IFM LW2160
Demander un devis
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | Non-contact level measurement |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand LW2160 peut-il être expédié ?
LW2160 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer LW2160 en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour LW2160 et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour LW2160, selon la disponibilité et la destination.
80 GHz radar enables level measurement with millimetre precision of up to 10 metres Non-contact measuring principle: no malfunctions due to deposits or wear Direct measurement or through non-metallic walls Simple installation and maintenance-free operation Remote sensor parameter setting and level monitoring via connection to the IT system Intuitive set-up and visualisation of the measured data using the ifm Vision Assistant software
Caractéristiques
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
| Process connection | G 1 Aseptoflex Vario |
Application
| Special feature | Gold-plated contacts |
| Dielectric constant of the medium | ≥ 2 |
| Recommended media | water; hydrous media |
| Process temperature[°C] [°C] | -40...150; (see diagram and note under remarks) |
| Maximum speed of the change of level[mm/s] [mm/s] | 200 |
| Pressure rating[bar] [bar] | 8 |
| Note on pressure rating | 0 bar at medium temperature < - 20 C |
| Vacuum resistance[mbar] [mbar] | -1000 |
| Radio approval for | Malaysia; India; Philippines; Indonesia |
Electrical data
| Operating voltage[V] [V] | 18...30 DC |
| Current consumption[mA] [mA] | < 80 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | < 15 |
| Measuring principle | FMCW (80 GHz technology); frequency range 76 - 77 GHz |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; IO-Link |
| Electrical design | PNP/NPN |
| Number of digital outputs | 1; (2 parameterisable) |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2.5 |
| Permanent current rating of switching output DC[mA] [mA] | 50 |
| Number of analogue outputs | 1 |
| Analogue current output[mA] [mA] | 4...20, invertible; (scalable) |
| Max. load[Ω] [Ω] | 43,5 * (Ub – 18) + 600 Ω |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Measuring range[m] [m] | 10; (see diagram:) |
| Blocking distance[mm] [mm] | 0...400; (depending on the operating conditions: see diagram:) |
| Sampling rate[Hz] [Hz] | > 3 |
Accuracy / deviations
| Accuracy | ± 2 mm |
| Resolution[mm] [mm] | 1 |
| Zero signal (current)[mA] [mA] | 3.8 |
| Full signal (current)[mA] [mA] | 20.5 |
| Temperature drift per 10 K | ± 1 mm |
Response times
| Response time[ms] [ms] | 330 |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 3.1; Measuring Sensor; Common - I&D; Identification and Diagnosis; Function; Multiple switching signal |
| Smart Sensor - SSP 3.1 | Measuring Sensor |
| Common - I&D | Identification and Diagnosis |
| Function | Multiple switching signal |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 1 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 6 |
| Supported DeviceIDs | default; 1611 |
| default | 1611 |
Operating conditions
| Ambient temperature[°C] [°C] | -40...80 |
| Note on ambient temperature | see diagram: |
| Storage temperature[°C] [°C] | -40...90 |
| Protection | IP 68; IP 69K |
Tests / approvals
| EMC | DIN EN 61326-1; group 1: Class A (IO-Link active); B (IO-Link not active, with analogue and switching outputs) |
| DIN EN 61326-1 | group 1: Class A (IO-Link active); B (IO-Link not active, with analogue and switching outputs) |
| Shock resistance | DIN EN 60068-2-27; 50 g (11 ms) / 20 g (6 ms) |
| DIN EN 60068-2-27 | 50 g (11 ms) / 20 g (6 ms) |
| Vibration resistance | IEC 61298-3; 2 g (10...1000 Hz) |
| IEC 61298-3 | 2 g (10...1000 Hz) |
Mechanical data
| Weight[g] [g] | 721.3 |
| Materials | stainless steel (316L/1.4404); PA; FKM; FVMQ |
| Materials (wetted parts) | PTFE; EPDM; FVMQ when used without Aseptoflex Vario adapter |
| Process connection | G 1 Aseptoflex Vario |
| Surface characteristics Ra/Rz of the wetted parts | Ra < 0.76 µm |
Remarks
| Notes | An IO-Link master and a parameter setting software (e.g. moneo or LR DEVICE) are required for initial set-up.; For high process temperatures: The temperature at the process connection is decisive. The actual medium temperature may be higher.; use according to FDA compliance only in conjunction with a hygienic adapter |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
