Pepperl Fuchs KFD0-SD2-Ex2.1245

Solenoid Driver. 2-channel isolated barrier, 24 V DC supply (loop powered), Current limit 45 mA at 12 V DC, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 2-channel, Safety Integrity Level (SIL): SIL 3, Rated voltage: 20 ... 35 V DC , loop powered, Type: field device supply, Field device: 2 x Valve, Field device [2]: 2 x audible alarm, Field device [3]: 2 x visual alarm, Current: ≤ 45 mA, Voltage: ≥ 12 V. Signal type: Digital Output. Safety Integrity Level (SIL): SIL 3. Rated voltage: 20 ... 35 V DC , loop powered. Power dissipation: < 1 W (≤ 30 V) per channel. Connection side: control side. Connection: terminals 7, 8; 8, 9. Rated voltage: 20 ... 35 V DC. Current: 72 mA at 20 V input voltage, load = 265 Ω 50 mA at 35 V input voltage, load = 265 Ω. Inrush current: ≤ 200 mA after 100 µs. Connection side: field side. Connection: terminals 1+, 2-; 4+, 5-. Internal resistor: max. 238 Ω. Current: ≤ 45 mA. Voltage: ≥ 12 V. Open loop voltage: min. 22.7 V. Output current: 45 mA. Output signal: These values are valid for the rated operating voltage 20 ... 35 V DC.. Energized/De-energized delay: single operation: typ. 1.7 ms/50 µs; periodical: typ. 5 µs/50 µs. Display elements: LEDs. Labeling: space for labeling at the front. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Electromagnetic compatibility: NE 21:2006. Degree of protection: IEC 60529:2001. Protection against electrical shock: UL 61010-1:2004. Ambient temperature: -20 ... 60 °C (-4 ... 140 °F). Degree of protection: IP20. Connection: screw terminals. Mass: approx. 100 g. Dimensions: 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1. Height107 mmWidth20 mmDepth115 mm: . Height: 107 mm. Width: 20 mm. Depth: 115 mm. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. EU-type examination certificate: BASEEFA 06 ATEX 0252. Marking II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] IVoltageUo25.2 VCurrentIo110 mAPowerPo693 mW: . Marking: II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I. Voltage: 25.2 V. Current: 110 mA. Power: 693 mW. Input: . Maximum safe voltageUm250 V (Attention! The rated voltage can be lower.): Um. Maximum safe voltage: 250 V (Attention! The rated voltage can be lower.). Certificate: TÜV 99 ATEX 1499 X. Marking II 3G Ex nA II T4: . Marking: II 3G Ex nA II T4. Galvanic isolation: . Input/Outputsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V: . Input/Output: safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V. Directive conformity: . Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010: . Directive 2014/34/EU: EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010. FM approval: . Control drawing116-0309: . Control drawing: 116-0309. UL approval: E106378. Control drawing116-0316 (cULus): . Control drawing: 116-0316 (cULus). IECEx approval: . IECEx certificateIECEx BAS 06.0058 IECEx CML 19.0093XIECEx marking[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc: . IECEx certificate: IECEx BAS 06.0058 IECEx CML 19.0093X. IECEx marking: [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Specifiche