Accueil / IFM / IFM SM8030

Disponible sur demande

IFM SM8030

Name: IFM SM8030
Brand: IFM
SKU: SM8030

Référence: SM8030 · Marque: IFM

Prix sur demande

Demander un devis

Garantie de 12 mois (neuf) · 3 mois (occasion/reconditionné)

Retours sous 30 jours, sans frais de réapprovisionnement sur les pièces non utilisées

Expédié via

En bref

Disponibilité	Confirmation sur demande
Catégorie	Magnetic-inductive volumetric flow meters
Garantie	12 mois (neuf) · 3 mois (occasion/reconditionné)

Livraison & disponibilité

Quand SM8030 peut-il être expédié ?

SM8030 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.

Puis-je récupérer SM8030 en personne ?

Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.

La livraison express est-elle disponible ?

Oui — mentionnez-le lors de votre demande de devis pour SM8030 et nous inclurons les options de livraison express dans notre réponse.

Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?

En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour SM8030, selon la disponibilité et la destination.

Precise measurement of flow, consumption and medium temperature High accuracy, repeatability and measurement dynamics With switching output, analogue output and pulse output Clearly readable colour display with red/green colour change No inlet and output pipe lengths required Convenient operation via buttons or parameter setting via IO-Link

Caractéristiques

Product characteristics

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Measuring range[l/min] [l/min]	0.2...250
Process connection	threaded connection G 1 external thread DN25 flat seal

Application

Special feature	Gold-plated contacts
Media	conductive liquids; water; hydrous media
Note on media	conductivity: ≥ 20 µS/cm; viscosity: < 70 mm²/s (40 °C)
Medium temperature[°C] [°C]	-20...90
Pressure rating	16 bar; 1.6 MPa
16 bar	1.6 MPa

Electrical data

Operating voltage[V] [V]	18...30 DC; (to SELV/PELV)
Current consumption[mA] [mA]	< 80
Protection class	III
Reverse polarity protection	yes
Power-on delay time[s] [s]	5
Measuring principle	magnetic-inductive

Inputs / outputs

Number of inputs and outputs

Number of digital outputs: 2; Number of analogue outputs: 1

Inputs

counter reset

Outputs

Total number of outputs	2
Output signal	switching signal; analogue signal; pulse signal; IO-Link; frequency signal; (configurable)
Electrical design	PNP/NPN
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC[V] [V]	2
Permanent current rating of switching output DC[mA] [mA]	100
Number of analogue outputs	1
Analogue current output[mA] [mA]	4...20; (scalable)
Max. load[Ω] [Ω]	500
Pulse output	flow rate meter
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes

Measuring/setting range

Measuring range[l/min] [l/min]	0.2...250
Display range[l/min] [l/min]	-300...300
Resolution[l/min] [l/min]	0.1
Set point SP[l/min] [l/min]	1.6...250
Reset point rP[l/min] [l/min]	0.3...248.7
Analogue start point ASP[l/min] [l/min]	0...199.9
Analogue end point AEP[l/min] [l/min]	50.1...250
Low flow cut-off LFC[l/min] [l/min]	0.2...12.5
Frequency end point, FEP[l/min] [l/min]	50.1...250
Frequency at the end point FRP[Hz] [Hz]	1...10000
Pulse length[s] [s]	0.002...2
Pulse value	0.01...99990000.00 l
Measuring range[°C] [°C]	-20...90
Display range[°C] [°C]	-42...112
Resolution[°C] [°C]	0.1
Set point SP[°C] [°C]	-19.6...90
Reset point rP[°C] [°C]	-20...89.6
Analogue start point[°C] [°C]	-20...68
Analogue end point[°C] [°C]	2...90
In steps of[°C] [°C]	0.1

Accuracy / deviations

Accuracy (in the measuring range)	± (0,8 % MW + 0,2 % MEW)
Repeatability	± 0,2 % MEW
Accuracy[K] [K]	± 2,5 (Q > 5 % MEW)

Response times

Start-up delay[s] [s]	0...50
Response time[s] [s]	15; (Q > 10 % MEW, T09)
Damping process value dAP[s] [s]	0...5

Software / programming

Parameter setting options

hysteresis / window; normally open / normally closed; switching logic; frequency output; current/pulse output; start-up delay; display can be deactivated; Display unit

Interfaces

Communication interface	IO-Link
Transmission type	COM2 (38,4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9
Profiles	Common - I&D; Identification and Diagnosis; Function; Measurement data, standard resolution
Common - I&D	Identification and Diagnosis
Function	Measurement data, standard resolution
SIO mode	yes
Required master port type	A
Process data analogue	3
Process data binary	2
Min. process cycle time[ms] [ms]	8
Supported DeviceIDs	default; 1303
default	1303

Operating conditions

Ambient temperature[°C] [°C]	-20...60
Storage temperature[°C] [°C]	-25...80
Protection	IP 65; IP 67

Tests / approvals

EMC	DIN EN 60947-5-9
Shock resistance	DIN IEC 68-2-27; 20 g (11 ms)
DIN IEC 68-2-27	20 g (11 ms)
Vibration resistance	DIN IEC 68-2-6:; 5 g (10...2000 Hz)
DIN IEC 68-2-6:	5 g (10...2000 Hz)
MTTF[years] [years]	114
UL approval	UL approval no.; I014; File number UL; E174189
UL approval no.	I014
File number UL	E174189
Pressure Equipment Directive	Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical data

Weight[g] [g]	784.25
Housing	rectangular
Dimensions[mm] [mm]	110 x 48 x 73
Materials	stainless steel (316/1.4408); stainless steel (316L/1.4404); PC; PBT+PC-GF30
Materials (wetted parts)	Pipe section: stainless steel (316L/1.4404); Process connection sealing: NBR reinforced fibre Flat seal; FKM; PEEK; carbon fibre PEEK
Process connection	threaded connection G 1 external thread DN25 flat seal