Surge suppression module for signal technology; Nominal voltage: 24 VDC; for 2 signal paths with common surge arrester; for unbalanced interfaces; Two-stage; Width: 6 mm; 2,50 mm²
Demander un devis
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | Protective Devices and Protective Electronics |
| Cycle de vie | active |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand 792-800 peut-il être expédié ?
792-800 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer 792-800 en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour 792-800 et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour 792-800, selon la disponibilité et la destination.
<p><b>Short description: </b></p><p>Provides surge protection for IT systems and devices in the voltage range up to 60 V (except custom solutions, e.g., telephone systems with ringing voltage). </p><p>Overvoltage protection is also possible for DIN-35 rail-mount terminal blocks. Multi-stage surge arresters in rail-mount terminal blocks (792-80x Series) of just 6 mm width ensure cost-effective protection for control and bus technology (e.g., LON<sup>®</sup> network, PROFIBUS network, binary signals). </p><p><b>Features:</b></p><ul><li>Protect your system against overvoltage </li><li>Slim, space-saving design </li><li>Control operational costs by preventing expensive, unplanned downtime </li><li>High operational reliability and system uptime</li></ul>
Caractéristiques
Notes
| Safety Information | - Installation must be performed by qualified personnel only.- The DIN-rail must be grounded.- The input current must be protected by a suitable fuse.- Protection against contact with stored charges must be ensured.- Do not insert or remove pluggable modules when energized.- The IP20 protection rating must be maintained in the assembled state or when using an end/intermediate plate compatible with the rail-mount terminal block. |
| Note | The coordination characteristics of the surge arrester provide information about its discharge capacity and protection capability. |
Electrical data
| Nominal operating voltage | 24 VDC |
| Maximum continuous voltage | 23 VAC / 33 VDC |
| Nominal current | 0.5 A |
| Nominal discharge current (8/20 µs) (line) | 5 kA |
| Nominal discharge current (8/20 µs) (total) | 10 kA |
| Protection level (line/line) (cat. C2 at I<sub>N</sub>) | ≤ 110 V |
| Protection level (line/protected ground) (cat. C2 at I<sub>N</sub>) | ≤ 65 V |
| Protection level (line/line) (cat. C3 at I<sub>N</sub>) | ≤ 90 V |
| Protection level (line/protected ground) (cat. C3 at I<sub>N</sub>) | ≤ 45 V |
| Limit frequency (line/line) | 6 MHz |
| Limit frequency (line/protected ground) | 6 MHz |
| Impedance | 1.8 Ω |
Safety and protection
| Protection type | IP00; IP20 with end and intermediate plate |
Connection data
| Connections (number) | 5 |
| Connection technology | CAGE CLAMP® |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Strip length | 5 … 6 mm / 0.2 … 0.24 inches |
Physical data
| Width | 6 mm / 0.236 inches |
| Height | 91 mm / 3.58 inches |
| Depth from upper-edge of DIN-rail | 56 mm / 2.2 inches |
Mechanical data
| Mounting type | DIN-35 rail, DIN-35 rail |
Material data
| Weight | 38.8 g |
Environmental requirements
| Ambient temperature (operation) | -40 … +80 °C |
| Ambient temperature (storage) | -40 … +80 °C |
Standards and specifications
| Standards/specifications | IEC 61643-21, IEC 61643-21 |
Commercial data
| Product Group | 21 (Special Products Electronic) |
| PU (SPU) | 1 pcs |
| Packaging type | Box |
| Country of origin | DE |
| GTIN | 4017332780735 |
| Customs tariff number | 85363010000 |
Product Classification
| UNSPSC | 39121610 |
| eCl@ss 10.0 | 27-13-08-05 |
| eCl@ss 9.0 | 27-13-08-05 |
| ETIM 9.0 | EC000943 |
| ETIM 10.0 | EC000943 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| RoHS Compliance Status | Compliant,No Exemption |
