ISO cylinder-DSBG-...-200- -
Richiedi un preventivo
In breve
| Disponibilità | Conferma su richiesta |
| Categoria | DSBG |
| Ciclo di vita | active |
| Garanzia | 12 mesi (nuovo) · 3 mesi (usato/rigenerato) |
Spedizione e disponibilità
Quando può essere spedito DSBG-...-200- -?
DSBG-...-200- - viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.
Posso ritirare DSBG-...-200- - di persona?
Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.
È disponibile la consegna espressa?
Sì — menzionalo nella richiesta di preventivo per DSBG-...-200- - e includeremo le opzioni di spedizione espressa nella nostra risposta.
Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?
In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per DSBG-...-200- -, in base a disponibilità e destinazione.
ISO 15552 (ISO 6431, VDMA 24562) , Sturdy tie rod design , Self-adjusting pneumatic end-position cushioning saves time during commissioning and adapts optimally to load and speed changes , Comprehensive range of mounting accessories for just about every type of installation , For position sensing , Sustainable thanks to extended life cycle and easier repairs
Specifiche
Specifications
| Stroke | 1, 2700 mm |
| Piston diameter | 200 mm |
| Piston rod thread | M36x2, M36, M30x2, M27x2, M27, M24, M20x1.5, M20 |
| Based on standard | ISO 15552 |
| Cushioning | Elastic cushioning rings/plates at both ends, Pneumatic cushioning, adjustable at both ends |
| Mounting position | optional |
| Conforms to standard | ISO 15552 |
| Piston-rod end | Male thread, Female thread |
| Design | Piston, Piston rod, Tie rod, Cylinder barrel |
| Position detection | Via proximity switch |
| Symbol | 00991217, 00991218, 00991235, 00991237 |
| Variants | Extended male piston rod thread, Piston rod with female thread, Custom thread on the piston rod, Extended piston rod, Metal scraper, High corrosion protection, Through piston rod, Heat-resistant seals max. 120°C, Clamped swivel mounting position, Screwed-on swivel mounting position, Spacer bolt on end cap side, Spacer bolt on both sides, Spacer bolt on bearing cap side, Variable spacer bolt length, Temperature range 0 to 150°C, Shortened male piston rod thread, Piston rod at one end, For proximity switch |
| Operating pressure | 0.6, 10 bar |
| Mode of operation | Double-acting |
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) |
| Explosion protection | Zone 1 (ATEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 22 (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | c T4 |
| Explosion ignition protection type for dust | c T120°C |
| Explosion ambient temperature | -20°C <= Ta <= +60°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress, 3 - high corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L, VDMA24364 zone III |
| Ambient temperature | -20, 150 °C |
| Impact energy in end positions | 4, 4.8 J |
| Cushioning length | 48 mm |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 18096 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 18096, 18850 N |
| Pneumatic connection | G3/4 |
| Note on materials | RoHS-compliant |
| Material cover | Cast aluminium, coated |
| Material piston seal | FPM, NBR |
| Material piston | Cast aluminium |
| Material piston rod | High-alloy stainless steel, hard chrome-plated, High-alloy steel, High-alloy stainless steel |
| Material piston rod wiper | FPM, NBR |
| Buffer seal material | FPM, TPE-U(PU) |
| Material of cushioning boss | Wrought aluminium alloy, POM |
| Material cylinder barrel | Smooth-anodised wrought aluminium alloy |
| Material nut | Galvanised steel, High-alloy stainless steel |
| Material rod wiper | Brass |
| Material bearing | Bronze, Metal polymer compound |
| Material collar nut | Galvanised steel |
| Material tie rod | High-alloy steel, High-alloy stainless steel |
| Material spacer bolt | High-alloy steel, High-alloy stainless steel |
| Material swivel mounting | Painted spheroidal graphite cast iron |
Altri componenti Festo
Disponibile su richiestaPush-in connector-NPQP-D-Q6-S8-FD-P10
Disponibile su richiestaPush-in T-fitting-NPQE-LT-R18-Q4-P10