B&R 8V128M.001-2
Richiedi un preventivo
In breve
| Disponibilità | Conferma su richiesta |
| Categoria | Servo drives |
| Ciclo di vita | active |
| Garanzia | 12 mesi (nuovo) · 3 mesi (usato/rigenerato) |
| Peso | 33.8 kg |
Spedizione e disponibilità
Quando può essere spedito 8V128M.001-2?
8V128M.001-2 viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.
Posso ritirare 8V128M.001-2 di persona?
Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.
È disponibile la consegna espressa?
Sì — menzionalo nella richiesta di preventivo per 8V128M.001-2 e includeremo le opzioni di spedizione espressa nella nostra risposta.
Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?
In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per 8V128M.001-2, in base a disponibilità e destinazione.
Modular mechanical design using plug-in modulesIntegrated line filterIntegrated or optional external braking resistorIntegrated electronic restart inhibitPartially-coated circuit boards - more robust in regard to environmental influences (8Vxxxx.001-2) ACOPOS servo drive, 3x 400-480 V, 128 A, 64 kW, coated, integrated line filter, braking resistor, DC bus power supply unit and electronic safe restart interlock
Specifiche
Specifications
| Note | Variant with partially coated printed circuit boards |
| B&R ID code | 0xA09D |
| Slots for plug-in modules | 4 |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | Evaluation ongoing |
| Functional safety | Yes |
| UL | cULus E225616 Power conversion equipment |
| KC | Yes |
| Permissible network configurations | TT, TN |
| Mains input voltage | 3x 400 VAC to 480 VAC ±10% |
| Frequency | 50 / 60 Hz ±4% |
| Installed load | Max. 98 kVA |
| Inrush current at 400 VAC | 26 A |
| Switch-on interval | >10 s |
| Integrated line filter per EN 61800-3, category C3 | Yes |
| Power dissipation at device nominal power without braking resistor | Approx. 3200 W |
| DC bus capacitance | 6600 µF |
| Input voltage | 24 VDC +25% / -20% |
| Input capacitance | 32,800 µF |
| Mains input voltage applied | 22 to 24 VDC |
| Mains input voltage not applied | 16.7 to 30 VDC |
| Switch-on voltage | 455 VDC |
| Output current | Max. 0.5 A |
| Quantity | 2 |
| Continuous current | 128 Aeff |
| Switching frequency 5 kHz | No reduction |
| Switching frequency 10 kHz | 1.65 Aeff per °C (starting at 36°C) |
| Switching frequency 20 kHz | 1.65 Aeff per °C (starting at 10°C) |
| Starting at 500 m above sea level | 12.8 Aeff per 1000 m |
| Peak current | 300 Aeff |
| Nominal switching frequency | 5 kHz |
| Possible switching frequencies | 5 / 10 / 20 kHz |
| Insulation stress of the connected motor per IEC TS 60034-25:2004 | Limit value curve A |
| Max. motor line length | 25 m |
| Overload protection | Yes |
| Short-circuit and ground fault protection | Yes |
| Max. output frequency | 598 Hz |
| With wire end sleeve | 10 to 70 mm² |
| UL/C-UL-US | 6 to 2/0 AWG |
| CSA | 6 to 2/0 AWG |
| Response threshold for open-circuit monitoring | Approx. 210 mA |
| Max. output current | 3 A |
| Max. number of switching cycles | Approx. 80,000 |
| Peak power int./ext. | 8.5 / 250 kW |
| Continuous power int./ext. | 0.24 / 24 kW |
| Minimum braking resistance (ext.) | 2.5 Ω |
| Rated current of built-in fuse | 30 A (fast-acting) |
| Circuit | Sink |
| Input - ACOPOS | Yes |
| Input - Input | No |
| Nominal | 5 to 40°C |
| Maximum | 55°C |
| Low | <5 V |
| High | >15 V |
| Input current at nominal voltage | Approx. 10 mA |
| Switching delay | Max. 2.0 ms |
| Modulation compared to ground potential | Max. ±38 V |
| Enable 0 → 1, ready for PWM | Max. 100 µs |
| Enable 1 → 0, PWM off | Max. 2.0 ms |
| OSSD signal connections | Not permitted |
| Rising edge | 52 µs ±0.5 µs (digitally filtered) |
| Falling edge | 53 µs ±0.5 µs (digitally filtered) |
| Discharge capacitance | 5.4 µF |
| Power dissipation relative to continuous apparent power | IE2 (10,25) 0.7% IE2 (50,25) 0.8% IE2 (10,50) 0.9% IE2 (50,50) 1% IE2 (90,50) 1.2% IE2 (10,100) 1.6% IE2 (50,100) 1.9% IE2 (90,100) 2.4% |
| Nominal losses in standby mode | 38.6 W |
| Hanging vertically | Yes |
| Horizontal, face up | Yes |
| Standing horizontally | No |
| Pollution degree per EN 61800-5-1 | 2 (non-conductive pollution) |
| Overvoltage category per EN 61800-5-1 | II |
| Degree of protection per EN 60529 | IP20 |
| Storage | 5 to 95% |
| Transport | Max. 95% at 40°C |
| Operation | 5 to 85% |
| Width | 402 mm |
| Height | 460 mm |
| Depth | 295 mm |
| Weight | 33.8 kg |
Altri componenti B&R
UsatoB&R 5C5001.01 IPC 5000 5D5500.06 Used
UsatoB&R 5PC720.1505-K07 - 5P62:0A-03 Used