Disponible sur demande
IFM SM7420
Référence: SM7420 · Marque: IFM
Prix sur demande
Demander un devis
Garantie de 12 mois (neuf) · 3 mois (occasion/reconditionné)
Retours sous 30 jours, sans frais de réapprovisionnement sur les pièces non utilisées
Expédié via
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | Magnetic-inductive volumetric flow meters |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand SM7420 peut-il être expédié ?
SM7420 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer SM7420 en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour SM7420 et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour SM7420, selon la disponibilité et la destination.
Precise measurement of flow, consumption and medium temperature High accuracy, repeatability and measurement dynamics With switching output, analogue output and pulse output Clearly readable colour display with red/green colour change No inlet and output pipe lengths required Convenient operation via buttons or parameter setting via IO-Link
Caractéristiques
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Measuring range | 0.1...75 l/min; 0.006...4.5 m³/h; 1.2...1190 gph; 0.02...19.82 gpm |
| 0.1...75 l/min | 0.006...4.5 m³/h |
| Process connection | threaded connection Rc 3/4 internal thread DN20 |
Application
| Special feature | Gold-plated contacts |
| Media | conductive liquids; water; hydrous media |
| Note on media | conductivity: ≥ 20 µS/cm; viscosity: < 70 mm²/s (40 °C) |
| Medium temperature[°C] [°C] | -20...90 |
| Pressure rating | 16 bar; 1.6 MPa |
| 16 bar | 1.6 MPa |
Electrical data
| Operating voltage[V] [V] | 18...30 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 80 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | 5 |
| Measuring principle | magnetic-inductive |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
Inputs
| Inputs | counter reset |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; pulse signal; IO-Link; frequency signal; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Number of analogue outputs | 1 |
| Analogue current output[mA] [mA] | 4...20; (scalable) |
| Max. load[Ω] [Ω] | 500 |
| Pulse output | flow rate meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Measuring range | 0.1...75 l/min; 0.006...4.5 m³/h; 1.2...1190 gph; 0.02...19.82 gpm |
| 0.1...75 l/min | 0.006...4.5 m³/h |
| Display range | -90...90 l/min; -5.4...5.4 m³/h; -1426.8...1426.8 gph; -23.78...23.78 gpm |
| -90...90 l/min | -5.4...5.4 m³/h |
| Resolution | 0.1 l/min; 0.006 m³/h; 0.6 gph; 0.01 gpm |
| 0.1 l/min | 0.006 m³/h |
| Set point SP | 0.5...75 l/min; 0.03...4.5 m³/h; 8.4...1189 gph; 0.14...19.81 gpm |
| 0.5...75 l/min | 0.03...4.5 m³/h |
| Reset point rP | 0.1...74.6 l/min; 0.006...4.48 m³/h; 1.2...1183 gph; 0.03...19.71 gpm |
| 0.1...74.6 l/min | 0.006...4.48 m³/h |
| Analogue start point ASP | 0...59.9 l/min; 0...3.6 m³/h; 0...950 gph; 0...15.82 gpm |
| 0...59.9 l/min | 0...3.6 m³/h |
| Analogue end point AEP | 15.1...75 l/min; 0.9...4.5 m³/h; 240...1189 gph; 3.99...19.81 gpm |
| 15.1...75 l/min | 0.9...4.5 m³/h |
| Low flow cut-off LFC | 0.1...3.8 l/min; 0.006...0.23 m³/h; 1.8...59.4 gph; 0.03...0.99 gpm |
| 0.1...3.8 l/min | 0.006...0.23 m³/h |
| Frequency end point, FEP | 15.1...75 l/min; 0.9...4.5 m³/h; 240...1189 gph; 3.99...19.81 gpm |
| Frequency at the end point FRP[Hz] [Hz] | 1...10000 |
| Pulse length[s] [s] | 0.003...2 |
| Pulse value | 0.01...99990000 I |
| Measuring range[°C] [°C] | -20...90 |
| Display range[°C] [°C] | -42...112 |
| Resolution[°C] [°C] | 0.1 |
| Set point SP[°C] [°C] | -19.6...90 |
| Reset point rP[°C] [°C] | -20...89.6 |
| Analogue start point[°C] [°C] | -20...68 |
| Analogue end point[°C] [°C] | 2...90 |
| In steps of[°C] [°C] | 0.1 |
Accuracy / deviations
| Accuracy (in the measuring range) | ± (0,8 % MW + 0,2 % MEW) |
| Repeatability | ± 0,2 % MEW |
| Accuracy[K] [K] | ± 2,5 (Q > 5 % MEW) |
Response times
| Start-up delay[s] [s] | 0...50 |
| Response time[s] [s] | 15; (Q > 10 % MEW, T09) |
| Damping process value dAP[s] [s] | 0...5 |
Software / programming
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; frequency output; current/pulse output; start-up delay; display can be deactivated; Display unit |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Common - I&D; Identification and Diagnosis; Function; Measurement data, standard resolution |
| Common - I&D | Identification and Diagnosis |
| Function | Measurement data, standard resolution |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 3 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 8 |
| Supported DeviceIDs | default; 960 |
| default | 960 |
Operating conditions
| Ambient temperature[°C] [°C] | -20...60 |
| Storage temperature[°C] [°C] | -25...80 |
| Protection | IP 65; IP 67 |
Tests / approvals
| EMC | DIN EN 60947-5-9 |
| CPA approval | model number; 006MI; accuracy class; -; maximum allowable error; ± 1,0 % FS; Q (min); 0,006 m³/h; Q (t); -; Q (max); 4,5 m³/h |
| model number | 006MI |
| accuracy class | - |
| maximum allowable error | ± 1,0 % FS |
| Q (min) | 0,006 m³/h |
| Q (t) | - |
| Q (max) | 4,5 m³/h |
| Shock resistance | DIN IEC 68-2-27; 20 g (11 ms) |
| DIN IEC 68-2-27 | 20 g (11 ms) |
| Vibration resistance | DIN IEC 68-2-6:; 5 g (10...2000 Hz) |
| DIN IEC 68-2-6: | 5 g (10...2000 Hz) |
| MTTF[years] [years] | 114 |
| UL approval | UL approval no.; I014; File number UL; E174189 |
| UL approval no. | I014 |
| File number UL | E174189 |
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight[g] [g] | 848.7 |
| Housing | rectangular |
| Dimensions[mm] [mm] | 110 x 48 x 73 |
| Materials | stainless steel (316/1.4408); stainless steel (316L/1.4404); PC; PBT+PC-GF30 |
| Materials (wetted parts) | stainless steel (316L/1.4404); PEEK; carbon fibre PEEK; FKM |
| Process connection | threaded connection Rc 3/4 internal thread DN20 |
Displays / operating elements
| Display | colour display 1,44", 128 x 128 pixels; 2 x LED, yellow |
Remarks
| Remarks | MW = measured value; MEW = Final value of the measuring range |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
Garantie de 12 moissur tous les articles neufs
Garantie de 3 moissur les pièces d'occasion et reconditionnées
Retours sous 30 jourssans frais de réapprovisionnement sur les pièces non utilisées
Livraison mondialeLivraison rapide et suivie dans le monde entier
