Disponible sur demande

Tap-off module; for flat cable; 5 x 2.5 mm² + 2 x 1.5 mm²; 3-pole; Cod. A; with cable connection on the output side; black

Référence: 772-263 · Marque: Wago
Prix sur demande
Demander un devis

Une personne vous répondra, généralement sous 1 jour ouvré — voir notre politique de confidentialité.

Garantie de 12 mois (neuf) · 3 mois (occasion/reconditionné)
Retours sous 30 jours, sans frais de réapprovisionnement sur les pièces non utilisées
Expédié via

En bref

DisponibilitéConfirmation sur demande
CatégoriePluggable Connectors
Cycle de vieactive
Garantie12 mois (neuf) · 3 mois (occasion/reconditionné)

Livraison & disponibilité

Quand 772-263 peut-il être expédié ?

772-263 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.

Puis-je récupérer 772-263 en personne ?

Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.

La livraison express est-elle disponible ?

Oui — mentionnez-le lors de votre demande de devis pour 772-263 et nous inclurons les options de livraison express dans notre réponse.

Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?

En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour 772-263, selon la disponibilité et la destination.

<h2>Tap-off module <i>WINSTA</i>® IDC with protection against mismating</h2><br/><br/>The <i>WINSTA</i>® IDC tap-off module rated current 25 A supports rapid, correct installation. WAGO pluggable installation connectors are useful when criteria repeat or are planned on a defined pattern, for example for installing grid lighting or flush-mount lighting. The coding options reduce installation errors, allowing fast, secure wiring of all components. The pluggable installation connector is protected in accordance with protection type IP20 (When mated: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)). That results in the fact that users' fingers will never come into contact with live elements. Standard mains applications for almost any domain of use can be realised with <i>WINSTA</i>® IDC pluggable installation connectors with A coding. The rated current and voltage are important criteria for selecting a pluggable installation connector: They provide information about possible domains of use and applications. This product has a current rating of 25 A – therefore it is also suitable for powerful loads.<br/><br/><h3><i>WINSTA</i>® IDC solutions for your electrical installation – protected against mismating and maintenance-free</h3><br/><br/>The WINSTA® Pluggable Connection System allows pluggable electrical installation. This saves time, lowers costs, and reduces the need for servicing. Now you can also cut installation expenses without compromising safety and quality: with protection type IP20 reduces the need for servicing and prevents unnecessary downtime. <br/><br/><ul><br/><li>pluggable installation connectors with protection against mismating</li><li>saves time, since no wiring is required at the construction site</li><li>with A coding for use in a large number of general mains applications</li><li>custom-engineered solutions</li><li>convenient installation and commissioning</li></ul>

Caractéristiques

Electrical data - Ratings per IEC/EN

Ratings perIEC/EN 60664-1
Nominal voltage (III/3)400 V
Rated impulse withstand voltage (III / 3)6 kV
Rated current25 A
Legend (ratings)(III / 3) ≙ Overvoltage category III / Pollution degree 3
Ratings perIEC/EN 60664-1 / IEC/EN 60664-1 / IEC/EN 60664-1
Overvoltage categoryIII / III / II
Pollution degree3 / 2 / 2
Nominal voltage400 V
Rated impulse withstand voltage6 kV
Rated current25 A

Electrical data - General information

Note on contact resistanceapprox. 1 mΩ of contact resistance approx. 0.25 mΩ contact transition plug/socket

Connection data

Total number of potentials3

Connection data - Connection 1

Connection technologyIDC connection
Actuation typeOperating tool
Pole number3

Physical data

Width49 mm / 1.929 inches
Height46.5 mm / 1.831 inches
Depth79 mm / 3.11 inches

Mechanical data

UseGeneral mains applications
CodingA
Variable codingYes
MarkingL ⏚ N
Potential markingL ⏚ N
Retention force of a plug-in connectionWhen locked: > 80 N
Number of mating cycles200, without resistive load
Protection typeIP20; When mated: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)
Suitablefor flat cable 5 x 2.5 mm², 5 x 4 mm², 5 x 2.5 mm² + 2 x 1.5 mm²

Plug-in connection

Mismating protectionYes
Note on mismating protectionAll WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180 c.) plugging while laterally staggeredd.) plugging one pole
Locking of plug-in connectionlocking lever
Note on locking systemAll connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).

Material data

Note (material data)Information on material specifications can be found here
Colorblack
Insulation material (main housing)Polyamide (PA66)
Flammability class per UL94V0
Contact materialCopper or copper alloy; surface-treated
Contact platingTin
Fire load1.91 MJ
Weight70.1 g

Environmental requirements

Processing temperature-5 … +40 °C
Continuous operating temperature-35 … +85 °C
Note on continuous operating temperatureCable for temperatures ≤ 70 °C (including halogen-free)Flat cable for temperatures –15 °C to ≤ 70 °C (including halogen-free)Insulating parts for temperatures ≤ 105 °C

Commercial data

Product Group20 (Winsta)
PU (SPU)10 pcs
Packaging typebox
Country of originDE
GTIN4045454062019
Customs tariff number85366990990

Product Classification

UNSPSC39121421
eCl@ss 10.027-44-06-01
eCl@ss 9.027-44-06-01
ETIM 9.0EC002588
ETIM 10.0EC002588
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,No Exemption
Garantie de 12 moissur tous les articles neufs
Garantie de 3 moissur les pièces d'occasion et reconditionnées
Retours sous 30 jourssans frais de réapprovisionnement sur les pièces non utilisées
Livraison mondialeLivraison rapide et suivie dans le monde entier

Plus de pièces Wago

Wago - 8MCSOccasionWago - 8MCS
Référence: 8MCS · Wago
€5.30
Voir les détails
Wago - 4MCSOccasionWago - 4MCS
Référence: 4MCS · Wago
€5.30
Voir les détails
Wago AW6 26-14OccasionWago AW6 26-14
Référence: AW6 26-14 · Wago
€5.30
Voir les détails
WAGO 750-602 UsedOccasionWAGO 750-602 Used
Référence: 750-602 · Wago
€10.60
Voir les détails