Disponible sur demande

Voltage signal conditioner; Voltage input signal; Current and voltage output signal; Digital output; Configuration via software; Supply voltage: 24 VDC; 6 mm module width

Référence: 857-560 · Marque: Wago
Prix sur demande
Demander un devis

Une personne vous répondra, généralement sous 1 jour ouvré — voir notre politique de confidentialité.

Garantie de 12 mois (neuf) · 3 mois (occasion/reconditionné)
Retours sous 30 jours, sans frais de réapprovisionnement sur les pièces non utilisées
Expédié via

En bref

DisponibilitéConfirmation sur demande
CatégorieSignal Conditioners and Isolation Amplifiers
Cycle de vieactive
Garantie12 mois (neuf) · 3 mois (occasion/reconditionné)

Livraison & disponibilité

Quand 857-560 peut-il être expédié ?

857-560 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.

Puis-je récupérer 857-560 en personne ?

Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.

La livraison express est-elle disponible ?

Oui — mentionnez-le lors de votre demande de devis pour 857-560 et nous inclurons les options de livraison express dans notre réponse.

Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?

En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour 857-560, selon la disponibilité et la destination.

<p><b>Short description:</b></p><p>WAGO's voltage signal conditioner measures AC/DC voltages up to 300 V, converting the input signal into a standard analog signal at the output.</p><p><b>Features:</b></p><ul><li>Two isolated measurement inputs for 30 and 300 V AC/DC</li><li>RMS measurement or arithmetic mean value</li><li>A digital signal output reacts to configured measurement range limits (on/off switching delay and threshold value switch function can be configured with up to two threshold values).</li><li>Switchable filter function</li><li>3-way electrical isolation with 2.5 kV test voltage</li></ul>

Caractéristiques

Technical data - Configuration

Configuration optionsDIP switch, WAGO Interface Configuration Software

Technical data - Input

Input signal typeVoltage
Input signal (voltage)300 V AC/DC (IN 1), 30 V AC/DC (IN 2)
Measurement frequency10 … 100 Hz (AC)
Frequency range10 … 100 Hz (AC)
Input resistance (voltage input)≥ 300 kΩ
Response threshold300 mV (IN 1); 30 mV (IN 2)
Resolution (voltage)30 mV (IN 1), 3 mV (IN 2)

Technical data - Output (analog)

Output signal typeCurrent, Voltage
Output signal (voltage)0 … 5 V, 1 … 5 V, 0 … 10 V, 2 … 10 V (invertible, also bipolar)
Output signal (current)0 … 10 mA, 2 … 10 mA, 0 … 20 mA, 4 … 20 mA (invertable, also bipolar)
Load impedance (voltage output)≥ 1 kΩ
Load impedance (current output)≤ 600 Ω

Technical data - Output (digital)

Switching voltage (DO) max.Supply voltage applied
Continuous current (DO) max.100 mA (no internal restriction)
Number of switching thresholds (DO)1 or 2 (adjustable)
Configurable rise/fall delay time (DO)0 … 60 s (via software)

Technical data - Signal processing

Measurement methodRMS measurement; Arithmetic mean value
Limit frequency2 kHz
Software filter (adjustable)Moving average value (filter level: 30)
Step response (typ.)30 ms

Technical data - Measurement error

Transmission error (max.)≤ 0.5 % (of the full scale value)
Temperature coefficient≤ 0.01 %/K

Technical data - Power supply

Power supply type24 VDC
Nominal supply voltage U<sub>S</sub>24 VDC
Supply voltage range±30 %
Current consumption at nominal supply voltage≤ 46 mA (+ IDO)

Safety and protection

Rated voltage300 V; 150 V (UL)
Measurement category per EN/UL 61010-2-030CAT II (input)
Note on insulation parametersDanger: Configuration via the service interface must only be performed with a voltage-free measurement input! The digital output (DO) operates at the supply potential.
Protection typeIP20

Safety and protection - Test voltage

Test voltage (input/analog output/supply/service interface)2.5 kVAC; 50 … 60 Hz; 1 min

Safety and protection - Insulation coordination (UL)

Overvoltage categoryII
Pollution degree2
Insulation type (input/analog output/supply/service interface)Reinforced insulation (safe isolation)

Safety and protection - Insulation coordination

Overvoltage categoryII
Pollution degree2
Insulation type (input/analog output/supply/service interface)Double insulation (impedance and basic insulation);Requirement: The GND 1 input must not become hazardous when active and the measurement is performed as a low-side measurement!

