IFM LI5133
Richiedi un preventivo
In breve
| Disponibilità | Conferma su richiesta |
| Categoria | Use in applications with coolants, cleaning agents and lubricants as well as hydraulic oils |
| Garanzia | 12 mesi (nuovo) · 3 mesi (usato/rigenerato) |
Spedizione e disponibilità
Quando può essere spedito LI5133?
LI5133 viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.
Posso ritirare LI5133 di persona?
Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.
È disponibile la consegna espressa?
Sì — menzionalo nella richiesta di preventivo per LI5133 e includeremo le opzioni di spedizione espressa nella nostra risposta.
Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?
In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per LI5133, in base a disponibilità e destinazione.
For the reliable point level monitoring in tanks and containers Detection of minimum level, leakage or overflow of tanks Simple empty or full adjustment Suitable for water, oils and coolants User-friendly setting of the requested immersion depth of the sensor Integrated temperature measurement via IO-Link
Specifiche
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2 |
| Factory setting | hydrous media |
| Probe length L[mm] [mm] | 481 |
Application
| Special feature | Gold-plated contacts |
| Media | Liquids |
| Dielectric constant of the medium | > 1,8 |
| Recommended media | water; hydrous media; oils; oil-based media |
| Cannot be used for | See operating instructions, chapter "Intended use". |
| Medium temperature[°C] [°C] | -25...85 |
| Pressure rating | 0.5 bar; 0.05 MPa |
| 0.5 bar | 0.05 MPa |
| Vacuum resistance[mbar] [mbar] | -500 |
Electrical data
| Operating voltage[V] [V] | 9.6...35 DC; (IO-Link: 18...30 DC) |
| Current consumption[mA] [mA] | < 15 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | < 1 |
| Measuring principle | capacitive |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2 |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; IO-Link |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2.5 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Factory setting | hydrous media |
| Probe length L[mm] [mm] | 481 |
| Active range A[mm] [mm] | 28 |
| Measuring range[°C] [°C] | -25...85 |
Accuracy / deviations
| Accuracy[K] [K] | 1,5 |
| Resolution[K] [K] | 0.1 |
| Dynamic response T09[s] [s] | 240 |
Response times
| Response time[s] [s] | < 0.3 |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Common - I&D; Identification and Diagnosis; Function; Measurement data, standard resolution |
| Common - I&D | Identification and Diagnosis |
| Function | Measurement data, standard resolution |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 5 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 4.5 |
| Supported DeviceIDs | default; 1053 |
| default | 1053 |
Operating conditions
| Ambient temperature[°C] [°C] | -25...85 |
| Storage temperature[°C] [°C] | -25...85 |
| Protection | IP 68; IP 69K; (7 days / 3 m water depth / 0.3 bar: IP 68) |
Tests / approvals
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3; in a closed metal tank; DIN EN 61000-6-4; in plastic or open metal tanks |
| DIN EN 61000-6-3 | in a closed metal tank |
| DIN EN 61000-6-4 | in plastic or open metal tanks |
| Shock resistance | DIN EN 60068-2-27; 12 g (11 ms) |
| DIN EN 60068-2-27 | 12 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6; 5 g (10...2000 Hz) |
| DIN EN 60068-2-6 | 5 g (10...2000 Hz) |
| MTTF[years] [years] | 433 |
| UL approval | UL approval no.; H013; File number UL; E174191 |
| UL approval no. | H013 |
| File number UL | E174191 |
Mechanical data
| Weight[g] [g] | 370.35 |
| Materials | PP reinforced fibre |
| Materials (wetted parts) | PP |
| Probe diameter[mm] [mm] | 16 |
Displays / operating elements
| Display | operation; LED, green; switching status; LED, yellow |
| operation | LED, green |
| switching status | LED, yellow |
| Operating elements | inductive programming button |
Remarks
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
