
| Maximum power consumption in VA | 10 VA at 240 V AC |
| Maximum power consumption in W | 2 W per phase |
| [Uimp] rated impulse withstand voltage | 6 kV 1.2/50 µs |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Connections - terminals | Power circuit: tunnel type terminals (bottom) 8…10 mm² cable(s), Power circuit: tunnel type terminals (top) 8…10 mm² cable(s), Pulse output: screw clamp terminals (top) 2.5 mm² cable(s), Communication: screw clamp terminals (bottom) 2.5 mm² cable(s) |
| Tightening torque | Power circuit: 0.35 N.m flat screwdriver 2.2 mm, Pulse output: 0.1 N.m flat screwdriver 1.3 mm, Communication: 0.1 N.m flat screwdriver 1.3 mm |
| Wire stripping length | Power circuit: 7.5 mm, Pulse output: 7 mm, Communication: 7 mm |
| Standards | IEC 62053-21, IEC 62053-23 |
| Product certifications | CE |
| IP degree of protection | IP51 front panel: conforming to IEC 60529, IP20 casing: |
| Ambient air temperature for operation | -40…70 °C |
| Ambient air temperature for storage | -40…80 °C |
| Operating altitude | < 2000 m |
| Relative humidity | 0…75 % operation, 0…95 % storage |
| Colour | White |
| 9 mm pitches | 2 |
| Width | 17.5 mm |
| Height | 90 mm |
| Depth | 63 mm |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 6.800 cm |
| Package 1 Width | 2.000 cm |
| Package 1 Length | 10.000 cm |
| Package 1 Weight | 85.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 10 |
| Package 2 Height | 7.800 cm |
| Package 2 Width | 11.000 cm |
| Package 2 Length | 22.000 cm |
| Package 2 Weight | 912.000 g |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 60 |
| Package 3 Height | 30.000 cm |
| Package 3 Width | 30.000 cm |
| Package 3 Length | 40.000 cm |
| Package 3 Weight | 5.560 kg |
| Warranty (in months) | 18 |
Altri componenti Schneider Electric
UsatoSchneider Electric Tac xenta-401 Used
NuovoSchneider Electric LC1D80AKUE New open box
NuovoSchneider Electric A9F94101 New without box