COMPACT LINEAR BUSHING KBC-50-NR
Richiedi un preventivo
In breve
| Disponibilità | Conferma su richiesta |
| Categoria | Linear bushings |
| Ciclo di vita | active |
| Garanzia | 12 mesi (nuovo) · 3 mesi (usato/rigenerato) |
Spedizione e disponibilità
Quando può essere spedito R065805030?
R065805030 viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.
Posso ritirare R065805030 di persona?
Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.
È disponibile la consegna espressa?
Sì — menzionalo nella richiesta di preventivo per R065805030 e includeremo le opzioni di spedizione espressa nella nostra risposta.
Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?
In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per R065805030, in base a disponibilità e destinazione.
Compact linear bushing<br>Shaft diameter d = 50<br>Without seal<br>Radial clearance: Standard<br>Version: Rust-resistant<br>Not greased Low-cost linear bushing for general requirements Small outer dimensions and highly compact construction High dynamic load rating and long service life due to hardened segmental load-bearing plates with ball conformity in the running track Stainless steel for the medical, chemistry and food industries: Segmental load bearing plates comprising 1.4037 balls made from 1.3541 Integrated wiper seals, external seals or no wiper seals Normal radial clearance Not greased High travel speed (5 m/s) Simple mounting: Just press on – no additional retention needed Many pockets acting as lubricant reservoirs for extended lubrication intervals or lubrication for life Pockets collect any dirt that may have worked its way in to prevent the linear bushing from jamming. Integrated metal retainer about 0.1 mm larger than outer diameter (shaft diameters 12 to 50) for secure fit in housing bore
Specifiche
Specifications
| Shaft diameter d [mm] | 50.0 |
| Version | Corrosion-resistant |
| Format of linear bushings | – Closed |
| Series | Compact |
| Seal | Without wiper seals |
| Lubrication | Not lubricated |
| Maximum dynamic load capacity Cmax [N] | 5030.0 |
| Maximum acceleration rate amax [m/s²] | 150.0 |
| Maximum permissible linear speed vmax [m/s] | 5.0 |
| Radial clearance | normal radial clearance |
| Length of linear bushing [mm] | 70.0 |
| Outer diameter D [mm] | 62.0 |
| Permissible ambient temperature (min. ... max.) | -10 °C ... +80 °C |
| Friction coefficient μ | 0.001 ... 0.004 |
| Note: friction coefficient μ | Friction coefficients of unsealed linear bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. |
| Weight [kg] | 0.19 |
| Footnote breakaway force | One wiper seal: Multiply value with factor 0.5 |
| Footnote maximum dynamic load capacity Cmax | The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. |
| Footnote minimum dynamic load capacity Cmin | The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. |
| Footnote friction force FR | One wiper seal: Multiply value with factor 0.5 |
| Breakaway force [N] | 10 |
| Dimension C [mm] | 70 |
| Dimension D [mm] | 62 |
Altri componenti Bosch Rexroth
UsatoRexroth HCS03.1E-W0150-A-05-NNBV Used
UsatoRexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used