Disponible sur demande
IFM SBN233
Référence: SBN233 · Marque: IFM
Prix sur demande
Demander un devis
Garantie de 12 mois (neuf) · 3 mois (occasion/reconditionné)
Retours sous 30 jours, sans frais de réapprovisionnement sur les pièces non utilisées
Expédié via
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | Mechatronic sensors |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand SBN233 peut-il être expédié ?
SBN233 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer SBN233 en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour SBN233 et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour SBN233, selon la disponibilité et la destination.
Precise detection of flow in pipes Suitable for water, oils and glycol solutions Precise linearized analogue output Robust housing with very high pressure rating Lifespan of more than 10 million pressure cycles Convenient operation via buttons or parameter setting via IO-Link
Caractéristiques
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Measuring range | 7...360 gph; 0.1...6 gpm |
| 7...360 gph | 0.1...6 gpm |
| Process connection | threaded connection 3/4" NPT internal thread |
Application
| Special feature | Gold-plated contacts |
| Application | for industrial applications |
| Media | Liquids; water; glycol solutions; coolants |
| Note on media | oil 1 with viscosity: 10 mm²/s (104 °F); oil 2 with viscosity: 46 mm²/s (104 °F) |
| Medium temperature[°F] [°F] | 14...212 |
| Pressure rating | 40 bar; 4 MPa |
| 40 bar | 4 MPa |
| MAWP for applications according to CRN[bar] [bar] | 40 |
Electrical data
| Operating voltage[V] [V] | 18...30 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 50 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | < 3 |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; frequency signal; IO-Link; (configurable) |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 150; (per output 2 x 200 (...140 °F); 2 x 250 (...104 °F)) |
| Switching cycles (mechanical) | 10 million |
| Number of analogue outputs | 1 |
| Analogue current output[mA] [mA] | 4...20 |
| Max. load[Ω] [Ω] | 500 |
| Short-circuit protection | yes |
| Overload protection | yes |
| Frequency of the output[Hz] [Hz] | 0...10000 |
Measuring/setting range
| Measuring range | 7...360 gph; 0.1...6 gpm |
| 7...360 gph | 0.1...6 gpm |
| Display range | 0...432 gph; 0...7.2 gpm |
| 0...432 gph | 0...7.2 gpm |
| Resolution | 1 gph; 0.05 gpm |
| 1 gph | 0.05 gpm |
| Set point SP | 2...360 gph; 0.05...6 gpm |
| 2...360 gph | 0.05...6 gpm |
| Reset point rP | 0...358 gph; 0...5.95 gpm |
| 0...358 gph | 0...5.95 gpm |
| Frequency end point, FEP | 24...360 gph; 0.4...6 gpm |
| 24...360 gph | 0.4...6 gpm |
| In steps of | 1 gph; 0.05 gpm |
| Frequency at the end point FRP[Hz] [Hz] | 10...10000 |
| Measuring dynamics | 1:50 |
| Measuring range[°F] [°F] | 14...212 |
| Display range[°F] [°F] | -26...252 |
| Resolution[°F] [°F] | 2 |
| Set point SP[°F] [°F] | 16...212 |
| Reset point rP[°F] [°F] | 14...210 |
| In steps of[°F] [°F] | 2 |
| Frequency start point, FSP[°F] [°F] | 14...172 |
| Frequency end point, FEP[°F] [°F] | 54...212 |
Accuracy / deviations
| Accuracy (in the measuring range) | ± (4 % MW + 1 % MEW); (Q > 0,5 l/min; medium and operating temperature: +71,6 °F ± 4K) |
| Repeatability | ± 1 % MEW |
| Temperature drift | 0,9802 °F / K |
| Accuracy[K] [K] | 3 K (77 °F; Q > 1 l/min) |
Response times
| Response time[s] [s] | 0.01 |
| Damping process value dAP[s] [s] | 0...5 |
| Damping for the analogue output dAA[s] [s] | 0...5 |
| Dynamic response T05 / T09[s] [s] | T09 = 120 (Q > 1 l/min) |
Software / programming
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; current output; medium selection; damping for the switching output / analogue output; display can be rotated and switched off; standard unit of measurement; process value colour |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | Smart Sensor - SSP 0; Generic Profiled Sensor; Function; Device identification; Function; Process data variable; Function; Device diagnosis |
| Smart Sensor - SSP 0 | Generic Profiled Sensor |
| Function | Device diagnosis |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 2 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 3.2 |
| Supported DeviceIDs | default; 566 |
| default | 566 |
Operating conditions
| Ambient temperature[°F] [°F] | 32...140 |
| Note on ambient temperature | medium temperature < 176 °F; medium temperature < 212 °F: 32...104 °F |
| Storage temperature[°F] [°F] | 5...176 |
| Protection | IP 65; IP 67 |
Tests / approvals
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27; 20 g (11 ms) |
| DIN EN 60068-2-27 | 20 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6; 5 g (10...2000 Hz) |
| DIN EN 60068-2-6 | 5 g (10...2000 Hz) |
| MTTF[years] [years] | 145 |
| UL approval | UL approval no.; I005; File number UL; E174189 |
| UL approval no. | I005 |
| File number UL | E174189 |
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight[g] [g] | 754.4 |
| Materials | stainless steel (316L/1.4404); PBT+PC-GF30; PBT-GF20; PC; brass chemically nickel-plated |
| Materials (wetted parts) | stainless steel (316 / 1.4401); stainless steel (316L/1.4404); brass (2.0371); brass chemically nickel-plated; PPS; O-ring: FKM |
| Process connection | threaded connection 3/4" NPT internal thread |
Displays / operating elements
| Display | Display unit; 3 x LED, green; switching status; 2 x LED, yellow; measured values; alphanumeric display, red/green 4-digit; programming; alphanumeric display, 4-digit |
| Display unit | 3 x LED, green |
| switching status | 2 x LED, yellow |
| measured values | alphanumeric display, red/green 4-digit |
| programming | alphanumeric display, 4-digit |
Remarks
| Remarks | Recommendation: use a 200-micron filter.; All data refer to water (68 °F).; MW = measured value; MEW = Final value of the measuring range |
| Notes | Please note the changed housing design! |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
Garantie de 12 moissur tous les articles neufs
Garantie de 3 moissur les pièces d'occasion et reconditionnées
Retours sous 30 jourssans frais de réapprovisionnement sur les pièces non utilisées
Livraison mondialeLivraison rapide et suivie dans le monde entier
