Disponible sur demande
IFM SU2020
Référence: SU2020 · Marque: IFM
Prix sur demande
Demander un devis
Garantie de 12 mois (neuf) · 3 mois (occasion/reconditionné)
Retours sous 30 jours, sans frais de réapprovisionnement sur les pièces non utilisées
Expédié via
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | Ultrasonic flow meters |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand SU2020 peut-il être expédié ?
SU2020 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer SU2020 en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour SU2020 et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour SU2020, selon la disponibilité et la destination.
Accurate flow measurement of ultrapure water and water
A robust, component-free measuring pipe made of stainless steel offers high media resistance and permanent ingress resistance
The highly accurate inline measurement process eliminates any influence of varying wall thicknesses and pipe materials
Operating status LED signals the sensor status and allows conclusions about process quality
Convenient operation via buttons or parameter setting via IO-Link
Caractéristiques
Product characteristics
| Measuring range | 5...1000 l/min; 300...60000 l/h; 0.058...11.666 m/s; 0.3...60 m³/h |
| 5...1000 l/min | 300...60000 l/h |
| Process connection | threaded connection G 2 external thread DN50 |
Application
| Special feature | Gold-plated contacts |
| Media | ultra-pure water; water; hydrous media |
| Note on media | hydrous media: for media with >10 % additives, the repeatability is the only available value |
| Medium temperature[°C] [°C] | -20...100 |
| Min. burst pressure | 150 bar; 15 MPa |
| 150 bar | 15 MPa |
| Pressure rating | 100 bar; 10 MPa |
| 100 bar | 10 MPa |
| Vacuum resistance[mbar] [mbar] | -1000 |
| MAWP for applications according to CRN | 36.6 bar; 3.66 MPa |
| 36.6 bar | 3.66 MPa |
Electrical data
| Operating voltage[V] [V] | 18...32 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 75 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | 5 |
| Measuring principle | ultrasonic |
Inputs
| Inputs | counter reset |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; pulse signal; analogue signal; IO-Link; frequency signal; diagnostic signal; totaliser switching signal |
| Electrical design | PNP/NPN |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Switching frequency DC[Hz] [Hz] | 0...10000 |
| Analogue current output[mA] [mA] | 4...20 |
| Max. load[Ω] [Ω] | 500 |
| Pulse output | flow rate meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Measuring range | 5...1000 l/min; 300...60000 l/h; 0.058...11.666 m/s; 0.3...60 m³/h |
| 5...1000 l/min | 300...60000 l/h |
| Display range | -1200...1200 l/min; -72000...72000 l/h; -13.999...13.999 m/s; -72...72 m³/h |
| -1200...1200 l/min | -72000...72000 l/h |
| Resolution | 0.1 l/min; 1 l/h; 0.001 m/s; 0.002 m³/h |
| 0.1 l/min | 1 l/h |
| Set point SP | 10.5...1000 l/min; 630...60000 l/h; 0.122...11.666 m/s; 0.63...60 m³/h |
| 10.5...1000 l/min | 630...60000 l/h |
| Reset point rP | 5.3...994.8 l/min; 318...59688 l/h; 0.062...11.605 m/s; 0.318...59.688 m³/h |
| 5.3...994.8 l/min | 318...59688 l/h |
| Analogue start point ASP | -1000...800 l/min; -60000...48000 l/h; -11.666...9.333 m/s; -60...48 m³/h |
| -1000...800 l/min | -60000...48000 l/h |
| Analogue end point AEP | -800...1000 l/min; -48000...60000 l/h; -9.333...11.666 m/s; -48...60 m³/h |
| -800...1000 l/min | -48000...60000 l/h |
| Low flow cut-off LFC | 5...50 l/min; 300...3000 l/h; 0.058...0.583 m/s; 0.3...3 m³/h |
| 5...50 l/min | 300...3000 l/h |
| Frequency end point, FEP | 200.6...1000 l/min; 12037...60000 l/h; 2.34...11.666 m/s; 12.037...60 m³/h |
| 200.6...1000 l/min | 12037...60000 l/h |
| Frequency at the end point FRP[Hz] [Hz] | 1...10000 |
