Componenti Wago

Push-in type wire jumper; insulated; 60 mm long; black

End plate; with fixing flange; gray

Protection cover; transparent

Strain relief plate; for female and male connectors; 1 part; Pin spacing 5 mm; 4- to 5-pole; gray

Ferrule; Sleeve for 1.5 mm² / AWG 16; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90; black

WMB marking card; as card; MARKED; 1 ... 50 (2x); not stretchable; Horizontal marking; snap-on type; white

Shield clamp; diameter of compatible conductor; 1.5 mm to 6.5 mm; H max. 40 mm; 10 mm wide

Memory Card SD Micro; 2 GByte

Ferrule; Sleeve for 0.34 mm² / 22 AWG; insulated; electro-tin plated; light turquoise

Group marker carrier; white

Nozzles; Length: 23 mm; For the use of 211-821; halogen-free; transparent

Aluminum carrier rail; 35 x 8.2 mm; 1.6 mm thick; 2 m long; unslotted; similar to EN 60715; silver-colored

WSB marking card; as card; MARKED; 1 ... 50 (2x); not stretchable; Horizontal marking; snap-on type; white

Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; according to EN 60715; "Hole width 18 mm; silver-colored

WSB marking card; as card; not stretchable; plain; snap-on type; white

Jumper; insulated; gray

Type labels; 50 x 25 mm; silver-colored

Ferrule; Sleeve for 2.5 mm² / AWG 14; insulated; electro-tin plated; blue

Strain relief housing; 2-pole; with locking clip; for 1 cable; 3.8 … 8.2 mm; 17.5 mm; black

Labels; for Smart Printer; permanent adhesive; 9 x 15 mm; 3000 pieces on roll; yellow

Ferrule; Sleeve for 1 mm² / AWG 18; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90; red

Flat cable; B2ca; 5G 16 mm²; halogen-free; 3L + N + PE; 0.6/1 kV; 16,00 mm²; light gray

Relay socket; 1 changeover contact; for basic relays 15 mm x 25 mm; gray

Staggered jumper; from 1 to 3; insulated; gray