IFM RMA310
Demander un devis
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | Absolute multiturn encoders |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand RMA310 peut-il être expédié ?
RMA310 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer RMA310 en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour RMA310 et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour RMA310, selon la disponibilité et la destination.
Absolute position traceability even when unpowered Bearing operating time measurement for efficient maintenance planning Freely programmable total resolution up to 31 bits Programmable digital switching input/output High shock and vibration resistance thanks to magnetic sensing principle User-friendly communication and parameterisation via IO-Link
Caractéristiques
Product characteristics
| Resolution | 65536 steps; 32768 revolutions; 31 bit |
| Communication interface | IO-Link |
| Shaft design | hollow shaft open to one side |
| Shaft diameter[mm] [mm] | 12 |
Application
| Function principle | absolute |
| Revolution type | multiturn |
| Detection system | magnetic |
Electrical data
| Operating voltage[V] [V] | 18...30 DC; (; to PELV) |
| Rated insulation voltage[V] [V] | 30 |
| Current consumption[mA] [mA] | < 75 |
| Protection class | III |
| Reverse polarity protection | yes |
| Max. power-on delay time[ms] [ms] | 1000 |
| Max. revolution electrical[U/min] [U/min] | 6000 |
Inputs
| Short-circuit protection digital inputs | yes |
Measuring/setting range
| Resolution | 65536 steps; 32768 revolutions; 31 bit |
Accuracy / deviations
| Accuracy[°] [°] | 0.1 |
Software / programming
| Parameter setting options | preset; zero point; direction of rotation; rotational speed |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM3 (230,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | Common - I&D; Identification and Diagnosis; Function; Multiple switching signal; Function; Measurement data, high resolution |
| Common - I&D | Identification and Diagnosis |
| Function | Measurement data, high resolution |
| SIO mode | no |
| Required master port type | A |
| Min. process cycle time[ms] [ms] | 2.3 |
| IO-Link process data (cyclical) | process value; 96; device status; 4; binary switching information; 5 |
| process value | 96 |
| device status | 4 |
| binary switching information | 5 |
| IO-Link functions (acyclical) | application specific tag; operating hours counter; internal temperature; switching cycles counter; shaft movement in hours |
| Supported DeviceIDs | default; 1064 |
| default | 1064 |
| Note | For further information please see the IODD PDF file under "Downloads" |
Operating conditions
| Ambient temperature[°C] [°C] | -40...85 |
| Storage temperature[°C] [°C] | -40...85 |
| Max. relative air humidity[%] [%] | 98; (condensation not permissible) |
| Protection | IP 68; IP 69K |
Tests / approvals
| EMC | DIN EN 61000-4-2 ESD; 4 kV CD; DIN EN 61000-4-3 HF radiated; 10 V/m; DIN EN 61000-4-4 Burst; 2 kV; DIN EN 61000-4-6 HF conducted; 10 V |
| DIN EN 61000-4-2 ESD | 4 kV CD |
| DIN EN 61000-4-3 HF radiated | 10 V/m |
| DIN EN 61000-4-4 Burst | 2 kV |
| DIN EN 61000-4-6 HF conducted | 10 V |
| Vibration resistance | DIN EN 60068-2-6; 20 g / 10...1000 Hz half-sine |
| DIN EN 60068-2-6 | 20 g / 10...1000 Hz half-sine |
| Shock resistance | DIN EN 60068-2-27; 200 g / 11 ms |
| DIN EN 60068-2-27 | 200 g / 11 ms |
| Continuous shock resistance | DIN EN 60068-2-29; 20 g / 6 ms half-sine |
| DIN EN 60068-2-29 | 20 g / 6 ms half-sine |
| MTTF[years] [years] | 283 |
| UL approval | power supply; Class 2 |
| power supply | Class 2 |
Mechanical data
| Weight[g] [g] | 382.5 |
| Housing | cylindrical |
| Dimensions[mm] [mm] | Ø 42 / L = 89.5 |
| Materials | flange: stainless steel (316L/1.4404); housing: stainless steel (444/1.4521) |
| Max. starting torque[Nm] [Nm] | 0.05 |
| Reference temperature torque[°C] [°C] | 20 |
| Shaft design | hollow shaft open to one side |
| Shaft diameter[mm] [mm] | 12 |
| Shaft material | stainless steel (440B/1.4112) |
| Installation depth of shaft[mm] [mm] | 22 |
| Max. axial shaft misalignment[mm] [mm] | 0,5 |
| Fixing flange | Ø 42 mm |
Remarks
| Pack quantity | 1 pcs. |
Electrical connection - plug
| Connector | 1 x M12; coding: A; Moulded body: stainless steel (316 / 1.4401) |
