Home / IFM / IFM SMF150

Disponibile su richiesta

IFM SMF150

Name: IFM SMF150
Brand: IFM
SKU: SMF150

Codice: SMF150 · Marchio: IFM

Prezzo su richiesta

Richiedi un preventivo

Garanzia di 12 mesi (nuovo) · 3 mesi (usato/rigenerato)

Reso entro 30 giorni, nessuna commissione di riassortimento sui pezzi non utilizzati

Spedito tramite

In breve

Disponibilità	Conferma su richiesta
Categoria	Magnetic-inductive volumetric flow meters
Garanzia	12 mesi (nuovo) · 3 mesi (usato/rigenerato)

Spedizione e disponibilità

Quando può essere spedito SMF150?

SMF150 viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.

Posso ritirare SMF150 di persona?

Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.

È disponibile la consegna espressa?

Sì — menzionalo nella richiesta di preventivo per SMF150 e includeremo le opzioni di spedizione espressa nella nostra risposta.

Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?

In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per SMF150, in base a disponibilità e destinazione.

Magnetic-inductive flow meter (SM Foodmag series) for the food and beverage industry Measured variables: flow rate, total volume, temperature, conductivity and fluid detection Reduced cabling by combining supply voltage and output signals via an M12 connection Housing design increases shock and vibration resistance User-friendly communication and parameterisation via IO-Link

Specifiche

Product characteristics

Measuring range	1...100 l/min; 0.06...6 m³/h; 0.26...26.41 gpm; 0.31...30.94 ft/s
1...100 l/min	0.06...6 m³/h
Nominal diameter	DN15 (1/2“)
Process connection	ifm-specific device flange

Application

Special feature	Gold-plated contacts
Application	food and beverage industry
Media	conductive liquids; water; hydrous media
Note on media	food products such as beer, milk, fruit juices, soft drinks, ketchup, yoghurt, yoghurt toppings, ice cream; conductivity: ≥ 5 µS/cm
Medium temperature[°C] [°C]	-20...150
Min. burst pressure	60 bar; 870 psi; 6 MPa
60 bar	870 psi
Pressure rating	40 bar; 580.1 psi; 4 MPa
40 bar	580.1 psi

Electrical data

Operating voltage[V] [V]	18...32 DC
Current consumption[mA] [mA]	250; (24V)
Protection class	III
Reverse polarity protection	yes
Power-on delay time[s] [s]	< 5
Measuring principle	magnetic-inductive

Inputs / outputs

Total number of inputs and outputs

Inputs

Inputs	OUT2; external totaliser reset
OUT2	external totaliser reset

Outputs

Total number of outputs	2
Output signal	OUT1; pulse signal; totaliser switching signal; diagnostic signal; IO-Link; OUT2; analogue signal; pulse signal; totaliser switching signal; diagnostic signal
OUT1	pulse signal; totaliser switching signal; diagnostic signal; IO-Link
OUT2	analogue signal; pulse signal; totaliser switching signal; diagnostic signal
Electrical design	PNP/NPN
Pulse output	flow rate meter
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes
Number of analogue outputs	1
Analogue current output[mA] [mA]	4...20; (skalierbar)
Max. load[Ω] [Ω]	500
Resolution of analogue output	0.38 µA
Number of digital outputs	2
Max. voltage drop switching output DC[V] [V]	2
Permanent current rating of switching output DC[mA] [mA]	100
Switching frequency DC[Hz] [Hz]	0...10000

Measuring/setting range

Measuring range	-20...150 °C; -4...302 °F
1...100 l/min	0.06...6 m³/h
Note on factory setting	0...2,0 m³/h
Analogue start point ASP	-100...80 l/min; -6...4.8 m³/h; -26.41...21.13 gpm; -30.94...24.75 ft/s
-100...80 l/min	-6...4.8 m³/h
Analogue end point AEP	-80...100 l/min; -4.8...6 m³/h; -21.13...26.41 gpm; -24.75...30.94 ft/s
-80...100 l/min	-4.8...6 m³/h
Low flow cut-off LFC	0...80 l/min; 0...4.8 m³/h; 0...21.13 gpm; 0...24.75 ft/s
0...80 l/min	0...4.8 m³/h
Pulse length[s] [s]	0.00005...2
Pulse value	0.001...99999000 I
-20...150 °C	-4...302 °F
Analogue start point	-20...116 °C; -4...240.8 °F
-20...116 °C	-4...240.8 °F
Analogue end point	14...150 °C; 57.2...302 °F
14...150 °C	57.2...302 °F
Measuring range[µS/cm] [µS/cm]	100...100000
Analogue start point[µS/cm] [µS/cm]	0...80000
Analogue end point[µS/cm] [µS/cm]	20000...100000