| Pulse length[s] [s] | 0.002...2 |
| Pulse value | 0.1...99990000 I |
| Measuring range[°C] [°C] | -20...100 |
| Display range[°C] [°C] | -44...124 |
| Resolution[°C] [°C] | 0.1 |
| Set point SP[°C] [°C] | -19.6...100 |
| Reset point rP[°C] [°C] | -20...99.6 |
| Analogue start point[°C] [°C] | -20...76 |
| Analogue end point[°C] [°C] | 4...100 |
| Frequency start point, FSP[°C] [°C] | -20...76 |
| Frequency end point, FEP[°C] [°C] | 4...100 |
Accuracy / deviations
| Accuracy (in the measuring range) | ± (1,0 % MW + 0,5 % MEW) |
| Repeatability | ± 0,2 % MEW |
| Accuracy[K] [K] | ± 2,5 (Q > 5 % MEW) |
| Temperature coefficient[% of the span / 10 K] [% of the span / 10 K] | 0,2 |
Response times
| Response time[s] [s] | < 0.25; (dAP = 0, T09) |
| Damping process value dAP[s] [s] | 0...5 |
| Dynamic response T05 / T09[s] [s] | 5,7 / 86 |
Software / programming
| Diagnostic functions | direction of flow detection; signal quality |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1.3 |
| SDCI standard | IEC 61131-9: 2013-07 |
| Profiles | BLOB; Binary Large Object transfer; Common - I&D; Identification and Diagnosis |
| BLOB | Binary Large Object transfer |
| Common - I&D | Identification and Diagnosis |
| Required master port type | A |
| Process data analogue | 3 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 9.6 |
| IO-Link process data (cyclical) | totaliser; 32; Flow monitoring; 32; Temperature monitoring; 32; status; 4; Output 1; 1; Output 2; 1 |
| totaliser | 32 |
| Flow monitoring | 32 |
| Temperature monitoring | 32 |
| status | 4 |
| Output 1 | 1 |
| Output 2 | 1 |
| Supported DeviceIDs | default; 1461 |
| default | 1461 |
Operating conditions
| Ambient temperature[°C] [°C] | -20...60 |
| Storage temperature[°C] [°C] | -25...80 |
| Protection | IP 67 |
Tests / approvals
| EMC | DIN 61326-1:2021 |
| CPA approval | model number; 002US; accuracy class; 1,5 |
| model number | 002US |
| accuracy class | 1,5 |
| Shock resistance | DIN IEC 68-2-27; 20 g (11ms) |
| DIN IEC 68-2-27 | 20 g (11ms) |
| Vibration resistance | DIN IEC 68-2-6; 20 g (10...2000Hz) |
| DIN IEC 68-2-6 | 20 g (10...2000Hz) |
| MTTF[years] [years] | 160 |
| UL approval | UL approval no.; I033; File number UL; E174189 |
| UL approval no. | I033 |
| File number UL | E174189 |
| Pressure Equipment Directive | can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight[g] [g] | 1180 |
| Housing | rectangular |
| Type of mounting | inlet pipe length 5xDN; outlet pipe length 1xDN |
| Dimensions[mm] [mm] | 200 x 59.6 x 90.5 |
| Materials | housing: stainless steel (316L/1.4404); Display: PFA; Sealing Display: FKM; connector: PBT |
| Materials (wetted parts) | Pipe section: stainless steel (316L/1.4404); Process connection sealing: NBR reinforced fibre Flat seal |
| Process connection | threaded connection G 2 external thread DN50 |
| Surface characteristics Ra/Rz of the wetted parts | Ra < 1.25 µm |
Displays / operating elements
| Display | colour display 1,44", 128 x 128 pixels; Switching function; 2 x LED, yellow; diagnosis; 1 x LED, three-colour |
| Switching function | 2 x LED, yellow |
| diagnosis | 1 x LED, three-colour |
| Display unit | l/min; l/h; m³/h; m/s |
Accessories
| Items supplied | Flat seal 2, Centellen; package insert |
Remarks
| Remarks | MW = measured value; MEW = Final value of the measuring range; pulse and totaliser signal are only available for one of the two outputs; the accuracy indications are adhered to over the entire application area |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
Garantie de 12 moissur tous les articles neufs
Garantie de 3 moissur les pièces d'occasion et reconditionnées
Retours sous 30 jourssans frais de réapprovisionnement sur les pièces non utilisées
Livraison mondialeLivraison rapide et suivie dans le monde entier
