Disponible sur demande
IFM SM4100
Référence: SM4100 · Marque: IFM
Prix sur demande
Demander un devis
Garantie de 12 mois (neuf) · 3 mois (occasion/reconditionné)
Retours sous 30 jours, sans frais de réapprovisionnement sur les pièces non utilisées
Expédié via
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | Magnetic-inductive volumetric flow meters |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand SM4100 peut-il être expédié ?
SM4100 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer SM4100 en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour SM4100 et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour SM4100, selon la disponibilité et la destination.
Precise measurement of flow, consumption and medium temperature High accuracy, repeatability and measurement dynamics With switching output, analogue output and pulse output Clearly visible 4-digit LED display Convenient operation via buttons or parameter setting via IO-Link
Caractéristiques
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Measuring range | 5...3000 ml/min; 0.005...3 l/min |
| 5...3000 ml/min | 0.005...3 l/min |
| Process connection | threaded connection G 1/4 external thread DN6 flat seal |
Application
| Special feature | Gold-plated contacts |
| Application | totaliser function; for industrial applications |
| Installation | connection to pipe by means of an adapter |
| Media | conductive liquids; water; hydrous media |
| Note on media | conductivity: ≥ 20 µS/cm; viscosity: < 70 mm²/s (40 °C) |
| Medium temperature[°C] [°C] | 0...60 |
| Pressure rating | 10 bar; 1 MPa |
| 10 bar | 1 MPa |
| MAWP for applications according to CRN | 8.6 bar; 0.86 MPa |
| 8.6 bar | 0.86 MPa |
Electrical data
| Operating voltage[V] [V] | 18...30 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 80 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | 5 |
| Measuring principle | magnetic-inductive |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
Inputs
| Inputs | counter reset |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; pulse signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 200 |
| Number of analogue outputs | 1 |
| Analogue current output[mA] [mA] | 4...20; (scalable) |
| Max. load[Ω] [Ω] | 500 |
| Analogue voltage output[V] [V] | 0...10; (scalable) |
| Min. load resistance[Ω] [Ω] | 2000 |
| Pulse output | flow rate meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Measuring range | 5...3000 ml/min; 0.005...3 l/min |
| 5...3000 ml/min | 0.005...3 l/min |
| Display range[ml/min] [ml/min] | -1999...3600 |
| Resolution[ml/min] [ml/min] | 1 |
| Set point SP[ml/min] [ml/min] | 20...3000 |
| Reset point rP[ml/min] [ml/min] | 5...2984 |
| Analogue start point ASP[ml/min] [ml/min] | 0...2400 |
| Analogue end point AEP[ml/min] [ml/min] | 600...3000 |
| Low flow cut-off LFC[ml/min] [ml/min] | < 60 |
| Pulse value | 1...3000 ml |
| Pulse length[s] [s] | 0,008...2 |
| Measuring range[°C] [°C] | -20...80 |
| Resolution[°C] [°C] | 0.2 |
| Set point SP[°C] [°C] | -19.2...80 |
| Reset point rP[°C] [°C] | -19.6...79.6 |
| Analogue start point[°C] [°C] | -20...60 |
| Analogue end point[°C] [°C] | 0...80 |
| In steps of[°C] [°C] | 0.2 |
Accuracy / deviations
| Accuracy (in the measuring range) | ± (2 % MW + 0,5 % MEW) |
| Repeatability | ± 0,2 % MEW |
| Accuracy[K] [K] | ± 2,5 (Q > 0,5 l/min) |
Response times
| Response time[s] [s] | 0.15; (dAP = 0, T19) |
| Delay time programmable dS, dr[s] [s] | 0...50 |
| Damping process value dAP[s] [s] | 0...5 |
| Dynamic response T05 / T09[s] [s] | T09 = 40 (Q > 1 l/min) |
Software / programming
| Parameter setting options | Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / normally closed; switching logic; current/voltage/pulse output; start-up delay; display can be deactivated; Display unit |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0; Generic Profiled Sensor; Function; Device identification; Function; Process data variable; Function; Device diagnosis |
| Smart Sensor - SSP 0 | Generic Profiled Sensor |
| Function | Device diagnosis |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 3 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 5 |
| Supported DeviceIDs | default; 671 |
| default | 671 |
Operating conditions
| Ambient temperature[°C] [°C] | -10...60 |
| Storage temperature[°C] [°C] | -25...80 |
| Protection | IP 67 |
Tests / approvals
| EMC | DIN EN 60947-5-9 |
| CPA approval | model number; 007MI; accuracy class; -; maximum allowable error; ± 2,5 % FS; Q (min); 0,0003 m³/h; Q (t); -; Q (max); 0,18 m³/h |
| model number | 007MI |
| accuracy class | - |
| maximum allowable error | ± 2,5 % FS |
| Q (min) | 0,0003 m³/h |
| Q (t) | - |
| Q (max) | 0,18 m³/h |
| Shock resistance | DIN IEC 68-2-27; 20 g (11 ms) |
| DIN IEC 68-2-27 | 20 g (11 ms) |
| Vibration resistance | DIN IEC 68-2-6; 5 g (10...2000 Hz) |
| DIN IEC 68-2-6 | 5 g (10...2000 Hz) |
| MTTF[years] [years] | 144 |
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight[g] [g] | 537 |
| Inlet pipe length | 3 x DN |
| Outlet pipe length | 1 x DN |
| Dimensions[mm] [mm] | Ø 54 / L = 110 |
| Materials | stainless steel (316L/1.4404); PBT-GF20; PC; FKM; TPE |
| Materials (wetted parts) | stainless steel (316L/1.4404); PEEK; EPDM |
| Process connection | threaded connection G 1/4 external thread DN6 flat seal |
Displays / operating elements
| Display | Display unit; 6 x LED, green (ml/min, l/h, l, m³, °C, 10³); switching status; 2 x LED, yellow; measured values; alphanumeric display, 4-digit; programming; alphanumeric display, 4-digit |
| Display unit | 6 x LED, green (ml/min, l/h, l, m³, °C, 10³) |
| switching status | 2 x LED, yellow |
| measured values | alphanumeric display, 4-digit |
| programming | alphanumeric display, 4-digit |
Remarks
| Remarks | MW = measured value; MEW = Final value of the measuring range |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
Garantie de 12 moissur tous les articles neufs
Garantie de 3 moissur les pièces d'occasion et reconditionnées
Retours sous 30 jourssans frais de réapprovisionnement sur les pièces non utilisées
Livraison mondialeLivraison rapide et suivie dans le monde entier