Accuracy / deviations

Accuracy (under reference conditions)	with optional factory calibration (availability is being planned); ± (0,2 % MW + 2 mm/s); standard; ± (0,5 % MW + 1,5 mm/s)
with optional factory calibration (availability is being planned)	± (0,2 % MW + 2 mm/s)
standard	± (0,5 % MW + 1,5 mm/s)
Repeatability	± 5% MW
Accuracy[K] [K]	± 1
Repeatability[K] [K]	± 0,5
Accuracy (in the measuring range)	in the range of 100...20000 µS/cm; ±10% MW; in the range of 20000...100000 µS/cm; ±20% MW
in the range of 100...20000 µS/cm	±10% MW
in the range of 20000...100000 µS/cm	±20% MW

Response times

Response time[s] [s]	< 2
Damping process value dAP[s] [s]	0...5

Software / programming

Diagnostic functions

direction of flow detection; liquid detection

Interfaces

Communication interface	IO-Link
IO-Link revision	1.1.3
SDCI standard	IEC 61131-9
SIO mode	yes
Required master port type	A
Process data analogue	6
Process data binary	8
IO-Link process data (cyclical)	totaliser; 32; flow; 32; temperature; 32; conductivity; 32; status; 4; binary switching information; 8
totaliser	32
flow	32
temperature	32
conductivity	32
status	4
binary switching information	8
IO-Link functions (acyclical)	direction of flow detection; totaliser; memory; operating hours counter; internal temperature; simulation function
Supported DeviceIDs	default; 1785
default	1785

Operating conditions

Ambient temperature	-20...65 °C; -4...149 °F
-20...65 °C	-4...149 °F
Storage temperature	-20...80 °C; -4...176 °F
-20...80 °C	-4...176 °F
Protection	IP 67; IP 69; (to DIN EN 60529)

Tests / approvals

EMC	DIN 61326-1
CPA approval	model number; SMF; accuracy class; 0,5
model number	SMF
accuracy class	0,5
Shock resistance	DIN IEC 68-2-27; 20 g (18ms)
DIN IEC 68-2-27	20 g (18ms)
Vibration resistance	DIN IEC 68-2-6; 5 g (10...2000Hz)
DIN IEC 68-2-6	5 g (10...2000Hz)
MTTF[years] [years]	82
Pressure Equipment Directive	Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical data

Weight[g] [g]	3604
Housing	cylindrical
Inlet pipe length	5 x DN
Outlet pipe length	2 x DN
Dimensions[mm] [mm]	Ø 114.3 / L = 86
Materials	housing: stainless steel (316L/1.4404); flange: stainless steel (304/1.4301); electronics fixture: stainless steel (304/1.4301); electronics: stainless steel (316L/1.4404); LED ring: PP
Materials (wetted parts)	Pipe section: PFA; electrodes: stainless steel (316L/1.4435)
Nominal diameter	DN15 (1/2“)
Process connection	ifm-specific device flange
Surface characteristics Ra/Rz of the wetted parts	Ra < 0.4 μm

Displays / operating elements

Display	operating status; LED ring, three-colour
operating status	LED ring, three-colour
Factory setting	m³/h; °C; μS/cm

Remarks

MW = measured value; MEW = Final value of the measuring range; pulse and totaliser signal are only available for one of the two outputs; reference conditions (1/2): water (free of gas bubbles), 15...35 °C, process connection: DIN32676 series A, pipe standard suitable for process connection; reference conditions (2/2): inlet pipe length 10xDN, outlet pipe length 5xDN, device settling time: 30 minutes, device orientation: horizontal, display orientation: up; accuracy specifications according to factory certificate on delivery

Pack quantity

1 pcs.