Connection data

Connection technologyPush-in CAGE CLAMP®
Solid conductor0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor0.34 … 2.5 mm² / 22 … 14 AWG
Strip length9 … 10 mm / 0.35 … 0.39 inches

Physical data

Width6 mm / 0.236 inches
Height94 mm / 3.701 inches
Depth from upper-edge of DIN-rail97.8 mm / 3.85 inches

Mechanical data

Mounting typeDIN-35 rail

Material data

Insulation material (main housing)Polyamide (PA66)
Flammability class per UL94V0
Fire load0.013 MJ
Weight34 g

Environmental requirements

Ambient temperature (operation)-40 … +70 °C (at nominal current)
Ambient temperature (storage)-40 … +85 °C
Temperature range of connection cable≥ (Tambient + 10 K)
Temperature range of the connection cable (UL)80 °C
Relative humidity5 … 95 % (no condensation permissible)
Operating altitude (max.)2000 m

Standards and specifications

Conformity markingCE
EMC immunity to interferenceEN 61000-6-2; EN 61326-2-3; EN 50121-3-2
EMC emission of interferenceEN 61000-6-3; EN 61326-2-3; EN 50121-3-2
Standards/specificationsEN 61010-1, EN 61373, EN 50121-3-2

Commercial data

PU (SPU)1 pcs
Packaging typebag
Country of originDE
GTIN4055143481571
Customs tariff number85437090300

Product Classification

UNSPSC41113630
eCl@ss 10.027-21-01-25
eCl@ss 9.027-21-01-25
ETIM 9.0EC002477
ETIM 10.0EC002477
ECCNNO US CLASSIFICATION

Environmental Product Compliance

CAS-No.11120-22-2, 1303-86-2, 1317-36-8, 7439-92-1, 75980-60-8
REACH Candidate List SubstanceDiboron trioxide, Lead, Lead monoxide, Lead silicate, Phosphine oxide, diphenyl(2,4,6-trimethylbenzoyl)-
RoHS Compliance StatusCompliant,With Exemption
RoHS Exemption6(c), 7(a), 7(c)-I, 7(c)-II
SCIP notification number (Austria)e39ffb15-f554-4816-a577-82f294898011
SCIP notification number (Belgium)4e3c29de-9839-4487-8450-21e290cce428
SCIP notification number (Bulgaria)a62309da-6e93-49d0-9ca6-31ee2cbbee05
SCIP notification number (Czech Republic)4e179792-6d82-43e7-a0bc-61c1bbf5190b
SCIP notification number (Denmark)d9e51cec-dd28-4094-8511-04bde8b72d54
SCIP notification number (Finland)bfe296bd-7c71-4597-9172-90001c8c8f8c
SCIP notification number (France)396a94fe-cc62-47b3-ae66-2fa168881435
SCIP notification number (Germany)fbcf3bd8-1c98-48b5-a7db-5e8e81acb7f1
SCIP notification number (Hungary)2b23d5cf-8881-40dc-b708-8ad82f781d25
SCIP notification number (Italy)a6a805df-791f-45bb-b670-7af08d995145
SCIP notification number (Netherlands)9cd592c7-c51d-4742-a863-2d13dd0e889c
SCIP notification number (Poland)2b299cf8-7127-49b5-ba48-13995ec4bfb6
SCIP notification number (Romania)d8ac266d-97e5-40de-a3e4-c13eda02beb5
SCIP notification number (Sweden)02e70fdd-434e-4d94-91a6-1e9375b034c3
Garantie de 12 moissur tous les articles neufs
Garantie de 3 moissur les pièces d'occasion et reconditionnées
Retours sous 30 jourssans frais de réapprovisionnement sur les pièces non utilisées
Livraison mondialeLivraison rapide et suivie dans le monde entier

Plus de pièces Wago

Wago - 8MCSOccasionWago - 8MCS
Référence: 8MCS · Wago
€5.30
Voir les détails
Wago - 4MCSOccasionWago - 4MCS
Référence: 4MCS · Wago
€5.30
Voir les détails
Wago AW6 26-14OccasionWago AW6 26-14
Référence: AW6 26-14 · Wago
€5.30
Voir les détails
WAGO 750-602 UsedOccasionWAGO 750-602 Used
Référence: 750-602 · Wago
€10.60
Voir les détails