Home / Beckhoff / EtherCAT Terminal, 2-channel analog input, measuring bridge, full bridge, 24 bit, push-in, sensor supply 5/10 V DC, with 2 x digital combi

Disponibile su richiesta

EtherCAT Terminal, 2-channel analog input, measuring bridge, full bridge, 24 bit, push-in, sensor supply 5/10 V DC, with 2 x digital combi

Name: EtherCAT Terminal, 2-channel analog input, measuring bridge, full bridge, 24 bit, push-in, sensor supply 5/10 V DC, with 2 x digital combi
Brand: Beckhoff
SKU: ED3362

Codice: ED3362 · Marchio: Beckhoff

Prezzo su richiesta

Richiedi un preventivo

Garanzia di 12 mesi (nuovo) · 3 mesi (usato/rigenerato)

Reso entro 30 giorni, nessuna commissione di riassortimento sui pezzi non utilizzati

Spedito tramite

In breve

Disponibilità	Conferma su richiesta
Categoria	EL/ED3xxx \| Analog input
Ciclo di vita	active
Garanzia	12 mesi (nuovo) · 3 mesi (usato/rigenerato)

Spedizione e disponibilità

Quando può essere spedito ED3362?

ED3362 viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.

Posso ritirare ED3362 di persona?

Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.

È disponibile la consegna espressa?

Sì — menzionalo nella richiesta di preventivo per ED3362 e includeremo le opzioni di spedizione espressa nella nostra risposta.

Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?

In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per ED3362, in base a disponibilità e destinazione.

The ED3362 analog input terminal enables the direct connection of two independent resistance bridges (strain gauges – SG) or load cells using the 4-wire or 6-wire connection technique. It records the ratio of the bridge voltages UBridge to the measured

Specifiche

Specifications

Number of channels \| Total	2
Internal communication protocol	EtherCAT
Number of channels	max. 2
Sensor types	Strain gauge, load cells
Connection technology	push-in
Resolution \| Technical	24 bit
Resolution \| Process data	18.34... nV/V
Display \| Process data	REAL32, INT16, INT32
ADC conversion method	delta-sigma
Conversion type	simultaneous
Conversion time	min. 100 µs
Conversion rate	max. 10 ksps
Signal range \| UBridge	± 4 V DC
Signal range \| UBridge, final value (FSV)	4 V DC
Signal range \| USense	± 13 V DC
Signal range \| USense, final value (FSV)	13 V DC
Internal resistance/impedance \| UBridge	min. 5 MΩ
Internal resistance/impedance \| USense	min. 5 MΩ
Ground reference	differential
Measuring procedure	ratiometric
Input filter limit frequency	10 kHz
Dielectric strength	max. 30 V
Accuracy/uncertainty \| Of the FSV	±0.05%
Sensor supply \| Output voltage	5 V DC/10 V DC
Sensor supply \| Output current	max. 100 mA
Open-circuit recognition	yes
Function	trigger output
Signal range \| Technical	max. 28.8 V DC
Specification	potential-free
“0” signal voltage	0…1.5 V DC
“1” signal voltage	2.5…30 V DC
Input filter	2.5 µs
Input current	3 mA
Load type	ohmic
Signal range \| Nominal	max. 24 V DC
Output current	max. 150 mA
Switching times \| TON	typ. 1.4 ms
Switching times \| TOFF	typ. 0.2 ms
Diagnostics	yes
Short-circuit detection	> 6.5 mA
Breaking energy \| Inductive	100 mJ
Microincrements	no
Distributed clocks	no
Timestamp	no
Oversampling	no
Electronics \| Supply voltage	via E-bus
E-bus \| Current consumption	typ. 100 mA
Power contacts \| Input voltage	24 V DC (-15%/+20%)
Power contacts \| Current carrying capacity	max. 10 A DC
Power contacts \| Current consumption	load-dependent
Power contacts \| Output voltage	corresponds to Power contacts \| Input voltage
Electrical isolation \| Channel/channel	no
Electrical isolation \| Channel/bus	functional, 707 V DC type test
Operating temperature	-25…+55°C
Storage temperature	-40…+85°C
Relative humidity	95%, no condensation
Installation position	variable
Vibration resistance	conforms to EN 60068-2-6
Shock resistance	conforms to EN 60068-2-27
EMC immunity	conforms to EN 61000-6-2
EMC emission	conforms to EN 61000-6-4
Markings	CE
Approvals	UL (in preparation)
Weight	60 g
Protection rating	IP20
Material	polycarbonate
Dimesnions \| Width (single)	15 mm
Dimensions \| Width (lined up)	12 mm
Dimensions \| Height	100 mm
Dimensions \| Depth	65 mm
Installation \| Terminal/back wall	DIN rail, 35 mm (EN 60715)
Installation \| Terminal/terminal	double slot and key connection
Plug-in wiring level	no
Connection cross-section \| Solid wire	0.08…1.5 mm²
Connection cross-section \| Stranded wire	0.25…1.5 mm²
Connection cross-section \| With ferrule	0.14…0.75 mm²
Connection cross-section AWG \| Solid wire	AWG28…16
Connection cross-section AWG \| Stranded wire	AWG22…16
Connection cross-section AWG \| With ferrule	AWG26…19
Stripping length	8…9 mm
Power contact \| "+" (left)	yes
Power contact \| "+" (rechts)	yes
Power contact \| "-" (left)	yes
Power contact \| "-" (right)	yes
Power contact \| "⏚" (left)	no
Power contact \| "⏚" (right)	no
Insertion lock for power contact “⏚”	yes