Disponible sur demande
IFM PN7670
Référence: PN7670 · Marque: IFM
Prix sur demande
Demander un devis
Garantie de 12 mois (neuf) · 3 mois (occasion/reconditionné)
Retours sous 30 jours, sans frais de réapprovisionnement sur les pièces non utilisées
Expédié via
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | Type PN / PE with digital display |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand PN7670 peut-il être expédié ?
PN7670 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer PN7670 en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour PN7670 et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour PN7670, selon la disponibilité et la destination.
Two switching outputs, one of them with IO-Link communication interface Red/green display for clear identification of the acceptable range The process connection can be rotated for optimum alignment With long-term stability thanks to high overload protection Robust design for use in harsh industrial environments Convenient operation via buttons or parameter setting via IO-Link
Caractéristiques
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2 |
| Measuring range | 0...400 bar; 0...5800 psi; 0...40 MPa |
| 0...400 bar | 0...5800 psi |
| Process connection | threaded connection 1/4" NPT external thread |
Application
| Special feature | Gold-plated contacts |
| Measuring element | metallic thin film cell |
| Application | for industrial applications |
| Media | liquids and gases |
| Medium temperature[°C] [°C] | -25...80 |
| Min. burst pressure | 1700 bar; 24650 psi; 170 MPa |
| 1700 bar | 24650 psi |
| Pressure rating | 800 bar; 11580 psi; 80 MPa |
| 800 bar | 11580 psi |
| Type of pressure | relative pressure |
| MAWP for applications according to CRN | 800 bar; 11580 psi; 80 MPa |
Electrical data
| Operating voltage[V] [V] | 18...30 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 35 |
| Min. insulation resistance[MΩ] [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | 0.3 |
| Integrated watchdog | yes |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2 |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2.5 |
| Permanent current rating of switching output DC[mA] [mA] | 150; (200 (...60 °C) 250 (...40 °C)) |
| Switching frequency DC[Hz] [Hz] | < 170 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Measuring range | 0...400 bar; 0...5800 psi; 0...40 MPa |
| 0...400 bar | 0...5800 psi |
| Set point SP | 3...400 bar; 49...5802 psi; 0.3...40 MPa |
| 4...400 bar | 40...5800 psi |
| Reset point rP | 1...398 bar; 20...5773 psi; 0.1...39.8 MPa |
| 2...398 bar | 20...5780 psi |
| Min. difference between SP and rP | 2 bar; 30 psi; 0.2 MPa |
| 2 bar | 30 psi |
| In steps of | 1 bar; 1 psi; 0.1 MPa |
| 3...400 bar | 49...5802 psi |
| 1...398 bar | 20...5773 psi |
| 1 bar | 1 psi |
Accuracy / deviations
| Switch point accuracy[% of the span] [% of the span] | < ± 0,5 |
| Repeatability[% of the span] [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K) |
| Characteristics deviation[% of the span] [% of the span] | < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) |
| Hysteresis deviation[% of the span] [% of the span] | < ± 0,25 |
| Long-term stability[% of the span] [% of the span] | < ± 0,05; (per 6 months) |
| Temperature coefficient zero point[% of the span / 10 K] [% of the span / 10 K] | 0,2; (-25...80 °C) |
| Temperature coefficient span[% of the span / 10 K] [% of the span / 10 K] | 0,2; (-25...80 °C) |
Response times
| Response time[ms] [ms] | < 3 |
| Delay time programmable dS, dr[s] [s] | 0...50 |
Software / programming
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Display unit |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| SIO mode | yes |
| Required master port type | A; (when pin 2 not connected: B) |
| Supported DeviceIDs | Factory setting / CMPT = 2; 450; Status_B High Resolution / CMPT = 3; 627 |
| Factory setting / CMPT = 2 | 450 |
| Status_B High Resolution / CMPT = 3 | 627 |
| Note | For further information please see the IODD PDF file under "Downloads" |
| Profiles | Smart Sensor - SSP 3.1; Measuring Sensor; Common - I&D; Identification and Diagnosis |
| Smart Sensor - SSP 0 | Generic Profiled Sensor |
| Function | Device diagnosis |
| Min. process cycle time[ms] [ms] | 3 |
| IO-Link resolution pressure | 0.2 bar; 0.02 MPa |
| 1 bar | 0.1 MPa |
| IO-Link process data (cyclical) | pressure; 16; device status; 4; binary switching information; 2 |
| pressure | 16 |
| binary switching information | 2 |
| IO-Link functions (acyclical) | application specific tag |
| Smart Sensor - SSP 3.1 | Measuring Sensor |
| Common - I&D | Identification and Diagnosis |
| 0.2 bar | 0.02 MPa |
| device status | 4 |
Operating conditions
| Ambient temperature[°C] [°C] | -25...80 |
| Storage temperature[°C] [°C] | -40...100 |
| Protection | IP 65; IP 67 |
Tests / approvals
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27; 50 g (11 ms) |
| DIN EN 60068-2-27 | 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6; 20 g (10...2000 Hz) |
| DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
| MTTF[years] [years] | 214 |
| UL approval | UL approval no.; J003 |
| UL approval no. | J003 |
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight[g] [g] | 239 |
| Housing | cylindrical |
| Dimensions[mm] [mm] | Ø 34 / L = 90.7 |
| Materials | stainless steel (630/1.4542/17-4 PH); stainless steel (316L/1.4404); PBT+PC-GF30; PBT-GF20; PC |
| Materials (wetted parts) | stainless steel (630/1.4542/17-4 PH) |
| Min. pressure cycles | 100 million |
| Tightening torque[Nm] [Nm] | 2...3 turns after hand-fastening; recommended tightening torque; depends on the lubrication, the seal and the pressure load |
| Process connection | threaded connection 1/4" NPT external thread |
| Restrictor element integrated | no (can be retrofitted) |
Displays / operating elements
| Display | Display unit; 3 x LED, green (bar, psi, MPa); switching status; 2 x LED, yellow; measured values; alphanumeric display, red/green 4-digit |
| Display unit | 3 x LED, green (bar, psi, MPa) |
| switching status | 2 x LED, yellow |
| measured values | alphanumeric display, red/green 4-digit |
Remarks
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
Garantie de 12 moissur tous les articles neufs
Garantie de 3 moissur les pièces d'occasion et reconditionnées
Retours sous 30 jourssans frais de réapprovisionnement sur les pièces non utilisées
Livraison mondialeLivraison rapide et suivie dans le monde entier
