STANDARD LINEAR BUSHING KBM-E-60-D
Richiedi un preventivo
In breve
| Disponibilità | Conferma su richiesta |
| Categoria | Linear bushings |
| Ciclo di vita | active |
| Garanzia | 12 mesi (nuovo) · 3 mesi (usato/rigenerato) |
Spedizione e disponibilità
Quando può essere spedito R061106010?
R061106010 viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.
Posso ritirare R061106010 di persona?
Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.
È disponibile la consegna espressa?
Sì — menzionalo nella richiesta di preventivo per R061106010 e includeremo le opzioni di spedizione espressa nella nostra risposta.
Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?
In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per R061106010, in base a disponibilità e destinazione.
"standard linear bushing<br>Standard (metal)<br>Adjustable<br>Shaft diameter d = 60<br>With one seal<br>Version: Standard" Rugged all-metal design with steel ball retainer for harsh environments and heavy contamination Many pockets acting as lubricant reservoirs for extended lubrication intervals or lubrication for life Seal-free and with steel ball retainers for temperatures well above 80°C or under vacuum Radial clearance adjustable Integrated wiper seals for high contamination For use in woodworking, foundries, cement plants Pockets collect any dirt that may have worked its way in to prevent the linear bushing from jamming. No wiper seals, come with integrated steel retaining rings; higher temperatures allowed with shaft diameters 12 and higher Hardened and ground outer sleeve Steel ball retainer (shaft diameters 5 and 8 with plastic retainer made of PA) Balls made of rolling bearing steel
Specifiche
Specifications
| Shaft diameter d [mm] | 60.0 |
| Version | Standard |
| Format of linear bushings | E - Adjustable |
| Series | Standard (metal) |
| Type | Linear bushing |
| Seal | 1 integrated wiper seal |
| Lubrication | Not lubricated |
| Maximum dynamic load capacity Cmax [N] | 12100.0 |
| Maximum acceleration rate amax [m/s²] | 50.0 |
| Maximum permissible linear speed vmax [m/s] | 2.0 |
| Length of linear bushing [mm] | 125.0 |
| Outer diameter D [mm] | 90.0 |
| Permissible ambient temperature (min. ... max.) | -10 °C ... +80 °C |
| Note: permissible ambient temperature (min. ... max.) | Only unsealed linear bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity. |
| Friction coefficient μ | 0.001 ... 0.004 |
| Note: friction coefficient μ | Friction coefficients of unsealed linear bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. |
| Weight [kg] | 1.97 |
| Footnote breakaway force | One wiper seal: Multiply value with factor 0.5 |
| Footnote maximum dynamic load capacity Cmax | The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. |
| Footnote minimum dynamic load capacity Cmin | The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. |
| Footnote friction force FR | One wiper seal: Multiply value with factor 0.5 |
| Breakaway force [N] | 36 |
| Dimension C h12 [mm] | 125 |
| Dimension C1 H13 [mm] | 101.3 |
| Dimension C2 [mm] | 3.15 |
| Dimension D [mm] | 90 |
| Dimension D1 [mm] | 85 |
| Dimension E [mm] | 2 |
Altri componenti Bosch Rexroth
UsatoRexroth HCS03.1E-W0150-A-05-NNBV Used
UsatoRexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used